高职院校绩效工资制度存在的问题及对策——以武汉某职院人事分配制度为背景

为了最大程度地调动教职工的积极性和创造性,提高办学质量和办学效率,高职院校纷纷进行人事分配制度改革。由于高职院校存在着教师教育教学活动的投入难以可靠计量、教育教学活动的产出难以可靠测量以及教学效果难以可靠评估等特殊性,导致高校绩效工资制度的改革难以达到"效率优先,兼顾公平"的预期效果。本文以武汉某职院人事分配制度的改革方案为背景,由个别到一般,分析高职院校绩效工资改革存在的不足,并就如何进一步优化高职院校绩效工资制度改革提出意见和建议。     

Numerical Simulation of Internal Oxidation of Steels during Annealing Treatments

This paper presents a new model for simultaneous diffusion and precipitation of chemical elements in metallic matrices, a scheme for its numerical solution, and several applications to problems of internal oxidation. The model basically stands as an extension of the classical Wagner model for internal oxidation of steels, but is more much general in that it allows for an arbitrary number of diffusing chemical elements, an arbitrary number of precipitate phases with arbitrary compositions, dependence of diffusion coefficients and solubility products upon (time-dependent) temperature, etc., thus allowing for a much broader range of applications. As a counterpart, it is generally impossible to solve the complex, non-linear equations of the model analytically, but this can be done numerically. The simple but efficient numerical scheme proposed is based on explicit 1D finite differences. Experience has shown that this scheme, in spite of its rusticity and the restrictions it imposes on the time-step, is more efficient than more elaborate strategies based on the finite-element method. The applications presented are concerned with internal oxidation of steels during annealing processes. The model and associated numerical scheme allow for evaluation of the amounts of the various oxide precipitates in the external layer of the sheet. This opens the way, through numerical parametric studies of the influence of the process parameters and the chemical composition, to the improvement of existing treatments and the development of new steel grades.     

Sensitivity analysis based preform die shape design using the finite element method

This paper uses a finite element-based sensitivity analysis method to design the preform die shape for metal forming processes. The sensitivity analysis was developed using the rigid visco-plastic finite element method. The preform die shapes are represented by cubic B-spline curves. The control points or coefficients of the B-spline are used as the design variables. The optimization problem is to minimize the difference between the realized and the desired final forging shapes. The sensitivity analysis includes the sensitivities of the objective function, nodal coordinates, and nodal velocities with respect to the design variables. The remeshing procedure and the interpolation/transfer of the history/dependent parameters are considered. An adjustment of the volume loss resulting from the finite element analysis is used to make the workpiece volume consistent in each optimization iteration and improve the optimization convergence. In addition, a technique for dealing with fold-over defects during the forming simulation is employed in order to continue the optimization procedures of the preform die shape design. The method developed in this paper is used to design the preform die shape for both plane strain and axisymmetric deformations with shaped cavities. The analysis shows that satisfactory final forging shapes are obtained using the optimized preform die shapes.     

论焊接结构生产的技术改造

本文讨论了焊接结构生产技术改造的有关问题，包括总思路及总目标、自动化的基本框架、按低成本自动化的原则设计生产线和关键技术问题的论述。     

大剂量Si-Mn复合孕育剂在铸铁中的应用

从例证和机理两方面来说明通过大剂量Si Mn复合孕育在铸铁中的应用 ,使Mn的作用得到充分发挥 ;Mn13是提高铸铁组织中珠光体量和性能的理想元素 ;通过调节大剂量Si Mn复合孕育剂中Mn的比例来稳定和提高基体组织中的珠光体量 ,达到稳定和提高铸铁性能的目的 ,它的可操作性比通过控制化学成分来稳定和提高铸铁的性能更好更容易 ,冲天炉熔炼效果更明显。     

Special-shaped tube drawing forming and conformal optimization of die cavity

Aiming at the issues in quick processing and modeling design of drawing special-shaped tube die, by Conformal Mapping Theory and the numerical trigonometry method of interpolation between odd points and even points, the conformal mapping function is obtained. As the result, three-dimension drawing forming were converted into that of two-dimension problems, and the plastic stream function was analyzed, die cavity modeling and its optimized function were set up. Combining with modern processing technology, NC program and CAM of die cavity can be realized. Taking the drawing forming of hexagon tube with arc radii r and ellipse-shaped tube as instances, the drawing die cavity optimization of special-shaped tube was achieved, as well as, the changing principle of wall thickness was analyzed.     

基于正交试验的注塑成型工艺参数CAE模拟设定

运用基于CAE技术的注塑工艺参数优化配置和注塑工艺方案设计的思想,结合正交试验设计方法对工艺参数进行CAE仿真试验,并以零件翘曲变形为优化目标,通过敏感因子分析,获得最佳工艺参数组合.经注塑机试模和三坐标测量机的检测分析,验证了CAE模拟结果的准确性和最佳工艺参数组合在实际生产中的效果.     

模具生产联合体加工作业统一调度问题的研究

模具生产联合体是由小规模企业组成的模具设计、制造联盟，由于设备、工装和人员分属于不同的加盟企业，其作业排序过程非常复杂。为此提出一种复合式模具生产联合体的生产排序方法：依据基本优先规则首先完成单一工序作业，然后对多工序作业用改进遗传算法进行工艺优化，求出最优解和次优解，再使用评价函数法选择最佳作业路线。该方法在生产试验中取得了良好的成效．能较好满足模具用户和加盟企业两方面的需要。     

有关C语言教学方法优化的探讨

C语言程序设计是一门重要的课程,却难学难教。教学方法优化十分必要。教学方法优化应从激发学生兴趣入手,采用循序渐进的方式,着重培养学生举一反三的编程能力,引导学生写出高质量的程序,并丰富考核方式。