�����������ɺͼӹ��е�һЩ��������

本文简要介绍了国外在开发超酸性气体过程中遇到的材料选择、腐蚀监测、水化物堵塞、超酸性气的处理和加工等问题所采取的措施和办法。     

Cohesive stresses and size effect in quasi-brittle materials

A novel approach to the derivation of Bažant’s size effect law is presented. Contrarily to the original Lagrangian derivation which hinged on energetic consideration, a Newtonian approach based on local stress intensity factors is presented. Through this approach, it is shown that Bažant’s size effect law is the first (and dominant) term in a series expansion for the nominal stress. Furthermore, analytical expressions forB are derived for selected specimen geometries.     

如何正确选择合适的耐蚀材料

文章较全面的介绍了如何根据设备、装置、构件所处的工作环境及使用条件进行防腐蚀设计,及其防腐蚀设计的内容和注意事项,选择合适的防腐蚀材料,确保产品的使用寿命     

Development of sealing compositions with nanostructure iron-based fillers

The possibility of utilizing nanopowders of iron and Fe-Co-Ni produced bu a thermochemical method in the fabrication of sealing composition materials is investigated. It is established that such hermetic sealing composition materials function reliably under extremal conditions and guarantee elevated strength of adhesion to the surface of the metal and high corrosion and temperature stability. __________ Translated from Poroshkaya Metallurgiya, Nos. 3–4(448), pp. 112–117, March–April, 2006.     

Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.     

氯碱生产中的腐蚀与防护

介绍了氯碱装置中介质的腐蚀特性、常用材料的耐腐蚀特性及应用实例。     

Flammability characteristics at applied heat flux levels up to 200 kW/m2

This paper documents the first of the two interrelated studies that were conducted to more fundamentally understand the scalability of flame heat flux, the motivation being that it has been reported that flame heat flux back to the burning surface in bench‐scale experiments is not the same as for large‐scale fires. The key aspect was the use of real scale applied heat flux up to 200kW/m² which is well beyond that typically considered in contemporary testing. The main conclusions are that decomposition kinetics needs to be included in the study of ignition and the energy balance for steady burning is too simplistic to represent the physics occurring. An unexpected non‐linear trend is observed in the typical plotting methods currently used in fire protection engineering for ignition and mass loss flux data for several materials tested and this non‐linearity is a true material response. Using measured temperature profiles in the condensed phase shows that viewing ignition as an inert material process is inaccurate at predicting the surface temperature at higher heat fluxes. The steady burning temperature profiles appear to be invariant with applied heat flux. This possible inaccuracy was investigated by obtaining the heat of gasification via the ‘typical technique’ using the mass loss flux data and comparing it to the commonly considered ‘fundamental’ value obtained from differential scanning calorimetry measurements. This comparison suggests that the ‘typical technique’ energy balance is too simplified to represent the physics occurring for any range of applied heat flux. Observed bubbling and melting phenomena provide a possible direction of study. Copyright © 2007 John Wiley & Sons, Ltd.     

带肋钢筋套筒挤压连接的质量控制

针对太原可口可乐综合厂房主筋采用φ28、φ32三级钢存在的可焊性差的问题，提出了在施工中采用套筒挤压连接的方式，并对该方法的操作要点及质量控制措施进行了总结。     

Evaluation of capital cost data. part 7: Liquid waste disposal with emphasis on physical treatment

Capital cost correlations are given for oil-water separators, equalization basins, primary clarifiers, clarifiers and clarifier mechanisms, reverse osmosis unit, ultrafiltration units, gravity filters and miroscreens. Data are included for raw sewage, intermediate and recirculation pumping stations and for preliminary treatment (or bar screens, grit removal, overflow and bypass chamber and Parshall flume), for grit removal, comminution and gas stripping. The correlations are accurate to ± 30%, expressed in Canadian dollars and adjusted to a Marshall and Swift value of 1000. Details as to what components are included in the cost are given. Data are given for the labour and material costs to create a working process module. For inflation indices, a critique of the Engineering News Record, EPA small city, Marshall and Swift, Chemical Engineering and Southam inflation indices suggested that the Marshall and Swift index is most appropriate for the construction and process equipment studied here. Concerning the currency exchange, for the equipment and processes in this study, equipment costs the same whether expressed directly in US or Canadian dollars. To put the current data into perspective, several hundred sources of cost data were analyzed. The major correlations are compared, on a consistent basis, with current data.