Anodising potential influence on well-ordered nanostructures formed by anodisation of aluminium in sulphuric acid

High-density structures with relatively well-ordered nanopore arrays have been obtained by the self-ordering growth of nanopores occurring during anodisation of aluminium in sulphuric acid. The resulting array of well-ordered nanopores strongly depends on an applied voltage of anodising, temperature and a procedure of synthesis. Regular arranged hexagonal arrays on aluminium with a relatively uniform pore diameter, interpore distance, and depth of pores exceeding 90 μm, can be formed by the self-ordering two-step anodising at 1 °C. The interpore distance and the pore diameter were evaluated on anodised aluminium layers obtained at different cell potentials ranging from 15 to 25 V. The detailed analyses of their uniformity were performed from SEM images. The analysis of a pore arrangement defects was made from SEM top view images taken on samples anodised at various cell potentials. The defect maps, known as Delaunay triangulations, of the arrangement of about 1000 pores were constructed for different applied anodising potentials. The percentage of pores that are not six-fold coordinated by the neighbouring pores indicates the percentage of defected surface.     

Influence of Ti Powder Characteristics on Combustion Synthesis of Porous NiTi Alloy

Porous NiTi shape memory alloy (SMA) is a novel biomedical material used for human hard tissue implant .The influence of elemental titanium powder characteristics such as powder morphology, particle size and specific surface area( SSA) on the minimal ignition temperature ,combustion temperature and final product of porous Ni-Ti SMA fabricated by combustion synthesis method was investigated in this paper by scanning electron microscopy (SEM) and laser diffraction.The preliminary data indicated that the titanium powder characteristics had a strong effect on combustion synthesis of porous NiTi SMA.     

NUMERICAL ANALYSIS OF THE EFFECTS OF LOCAL HYDRODYNAMICS ON MASS TRANSFER IN HETEROGENEOUS POROUS MEDIA

Many engineering problems require the estimation of mass transfer coefficients in porous materials. In heterogeneous materials or in cases where mass transfer sites are not spatially uniform, empirical equations for mass transfer coefficients vary widely, and the origin of these differences is not well understood. In this article, we use a stochastic algorithm to model mass transfer from single particles in a two-dimensional heterogeneous packed bed. The computed mass transfer coefficients are used to generate a distribution of local Peclet numbers in the bed. Detailed hydrodynamics are then used to interpret variations in the local Peclet number. The results show clear relationships between pore structure, streamline patterns, and mass transfer rates.     

FLOW OF NEWTONIAN FLUIDS THROUGH SINUSOID ALLY CONSTRICTED TUBES. NUMERICAL AND EXPERIMENTAL RESULTS

Numerical and experimental predictions of pressure drops in the flow of Newtonian fluids through sinusoidally constricted tubes (SCT) are carried out. The numerical evaluations analyzed in this work are obtained from the following methods: Geometric Iteration (GJM), Geometric Iteration with First and Second Upwinds (GIM1, GIM2), Successive Over Relaxation by Line (SORBLM), Global Galerkin Spectral Method (GGSM), Collocation (CM) and Dufort-Frankel (DFM). The GIM1, GIM2 and SORBLM are applied to SCT and explained in this work. The other methods have been previously reported in the literature with the same purpose. Experiments are accomplished for constrictions of approximately 40,60 and 80% of the average tube diameter and results compare well with numerical predictions of the steady flow. It is concluded that special attention should be given to evaluations of the friction factor ƒ for Reynolds numbers Re between the onsets of flow separation and turbulence due to flow instability. Finally, the SCT as a model for porous media (PM) is discussed.     

铵油炸药在炮孔爆破中的应用

文章介绍了在炮孔直径小于100mm条件下,尤其是光面和预裂爆破中,使用铵油炸药的体会及有关施工工艺.     

应用多孔阳极氧化电流—时间曲线比较壁垒膜厚

在有壁垒膜存在的表面,多孔膜的生长在氧化初期受到延迟阻碍,这一现象在直流恒压多孔阳极氧化电流一时间曲线上反映出来。电流达到稳态氧化的时间愈长,壁垒膜愈厚。文中应用此法判断了0.5MH_3BO_3介质的pH值、温度对壁垒阳极氧化膜厚的影响,并应用记录同一介质环境壁垒恒流阳极氧化的槽压一时间曲线得到验证。     

Electrical characterization of porous BaTiO3 using impedance spectroscopy in humid condition

The humidity response characteristics of La doped BaTiO₃ with different sintered densities and room temperature electrical conductivities were investigated using complex impedance measurement. The samples with low density and high resistivity showed the large and nearly linear sensitivity to the change of humidity. The impedance spectra of samples, when exposed to high humidity, can exhibit microstructure-related features, even though they do not give rise to a noticeable characteristic change when exposed to low humidity. The observed impedance patterns were dependent upon the density, and hence the oxidation kinetics of BaTiO₃.