某小型无人机超低空飞行潜能的挖掘

为在不修改飞行控制规律且保持原有飞行品质的前提下,使某小型无人机实现超低空飞行功能,对其潜 能进行挖掘。利用无线电高度表获取无人机相对海平面的实际高度值;设计数据采集转发盒,截获原气压高度值, 与无线电高度表值相融合后参与无人机超低空飞行控制;截获遥测信息,将无线电高度表值替换掉非重要数据,利 用原测控信道下传给地面站,由地面指挥操作人员下达指令,并通过实际飞行检验。结果表明,通过这些措施实现 了该小型无人机超低空飞行的目的。由此得出结论：该方法可行,措施有效,可适用于对外购无人机进行部分性能 提升和功能拓展的应用场合。     

浅谈RS-485串行总线及其通信实现

以某消声水池研制为基础,由与编码器之间的通信,结合理论知识,在总线匹配、网络连接方式和接地等问题上,对RS-485串行总线通信问题进行了详细分析。综合考虑消声水池现场的实际限制因素,给出了硬件相应解决方法和软件通信实现开发方面需注意的问题,再予以验证,有效地提高了其通信的可靠性。     

基于W5100的RS485-Ethernet数据转换器设计

为了提高分布式系统的数据通信性能,采用以太网和RS485总线的集成使用,在不改变原有网络结构的情况下,将RS485总线控制系统改造为以太网分布式控制系统,设计了一种低成本的基于W5100和STC单片机的RS485-以太网协议转换器。在介绍转化器的作用环境基础上,对其硬件结构和软件设计做了简要介绍。经使用证明,设计的转换器可实现RS485和以太网2个网络的透明通信,实现远距离、快速和可靠的数据传输,具有一定的实用性和推广价值。     

串行通信接口的实用设计方法

详细介绍了RS-485、RS-232的实用设计方法以及在实际应用中的解决方案.     

基于AD9244和PCI9054的虚拟无线电接收子系统

虚拟无线电是软件无线电技术一种新的发展趋势,基本思路是利用计算机取代传统软件无线电系统中的DSP芯片,一般采用直接中频采样技术,将采样结果通过PCI总线送入主机内存,由用户软件做后续的信号处理.本文讨论了欠采样技术在中频信号接收系统中的应用,由此提出了一种虚拟无线电接收子系统实现的硬件设计方案,然后对系统中重要芯片的性能进行了介绍,并对系统的控制过程进行了详细说明,最后简要介绍了一些注意事项.     

TMS320F240与PC机串行通讯的设计

简要介绍了数字信号处理器TMS320F240串行通信接口模块SCI和RS－485标准接口芯片MAX485的原理和应用，并给出了TMS320F240与PC机串行通信接口电路，最后，编程实现了串行通信。     

Efficient RC low-power bus encoding methods for crosstalk reduction

In on-chip buses, the RC crosstalk effect leads to serious problems, such as wire propagation delay and dynamic power dissipation. This paper presents two efficient bus-coding methods. The proposed methods simultaneously reduce more dynamic power dissipation and wire propagation delay than existing bus encoding methods. Our methods also reduce more total power consumption than other encoding methods. Simulation results show that the proposed method I reduces coupling activity by 26.7-38.2% and switching activity by 3.7%-7% on 8-bit to 32-bit data buses, respectively. The proposed method II reduces coupling activity by 27.5-39.1% and switching activity by 5.3-9% on 8-bit to 32-bit data buses, respectively. Both the proposed methods reduce dynamic power by 23.9-35.3% on 8-bit to 32-bit data buses and total propagation delay by up to 30.7-44.6% on 32-bit data buses, and eliminate the Type-4 coupling. Our methods also reduce total power consumption by 23.6-33.9%, 23.9-34.3%, and 24.1-34.6% on 8-bit to 32-bit data buses with the 0.18, 0.13, and 0.09 μm technologies, respectively.     

非线性设备与编辑录像机遥控部分的接口技术

从RS—232C，RS—422接口标准及RS—232C与RS—422的电平转换等方面详细地介绍非线性设备与编辑录像机遥控部分的硬件接口技术，给出了相关的电路原理图，指出了使用时的一些注意事项。     

Timing analysis of network on chip architectures for MP-SoC platforms

Recently, the use of multiprocessor system-on-chip (MP-SoC) platforms has emerged as an important integrated circuit design trend for high-performance computing applications. As the number of reusable intellectual property (IP) blocks on such platforms continues to increase, many have argued that monolithic bus-based interconnect architectures will not be able to support the clock cycle requirements of these leading-edge SoCs. While hierarchical system integration using multiple smaller buses connected through repeaters or bridges offer possible solutions, such approaches tend to be ad hoc in nature, and therefore, lack generality and scalability. Instead, many different forms of network on chip (NoC) architectures have been proposed in the past few years to specifically address this problem. We believe that the NoC approach will ultimately be the preferred communication fabric for next generation designs. To support this conjecture, this paper demonstrates, through detailed circuit design and timing analysis that different proposed NoC architectures to date are guaranteed to achieve the minimum possible clock cycle times in a given CMOS technology, usually specified in normalized units as 10-15 FO4 delays. This is contrasted with the bus-based approach, which may require several design iterations to deliver the same performance when the number of IP blocks connected to the bus exceeds certain limits.     

基于单片机的电动球阀老化检测台

为了提高IC卡水表和热表的质量和使用寿命,表的重要组件电动球阀使用前需进行老化和检测,很多生产厂家采用人工检测,效率较低,应厂家要求特设计了电动球阀老化检测台。主要采用了单片机技术,红外检测技术和现场网络通信技术。