安钢高线粗中轧机导卫设计特点

介绍了安钢自行设计的高线粗中轧机导卫装置的设计原则和特点。     

1270轧机弹性曲线的回归及参数估计

首先介绍了轧机弹性曲线的基础知识及 1 2 70轧机AGC系统的基本结构 ,然后论述了数据采集的方法 ,最后根据最小二乘法得到轧机弹性曲线的回归模型及刚度系数的实验结果。     

提高拉刀耐用度的挤压工艺

拉刀在刃磨过程中存在不易获得定值前角且会降低刀具硬度等问题，为此设计了拉刀前刀面挤压工艺．该工艺简便易行，一把拉刀可挤压5—8次，效益好。使用证明，经挤压加工后的拉刀加工的零件精度高，且拉刀的使用寿命可提高30%以上。     

干磨干选工艺在赤城选矿厂中的应用

赤城鑫宇选矿厂工艺流程设计中采用了干磨干选的新工艺，用来处理全铁品位为13％左右的原矿。该工艺中将原矿用干式棒磨机磨至4mm～0mm，然后进行干式磁选甩尾，甩尾产率达到36％，甩尾后原矿TFe位可达到18％，提高了入湿磨、选别的品位，有效地降低了下段磨矿的费用。该工艺投入运行后，生产情况良好。     

初轧机主传动系统扭转自激振动的稳定性

用变量摄动法对初轧机主传动系统扭转自激振动的稳定性进行了初步研究，讨论了稳定性条件，为初轧机打滑状态的诊断、监测提供了参考依据。     

国外工具磨床发展现状

本文综述了近睥来国外工具磨床技术的发展现状，介绍了由CNC技术带来的几种新的磨削方法，分析了当代工具磨床典型产品的技术水平。     

Production of phosphoric acid with low content of impurities

The present work is to study the possibility for controlled distribution of the impurities when they are decomposed by sulphuric acid to wet phosphoric acid and phosphogypsum, as well as generating technological conditions for production of clean wet phosphoric acid and its derivatives - phosphoric fertilizers, food phosphates and other phosphoric products.A coefficient of distribution D_A is introduced as a general criterion for elements dispersion. The study includes relationships between the weight ratio sulphuric acid/natural phosphate and D_A; the period of decomposition and D_A; the particle's size content of the natural phosphate and D_A. The obtained experimental data and relationships about the influence of the above discussed technological parameters on dispersion of more than 23 elements allow for control of that process in wet phosphoric acid and phosphogypsum by selecting specific technological conditions. Thus, depending on the requirements of acid's consumers and procedures for secondary processing of phosphogypsum to end-products, a selective decomposition of the natural phosphates to phosphoric acid and phosphogypsum can be carried out with content of the impurities in those products varying in narrow limits.     

连续式棒线材轧机孔型系统的选择

论述了连续式棒线材轧机孔型系统的种类和特点，介绍了粗轧机组和中轧机组孔型系统的选择原则和方法。     

PWR核电站蒸汽发生器停堆湿保养工况联氨的缓蚀作用

一、引言压水堆(PWR)核电站蒸汽发生器(SG)管材因二回路系统腐蚀产物积累发生应力腐蚀开裂,这是SG传热管破损的主要原因之一。维修和更换SG使PWR停运期间所需要的替用电力对发电站造成很大的财政负担,同时,二回路系统的腐蚀产物沉积在蒸汽发生器内,降低     

Φ90mm圆盘延伸机前卡钢分析

探讨了造成Φ90mm圆盘延伸机前卡钢的原因,分析了轧件轧制过程中的第一、第二次咬入的受力情况,提出了预防前卡钢的措施。该措施实施后,基本消除了前卡钢现象。