家居室内环境的“低碳”设计思考

目前家居装饰装修市场繁荣,人们伴随着经济实力的提升而追求居住环境的舒适性、豪华性、美观性的愿望得已实现,但设计师和客户都应理性的对待居住空间的过分装饰和纯粹的美观性,应注重营造实用、绿色低碳的家居空间环境,顺应社会发展的要求。本文通过对家居空间"低碳"设计的分析,倡导家居空间环境应健康节能、选择低碳的装饰装修设计。     

Improvement of rainwater infiltration and storage capacity by an enhanced seepage well: From laboratory investigation to HYDRUS-2D numerical analysis

Seepage well is an emerging Low Impact Development (LID) technology that can effectively control the storm runoff. However, its rainwater infiltration rate and storage capacity still require further enhancement. By setting a horizontal infiltration structure at the bottom of conventional rainwater seepage well (CSW), an enhanced seepage well (ESW) was proposed in this study, and its infiltration performances compared with the permeable pavement (PP) and the CSW were systemically investigated using static infiltration experiment and HYDRUS-2D simulation. The results showed that the infiltration efficiency of ESW was significantly higher than that of PP and CSW, and the process of water infiltrated through soil mainly controlled the macroscopic infiltration rate. The Nash-Sutcliff Efficient (NSE) index was used to evaluate the accuracy and reliability of the HYDRUS-2D model, and the results of NSE values greater than 0.75 (varied between 0.75 and 0.91) confirmed the applicability of HYDRUS-2D to describe correctly the hydraulic behavior of the ESW system. Simulation infiltration tests showed that the ESW performed a higher average infiltration rate and fewer total runoff volume than the CSW, indicating the effectively enhancement of the infiltration and water retention capacity of ESW, especially under heavy rainfall intensities. Additionally, the ESW system exhibited an excellent runoff-control and rainwater retention capacity in an actual rainfall scenario.     

低能耗蓝牙4.0协议原理与实现方法

介绍了最新的蓝牙技术规范4.0协议中低能耗部分的协议原理以及协议架构。讨论了在分层结构通信协议实现中遇到的主要问题和应对的策略。结合通信协议实现的通常策略,讨论了低能耗蓝牙4.0协议实现的方法与策略。     

Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge

For a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge, the relationship between the corrosion rate of the bridge and the composition of the rust layers formed on the girders was first investigated. These corrosion rates were clearly classified by the protective ability index (PAI) of α/γ^∗ and (β + s)/γ^∗, where α, γ^∗, β and s are the mass ratio of crystalline α-FeOOH, the total of γ-FeOOH, β-FeOOH and the spinel-type iron oxide (mainly Fe₃O₄), β-FeOOH and spinel-type iron oxide, analyzed by XRD, respectively. The inequality of the former index α/γ^∗ > 1 expressed the protectiveness criterion of the rust layer, while that of the latter index, (β + s)/γ^∗< 0.5 or > 0.5, classified the corrosion rate of the non-protective rust layer. The PAI is useful for a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge and is an important item for the corrosion assessment of the bridge.     

La3+ 掺杂对 CeO2 红外发射性能的影响研究

随着飞行器飞行速度和发动机燃烧室温度的提高, 金属类隐身涂层材料已无法满足环境使用要求。 CeO2 具有较高熔点、 抗氧化、 较低红外发射率等特点, 被认为是红外隐身应用的候选材料, 但其发射率仍无法满足 高温红外隐身需求。 本文通过固相反应法对 CeO2 进行 La3+ 掺杂改性, 研究掺杂量对 CeO2 粉体红外发射性能的 影响规律。 结果表明, 随着掺杂量从 10 mol% 增加到 30 mol%, 粉体在 3~6 μm 波段的发射率不断降低, 其中 Ce0.7La0.3O2 的红外发射率仅为 0.1。     

An electrochemical method for the preparation of Mg–Li alloys at low temperature molten salt system

Mg–Li alloys have been prepared by electrolysis in a molten salt electrolyte of 50% LiCl–50% KCl (mass%) at low temperature of 420–510 °C. The effects of electrolytic temperature and cathodic current density on alloy formation rate and current efficiency were studied. For the deposition of metallic lithium on the cathode consisting of solid Mg and liquid Mg–Li, both electrolytic temperature and cathodic current density have no obvious influence on current efficiency; while for the deposition of metallic lithium on the solid magnesium cathode, both electrolytic temperature and cathodic current density greatly affect alloy formation rate and current efficiency. The optimum electrolysis condition is—molten salt mixture, LiCl:KCl = 1:1 (mass%), electrolytic temperature: 480 °C, cathode current density: 1.13 A cm⁻². Mg–Li alloys with low lithium content (about 25 wt% Li) were prepared via electrolysis at low temperature following by thermal treatment at higher temperature.     

纺机织轴边盘的金属型低压铸造

介绍了采用金属型低压铸造生产边盘所涉及的设备、模具、工艺 ,并对产品质量和经济效益进行了分析     

锰对低铬白口铸铁组织及硬度的影响

系统研究了Ｍｎ对水平连铸低铬白口铸铁铸态及正火态组织和硬度的影响。结果表明，Ｍｎ＞２．０％之后对组织有较大影响，由于出现（Ｍ＋Ａ）组成物，使基体硬度显著提高，这将大大改善了低铬白口铸铁中碳化物与基体硬度的相对关系。试验证实，Ｍｎ＞３％之后明显改善硬度分布均匀性。还讨论了使低铬锰白口铸铁具有最佳综合性能的合理含Ｍｎ量范围     

The effects of water pollution on the immersion corrosion of mild and low alloy steels

The short-term immersion corrosion of mild and low alloy steels in seawaters is known to be proportional to the concentration of dissolved oxygen (DO) in the bulk water. Longer-term corrosion is a function of the activity of sulphate-reducing bacteria and is influenced by the concentration of nutrients in the bulk water. These influences are examined in more detail for the corrosion of steels in the brackish waters of the River Thames and for several immersion corrosion sites on the Eastern Australian seaboard and in the North Sea. The published data sources were supplemented with plausible assumptions about environmental conditions. New interpretations of the data are provided based on the previously published model for immersion corrosion. For waters with negligible salinity and sulphate levels early corrosion loss was shown to depend on the dissolved oxygen content of the waters, and later corrosion loss was a direct function of nitrogenous nutrient (pollution) levels. This also applies to longer-term corrosion.     

Environmental effects on the stress corrosion cracking susceptibility of 3.5NiCrMoV steels in high temperature water

Constant elongation rate tests (CERTs) were carried out to investigate the effects of environmental factors of dissolved oxygen and temperature on the stress corrosion cracking (SCC) susceptibility of 3.5NiCrMoV turbine steels. Tests were conducted in pure water of various dissolved oxygen concentrations at temperatures of 50 °C-200 °C in the range of strain rates from 5 × 10⁻⁸/s to 1 ×  10⁻⁶/s. Dissolved oxygen significantly affected the SCC susceptibility of turbine steels in water. The SCC susceptibility of the turbine steels increases as the dissolved oxygen concentration in water increases. The elongation of the turbine steels tested in aerated water at 150 °C at a strain rate of 1 × 10⁻⁷/s decreased to half of that of the steels tested in deaerated water in the same test condition. And the SCC susceptibility of the steels increased with decreasing strain rate, and with increasing temperature. The increase of the SCC susceptibility of the turbine steels in the higher dissolved oxygen environment is considered to be due to the higher content of dissolved oxygen enhancing the reduction reactions of oxygen on the metal surfaces (cathode) and accelerating the dissolution rate at the crack tips (anode) by galvanic attack of an aeration cell.