小波分析与漏磁检测信号处理

详细介绍了小波分析的基本理论,并将其引入到钢管漏磁探伤信号的分析中,可以去除噪声、压缩数据和检测奇异性,而且为缺陷的定性和定量分析提供了新的判定方法.     

Detection of water ingress in composite sandwich structures: a magnetic resonance approach

Water ingress inside honeycomb sandwich panels during service has been linked to in-flight failure in some aircraft. There is an ongoing effort to develop nondestructive testing methods to detect the presence of water within the panels. Magnetic resonance (MR) represents an attractive approach in that it is sensitive to moisture. Using a unilateral MR sensor, testing can be applied directly to the surface of the panel. The viability of MR is demonstrated through laboratory imaging of both water within sandwich panels, as well as the adhesive itself. The detection of water using a one-sided handheld MR sensor is presented. It is shown that simple detection, as well as spatial localization of water within sandwich panels is possible.     

高浓度熟料溶出的工艺研究

优化烧结法生产 ,提高产量、节约能耗是氧化铝生产急需解决的问题之一。实现高浓度溶出可以提高精液浓度 ,减少湿法系统物料流量 ,达到提高产能、增加产量、降低成品成本的目的。本文通过对国内外高浓度熟料溶出发展情况和烧结法影响高浓度溶出的因素进行分析研究 ,提出了提高熟料A/S的必要性 ;指出了适合我国条件的熟料A/S大小和生料配方 ;分析了温度和αk 对溶出和分离的影响机理和规律 ;提出了适合高浓度溶出的溶出条件和浓度大小。对生产有一定的指导意义。     

金属磁记忆检测技术概况及初步应用

介绍金属磁记忆检测技术的背景、发展、现状、目的和意义，用两个应用实例初步评价了磁记忆检测技术的有效性，提出了磁记忆技术发展的近期和远期目标，展望了应用前景。     

Corrosion of metals and alloys in mixed gas environments at elevated temperatures

The attack of nickel, cobalt, iron, and alloys of these metals containing chromium and aluminum, by gases containing sulfur-oxygen, carbon-oxygen, and nitrogen-oxygen has been studied at temperatures of 600 and 900°C. The degradation of these metals and alloys was characterized by using standard analytical techniques with emphasis on optical metallography. Three types of accelerated degradation were identified for the attack of alloys by gases containing another oxidant in addition to oxygen. One type of degradation occurred because of the formation of reaction products composed of mixtures of phases involving both of the oxidants. Another type resulted from the reaction of second oxidant phases with oxygen. The third form of degradation involved the development of less protective phases due to thermodynamic instabilities. Thermodynamic stability diagrams are used to help account for the effects produced by different elements in the alloys.     

压力容器无损检测 --长管拖车气瓶的无损检测技术

长管拖车是新类型的压力容器,作为一种高效运输工具,在许多领域应用广泛。综述了国内外拖车气瓶在制造和使用过程采用的各种无损检测方法及标准。方法包括超声、磁粉、渗透和声发射检测等。并介绍了各种无损检测方法的特点。     

高速切削机床中的磁轴承

高效化是机械制造的永恒主题之一。本文简介了高速切削的理论依据及其优点，分析了磁悬浮轴承的原理、特点以及磁浮轴承在高速切削机床上的应用情况，从而说明了磁浮轴是高速切削机床最理想的轴承之一。     

CNG储气瓶的金属磁记忆检测

使用金属磁记忆检测方法和超声方法对在役的七组公交车CNG高压储气瓶组进行了检测,并对比分析了两种方法的检测结果。结果表明,金属磁记忆方法检测到的可疑区域涵盖了超声检测到的缺陷区域,因此用磁记忆方法检测高压储气瓶,有较高的可靠性和高效性。     

深过冷Fe76B12Si12超细晶材料的凝固组织与软磁性能

首次采用深过冷加水淬的方法,成功地制备了直径为16 mm的样品,高为15 mm,组织中颗粒平均尺寸约为120nm左右的Fe76B12Si12合金超细晶材料.其磁损耗P1T400和P1T1000分别为普通硅钢片的40%和65%.系统研究了组织类型及Fe2B(Si)相尺度对该合金软磁性能的影响,发现该合金的最佳软磁性能位于Fe2B(Si)相完全粒化的非规则共晶组织区,并且当Fe2B(Si)相尺寸细化至0.36～0.50μm时,其软磁性能随着相尺寸的减小而大幅度改善.对以上结果产生的原因进行了讨论.     

铁精矿粒度对球团强度的影响

以大红山、曼南坎和滇滩等精矿的粒度以及膨润土用量和润磨时间为因子,以生球落下强度、生球爆裂温度、预热球抗压强度和焙烧球抗压强度为评价指标,进行了五因子二次回归组合实验研究。结果表明:随着铁精矿小于0.074mm粒级含量的增加,生球爆裂温度下降,预热球和焙烧球抗压强度提高;当铁精矿小于0.074mm粒级含量小于75%(质量分数)时,生球落下强度逐渐上升,当小于0.074mm粒级含量为75%时,生球落下强度达到最大值,之后有下降趋势。并不是铁精矿粒度越细球团强度就会越好,铁精矿粒度还应该满足一个合适的粒度组成。