济钢中板工艺技术结构的优化

济南钢铁厂于１９８８年进行了增建４辊精轧机和增设３号加热炉为主体的中板工艺技术改造，在生产中对原料生产、中板轧制、精整等工艺技术结构进行了一系列优化组合，取得了良好的效果。为了适应市场需求将继续对中板进行工艺技术结构优化，调整产品结构。     

磨机大齿轮对缝处产生张口的初探

针对大中型磨机大齿轮对缝处在使用中会产生张口现象而降低其使用寿命的问题,从分析产生张口的原因入手,通过理论计算,提出设计的配合间隙,并指出在安装与使用中应注意的问题.     

机械研磨 Ni_(50)B_(50)合金形成非晶的过程

本文研究了机械研磨 Ni_(50)B_(50)合金非晶的形成过程。唯象地提出用 J-M-A 方程描述此过程,并作了简单的讨论。     

中速球磨机运行中振动原因分析及消除措施

中速球磨机由于其独特的优点受到电厂的欢迎，但在运行过程中时有振动现象发生，影响了磨煤机及锅炉机组安全运行。本文根据磨煤体振动大与磨煤机电流的变化规律，针对ZQM-216型中速球磨机运行中的振动原因进行分析，并提出消除措施，以供同类型机组参考。     

Electricity generation from rice husk in Indian rice mills: Potential and financial viability

Rice husk generated as a by-product of rice processing is an important energy resource. The availability of this resource in India has been assessed and the technologies for exploitation of its energy potential in rice processing industry discussed. Nomographs have been developed for estimation of the husk required to meet the energy demand of parboiling, drying and milling operations. The unit cost of electricity using rice husk gasifier-based power generation systems has been calculated and its financial feasibility assessed in comparison with utility-supplied and diesel-generated electricity. With the cost and efficiency data assumed here, the unit cost of electricity produced by rice husk gasifier-dual fuel engine-generator system varies between Rs 2/kWh and Rs 7/kWh. (Note: 35 Rs approximates to $US 1.)     

如何正确地提高轧机工作机座的刚度

本文着重分析和讨论了提高轧机工作机座刚度的三种途径：　合理提高零部件刚度、短应力线机座、预应力机座。指出某些错误概念与问题，阐述了如何正确地提高轧机工作座的刚度。     

Catalytic wet air oxidation of butyric acid solutions using carbon-supported iridium catalysts

Aqueous solutions of butyric acid were treated by catalytic wet air oxidation using carbon-supported iridium catalysts in a stirred reactor. Under the operating conditions of 6.9 bar of oxygen partial pressure and 200 °C of temperature, conversions up to 52.9% after 2 h were obtained depending on the type of catalyst used. The effects of butyric acid initial concentration, loading of catalyst, oxygen partial pressure and temperature were investigated and the empirical rate law for acid conversion is presented. Oxidation intermediates such as propionic and acetic acid were identified. The heterogeneous catalyzed free-radical oxidation of butyric acid is discussed.     

2300mm三辊中板轧机的加宽改造及维修性设计

本文就三辊轧机的改造要点及“维修性设计”在三辊轧机改造中的应用做了技术分析和论述。     

覆膜滤料的滤尘性能测试方法研究

由于覆膜滤料的结构和性能有别于普通滤料，因而普通滤料的滤尘性能测试方法不完全适用于覆滤料。本文作者在总结实践经验的基础上，提出了在覆膜滤料的滤尘性能测试中应注意的一些问题和应增加的测试项目。     

An investigation of carbon nanotube jet grinding

Since their observation in 1976 and 1991, carbon nanotubes (CNTs) have generated much interest due to their properties and potential applications. CNTs are tubular carbon molecules with remarkable mechanical, electrical, chemical and thermal properties, which make them useful in various applications. Industries producing CNTs via the fluidized bed chemical vapor deposition technique face challenges related to the size of CNT bundles. The two main challenges are agglomeration and agglomerate size distribution control. A solution to these challenges involves the use of jet mills to grind the CNT agglomerates. The goal of this study was to determine whether the nanotubes could be ground with air jets using a commercial jet mill and apply a two-parameter model to describe the grinding process. The present study has indicated that air-jet grinding of CNTs is feasible with a typical commercial jet mill. This paper presents the effect of operational parameters on the arithmetic mean diameter of the ground product. Sonic velocity through the grinding nozzles was required to obtain reasonable grinding rates and relatively narrow particle size distributions. This occurs at high air to solids feedrate ratios. Additionally, a simple attrition model can describe the grinding process in the spiral jet mill.