ZnHZSM-5催化丙烷芳构化的失活动力学研究

在等温积分反应器中实验研究了由丙烷制取轻质芳烃BTX（苯、甲苯及二甲苯）的芳构化过程中，锌改性的HZSM－5催化剂的积炭失活对反应过程的影响，通过对常压、不同反应温度下的实验数据所进行的动力学分析，建立起了失活动力学模型，并通过拟合实验数据对模型做了筛选，最终确定了基于Langumir-Hinshelwood模型的反应速率方程和由独立失活机理推出的2级独立失活速率方程，该模型对深入了解轻烃芳构化反应及指导反应器设计均具有重要的意义。     

马来酸酐接枝聚乙烯对无卤阻燃PE-HD护套料的改性研究

研究了马来酸酐接枝聚乙烯对无卤抑烟阻燃PE-HD护套料的改性效果，并进行了增韧机理上的探讨。采用扫描电镜对复合材料进行了断面观察，并测试了材料的力学性能、流变性能、耐热性能和氧指数。结果表明，马来酸酐接枝聚乙烯能够极大地提高复合材料的界面相容性，增强材料的界面相互作用，提高阻燃剂微粒在树脂基体中的分散效果，同时形成了一个可塑性界面层，所以能够提高材料的韧性。     

锌灰制备活性氧化锌新工艺

以炼锌厂废锌灰为原料，经硫酸浸取制备活性氧化锌，考察了工艺条件对锌浸出率的影响。实验结果表明：锌灰在50℃浸取，酸用量40g／L，可使锌的溶出率达92．8％。碱式碳酸锌最佳水解温度为40℃，水解时间为2h，pH为7．5时，溶液中锌质量浓度为10g／L，得到96％以上的水解率。采用该工艺制得的氧化锌符合HG／T2572-1994。     

Ionic elastomer blends of zinc salts of maleated natural rubber and carboxylated nitrile rubber: Effect of grafted maleic anhydride

Zinc neutralized maleated natural rubbers (Zn‐MNR) were prepared by solution grafting and neutralization with zinc acetate in one‐step. It was later used for blending with carboxylated nitrile rubber (XNBR) in the composition of 50/50 parts by weight. The effect of grafted anhydride content (1.2, 1.6, 2.0, and 2.5% wt of NR) on the tensile properties of ionic rubber blends (Zn‐MNR/XNBR) was investigated. The tensile strength of the ionic blends was found to be greater than those of pure rubbers. The modulus, tensile, and tear strength of the blends dramatically increased with increasing levels of grafted anhydride. The ionic rubber blends also possessed superior physical properties compared to those of the corresponding nonionic rubber blends (MNR/XNBR). Dynamic mechanical thermal analysis and scanning electron microscopic studies were performed to verify the process of mixing. Fourier transform infrared spectroscopic studies were carried out to characterize the nature of specific intermolecular interactions between Zn‐MNR and XNBR chain segments. The results indicated that the ion‐ion (Zn⁺ ‐COO^?) interactions between Zn‐MNR and XNBR are formed at the interface, which provides the mean of compatibilization in the ionic rubber blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

填充玻璃纤维滤膜基钛酸锶钡的手控注射式富集器对水中锌的富集性能

以多孔玻璃纤维滤膜基钛酸锶钡（BBST）为吸附材料,制备了手控注射式富集器;考察了该富集器对水中Zn2＋的吸附富集性能.结果表明：当介质的pH值为3-7时,多孔玻璃纤维滤膜基钛酸锶钡对水中的Zn2＋具有很强吸附能力,其静态吸附容量为24.30 mg/g;制备的富集器可实现对Zn2＋的动态吸附,被吸附的Zn2＋可用2.0%的EDTA溶液动态洗脱回收,其浓集因子可达500.提出了手控注射式钛酸锶钡富集器富集,火焰原子吸收光谱法测定水中痕量Zn2＋的新方法.方法检出限为0.09μg/L.应用于一次蒸馏水和纯净水中痕量Zn2＋的富集,用火焰原子吸收法测定,回收率为93.0%-102.0%.     

Effects of dispersant on performance of Ni-Zn batteries

A new additive of sodium hexametaphosphate (SHMP) was introduced to the paste of zinc electrode, with the purpose of preventing the zinc active materials from agglomerating and improving the stability of batteries. The properties of the zinc electrodes were characterized by scanning electron microscopy (SEM), constant current charge/discharge measurement, self-discharge test and hydrogen collection experiment. The photographs of zinc electrode show that SHMP can significantly break up the agglomeration, uniformize the particle distribution and increase the surface area, which are advantageous to improve the electrochemical performance of zinc electrode. The experimental battery shows a 97 times cycling life and a 30.2% remaining capacity after 4 d storage. The hydrogen collection experimental results indicate that the SHMP can decrease the ratio of hydrogen evolution. Therefore, the corrosion of zinc electrode is suppressed and the charge/discharge efficiency is enhanced.     

复合白云石表面链状纳米CaCO_3的制备

在Ca(OH)_2-H_2O-CO_2反应体系中,根据非均匀成核原理,通过调整体系反应温度、Ca(OH)_2浓度、ZnSO_4添加量等反应参数,控制在白云石颗粒表面生成具有链状结构的纳米Ca-CO_包覆层.利用SEM,XRD等检测表征手段,分析了不同反应参数对纳米CaCO_3晶形的影响.结果表明:当反应温度为25℃,ZnSO_4加入量为Ca(OH)_2的4%,Ca(OH)_2浓度为0.3mol/L时,在白云石颗粒表面生成了长径比为7:1的链状纳米CaCO_3.提高体系的反应浓度能够减少ZnSO_4的加入量.     

CaO—SiO2-FeO—Cl体系中Zn、Pb挥发物的热力学研究

应用FaetSage热力学软件对不同温度下的FeO—CaO—SiO2-Cl体系中Zn、Ph挥发行为进行分析,采用气流携带法对FeO—CaO-SiO2-Cl体系中Zn、Pb挥发物的饱和蒸气压进行测定,并通过试验分析了温度对其体系中Zn、Pb挥发率的影响。结果表明,温度为970～1030K条件下FeO-CaO-SiO2-Cl体系中Zn、Pb主要以氯化物形式存在,氯化物的饱和蒸气压均随着温度的升高而增加,且InP～1／T呈较好的线性关系,其体系中Zn、Pb挥发率亦随着温度的升高而增加。     

FeO-CaO-SiO2-Al2O3-ZnO—PbO-Cl体系中Zn、Pb氯化物饱和蒸气压的测定

采用气流携带法对FeO-CaO-SiO2-Al2O3-ZnO-PbO-Cl体系中Zn、Pb氯化物的饱和蒸气压进行测定,并对温度、渣成分、Cl含量等影响因素进行了分析。结果表明,温度为970～1030K条件下FeO-CaO-SiO2-Al2O3-ZnO-PbO-Cl体系中Zn、Pb氯化物饱和蒸气压均随着温度的升高而增加,且P1）氯化物蒸气压值的对数与温度的倒数之间呈较好的线性关系。碱度、FeO含量均对Zn、Pb氯化物的饱和蒸气压影响很大,低碱度可提高Zn、Pb氯化物的饱和蒸气压,高FeO含量虽可增加ZnCl2饱和蒸气压,却降低了Pb氯化物的饱和蒸气压。Cl含量越高,该体系中Zn、Pb氯化物的饱和蒸气压越大。     

Investigations of ZnO thin films deposited by a reactive pulsed laser ablation

Highly transparent ZnO thin films were deposited at different substrate temperatures by pulsed laser deposition in an oxygen atmosphere. The thin films were characterized by various techniques including X-ray diffraction, scanning electron microscopy, optical absorption, and photoluminescence. We demonstrated that oriented wurtzite ZnO thin films could be deposited at room temperature using a high purity zinc target. Variable temperature photoluminescence revealed new characteristics in the band edge emission. The underlying mechanism for the observed phenomena was also discussed.