A family of lower- and higher-order transversal linearization techniques in non-linear stochastic engineering dynamics

Sample pathwise numerical integration of noise-driven engineering dynamical systems cannot generally be performed beyond a limited level of accuracy, especially when the noise processes are modelled using (filtered) white noises. Recently, a locally transversal linearization (LTL) strategy has been proposed by the author (Proc Roy Soc London A 2001; 457 :539–566) for direct integration of deterministic and stochastic non-linear dynamical systems. The present effort is focussed on a host of extensions along with detailed theoretical error analyses of the linearization approach, especially as applied to problems in non-linear stochastic engineering dynamics. Thus, to begin with, estimates of local and global error orders in the basic LTL scheme are obtained separately for the displacement and velocity vectors when the system is driven either by a set of additive noises or by an arbitrary combination of (independently evolving) additive and multiplicative noises. Following this, a new family of higher-order LTL schemes is proposed in order to improve upon the basic LTL method and the associated error orders are established. A stepwise implementation of the lower- and higher-order versions of the LTL method, along with certain computational aspects, is also outlined. The proposed schemes are numerically illustrated, to a limited extent, for a single degree-of-freedom (SDOF) and a two degree-of-freedom (TDOF) non-linear engineering systems under additive and/or multiplicative white noise excitations. Copyright © 2004 John Wiley & Sons, Ltd.     

A Modified Variational-Gradient Method for Quasilinear Equations

A modified variational-gradient method is proposed and substantiated for quasilinear operator equations in a Hilbert space.     

试论双点后方交会简便公式

根据双点后方交会的图形特点和已知条件，列出了方程组，推导出了双点后方交会直接计算座标的简便公式，同时求出了精度计算公式，以供测量人员参考     

用作图法测定R50的理论分析

研究了步、机枪射击密集度试验中弹着点半经的顺序统计量，给出了作图法测定Ｒ_（５０）的理论分析，得到了作图法是测定Ｒ_（５０）的好方法的结论．     

PSD激光直线度测量仪

介绍了采用PSD传感器设计的激光直线度测量的工作原理，以及激光器、光靶和计算机系统的设计。     

一种新的含水率校正方法

从研究流体流动规律出发,结合模拟井实验结果,建立了多参数、非线性的半理论和半实验含水率校正模型,提出了反映两相滑脱效应的滑动比概念,其计算方法物理意义清晰并具有明确的收敛边界。与模拟井实验结果进行对比,使用平方法降低了含水率校正误差。     

计算机存储系统的9位字节单向错误检测码

本文介绍了一种计算机存储系统中的单向错误检测码，系统构成采用９位字节，其中８位数据位，１位校验位，并使用一个单独的附加奇偶校验字节。单向错误检测码有两类，一类每个字包含固定的奇偶校验位；另一类每个字节包含的检验位的构成方式是任意的。     

CNC中插补和轴伺服的微机仿真

本文级出了在ＰＣ机上对一个自己开发ＣＮＣ系统插祉和轴伺服控制进行仿真的结果。它包含按插补原理对直线、圆和渐开线的插补以及对轴伺服控制中的位置环和前馈控制的仿真。轴伺服马达通过一个二阶连续系统模型来仿真，最后得出对伺服进行前馈控制补偿可显著改善系统的输出。     

Voigt线型及其精确快速算法

通过把上半复平面分为４个区，并在每一区利用不同近似，建立了一种精确快速计算Ｖｏｉｇｔ函数、修正的Ｖｏｉｇｔ函数和Ｖｏｉｇｔ函数偏导数的算法，其最大相对误差小于５×１０－４．该算法是Ｌｉｎｅ－ｂｙ－Ｌｉｎｅ大气透过率／辐射强度计算及其相关应用的有效算法．     

球头碗球面加工组合机床设计

根据球面形成原理,利用铣刀和工件的两个圆运动,合成球头碗的不完整内球面。采用组合机床,结构简单,调整、维护方便,主轴弹性卡头便于工件装卸。对零件尺寸、形状和位置误差进行了分析。通过对铣刀和主轴电机的变频调速,找出最佳切削参数,实现了内球面的高效率高精度加工。