Φ76mm自动轧管机组穿孔机顶杆小车的改进

通过校核Φ７６ｍｍ自动轧管机组穿孔机顶杆小车的轴承寿命，提出了顶杆小车的改进措施，如重新选配合适的轴承型号，修改有关装配尺寸等。改进后，顶杆小车的使用效果良好。     

叠轧薄板轧机轧辊轴承的改进

本文针对安阳钢铁公司薄板厂叠轧薄板轧机轧辊轴承轴瓦容易损坏、沥清润滑油冒烟起火这一问题，通过实验方法，找出了原因，并对大铜瓦进行了改进，取得了良好效果。     

Heat and Moisture Transfer in Wet Sand Exposed to Solar Radiation—Models and Experiments Concerning Buried Objects

One promising method of locating buried objects, such as land mines, is to use optical systems for detecting contrasts in surface temperature. With enhanced knowledge about the interacting physical processes behind these temperature contrasts, it is possible to improve detection precision. In such a context, moisture movement in the soil and moisture evaporation from the surface have been found to be of particular interest. This study was based on indoor experiments on wet and dry sand exposed to radiation from a solar panel. Simulations of heat and moisture transfer conducted with a one-dimensional model are also presented for the experiments. The calculations were successful in accurately predicting surface temperatures for both wet and dry sand, making it possible to predict surface temperatures under different conditions. These findings will contribute to increasing the probability of successful detection of buried objects under real conditions using optical methods.     

我国第一套Φ170mm三辊轧管机组

介绍了我国第一套Φ１７０ｍｍ三辊轧管机组热轧设备和产品规格及技术特点。     

半连续式棒材轧机在线捆扎机及其工艺设置

由北京冶金设备制造厂设计的YSK6型钢丝捆扎机，共设有并列6台棒材捆扎车，每台捆扎车由中间收送机、成形捆扎机、液压装置、捆扎辊道和台车组合而成。按生产工艺参数要求，整个成型捆扎周期为30秒。捆扎后的棒材在成品称重时用电子秤，每称量一次均可打印出单次净值、累加值和累加次数值。     

Modified oil agglomeration process for coal beneficiation. III. Grinding and agglomeration using different szego mill designs

The simultaneous grinding/agglormeration process has been used to beneficiate Minto coal. Experiments with the Szego Mill, a planetary ring-roller mill with grooved rollers, have given good results. Different roller ridge/groove sizes have been tested and favourable oil-coal-water ratios established. Ash removal is closely related to grinding performance. Very short mill residence times, of the order of 10 seconds, are sufficient for microagglomerate formation. Considerable equipment and operating cost savings are possible with the modified process.     

三辊穿孔和轧管所产生的钢管壁厚极差和波浪形内螺纹

定量描述了实际生产过程中三辊斜轧穿孔所产生的钢管壁厚极差和波浪形内螺纹，初步探讨了三辊轧管机对钢管壁厚极差和波浪形内螺纹的影响。     

Φ450轧机厚控系统的改造设计

介绍对轧机厚控系统的改造设计,详细描述其控制系统硬件构成、软件设计、控制模型的组成及特点。     

An investigation into the occurrence of sewage fungus in rivers containing papermill effluents—IV. Growth in experimental channels dosed with effluents and pure compounds

Wastewaters from the manufacture of pulp and paper have given rise to problems of excessive microbial growth in rivers over a number of years. This paper is the first in a series of four articles describing research undertaken by PIRA at four U.K. paper/board mills (one integrated with pulp production) over the period 1978–1980. This first paper briefly reviews the published literature on sewage fungus growth from pulp and paper mill discharges up to 1978, but mainly describes previously unpublished work undertaken by PIRA over the period 1965–1975. This introductory paper thus provides a state-of-the-art review of methods to control sewage fungus growth from pulp and paper mill effluents prior to commencement of the research described in the following three articles.     

1422轧机滑块式万向接轴的故障及处理

以热轧板厂粗轧主传动滑块式万向接轴为例，分析了该接轴及接轴平衡机构的常见故障及其排除方法，提出了日常维护措施。