SO_4~(2-)-TiO_2/Al_2O_3固体超强酸催化合成苹果酯-A和苹果酯-B的研究

通过浸渍法制备了SO42--TiO2/Al2O3固体超强酸催化剂,用Hammett指示剂法测定了其酸强度;以乙酰乙酸乙酯和乙二醇、1,2-丙二醇为原料,合成了苹果酯-A和苹果酯-B,考察了催化剂的焙烧温度、TiO2的负载量、反应温度、反应物配比、催化剂用量等因素对反应的影响以及催化剂的重复使用性。结果表明,在425～575℃温度范围内,SO42--TiO2/Al2O3体系可以形成超强酸;在苹果酯-A和苹果酯-B合成中具有催化活性高、催化速率快、化学稳定性好,重复使用性佳、无环境污染;在最佳条件下,苹果酯-A和苹果酯-B的收率分别可达89.3％和91.5％,质量分数为97％～99％。     

影响固态发酵速率的因素及其动力学

论述了固态发酵过程中基质的形态特性、基质含水量、通气速率与气体组成、发酵温度诸因素对发酵速率的影响；探讨了固态发酵过程动力学模型及其特征。     

Solid extraction of caffeine and theophylline from green tea by molecular imprinted polymers

This paper involves a feasibility study on using molecular imprinted polymers as the sorbent materials in solid phase extraction for caffeine and theophylline from green tea. Two kinds of MIPs, with caffeine-theophylline mixture and pentoxifylline-theophylline mixture as the templates respectively, MAA as the monomer, EDMA as the crosslinker and ATBN as the initiator, were applied to this purpose. Mixture solution of caffeine and theophylline (1 Μg/ ml in acetonitrile) was applied to the solid extraction cartridges following a load, wash and elute procedure with acetonitrile, methanol, methanol-acetic acid (90/10, v/v) as the solvents, respectively. This solid phase extraction protocol was applied for extraction of caffeine and theophylline from green tea. Comparison between the results obtained with the MIPs cartridges and a traditional C₁₈ reversed-phase cartridge was made. It showed that the MIP-based sorbent on the solid phase extraction was comparable with that of C₁₈ material. HPLC analysis using a C₁₈ column (5 Μm, 250× 4.6 mm from Rstech corporation), methanol: water (60 :40, v/v) as the mobile phase at a flow rate of 0.6 ml/min was applied for the quantitative determination.     

pH玻璃电极的现状与发展

对pH玻璃电极的结构、原理以及特性进行了综述.与液体充填式玻璃电极比较,固体接触式pH玻璃电极有明显的优点.叙述了固体接触式pH玻璃电极膜的成分及其响应机理,并指出固体接触式pH玻璃电极的发展方向.     

Aldol condensation of campholenic aldehyde and MEK over activated hydrotalcites

In this paper, activated Mg-Al hydrotalcites were used as catalysts in the aldol condensation of campholenic aldehyde and methyl ethyl ketone (MEK). These materials represent an attractive alternative to less environmentally friendly liquid bases in a number of base-catalyzed reactions involved in the pharmaceutical and fragrance industries. The presence of basic hydroxyl groups in the interlayer space leads to very active materials. However, the relation between the activity of reconstructed hydrotalcites and the rehydration procedure is still not well understood. Different rehydration protocols in combination with extensive characterization studies were performed, including XRD, SEM, IR spectroscopy and TPD of CH₃CN and CH₃NO₂. The materials were tested as catalysts in the aldol condensation of campholenic aldehyde and MEK, and relationships between the catalytic performance of the activated hydrotalcites and the rehydration procedure were derived. Several factors may influence the activity and selectivity of this reaction, such as the reaction temperature, the molar ratio of the reactants and the degree of rehydration of the hydrotalcite-like catalysts. The selectivity towards the formation of the desired branched isomer increases when performing the reaction at low temperatures.     

固体酸催化合成草酸二乙酯的应用研究

以粉煤灰、活化剂、硫酸为主要原料经活化、陈化、浸泡、焙烧等处理制得的固体酸催化剂，应用于草酸二乙酯的合成中取得了良好的催化效果。实验发现，当醇酸摩尔比为3．5、催化剂用量为草酸的5％、反应时间在4h时，酯产率可达81.8％，该催化剂具有贮存稳定性高、可重复使用、制备工艺简单、原料成本低廉等特点，是一种易于工业化应用的环境友好固体酸催化剂。     

气固下行流化床反应器Ⅱ气固两相的流动规律

气固下行流化床反应器气固两相流动过程是比较复杂的，沿轴向气固两相运动可分为第一加速、第二加速和恒速３个运动段，沿径向局部气体速度、颗粒速度和颗粒浓度都具有不同程度的不均匀性。而这种不均匀性是由气固两相顺重力场湍动运动所决定的。和循环床提升管相比，下行管反应器气固两相沿径向分布的不均匀性得到有效地改善，气固可以实现超短接触操作，因而是一种新型高效气固超短接触反应器     

解析“自然叠加法”在建筑环境设计中的应用——以新镇区建筑环境设计为例

人与自然的关系不能仅停留在相互依赖的层面上,人类应借助自己的思想与智慧。主动的与自然和谐共处。并处理好为促进人类发展而进行的。对于自然环境局部必要的改造与利用。譬如在改造自然环境时,应尊重自然发展规律;在利用自然资源时。应考虑可持续发展等问题;在对建筑与环境的设计实践中,应找寻出可依据的自然规律,保护、尊重环境及科学、合理的利用自然。并以恰当的方式应用手设计实践,这就是文章的研究主旨。     

Investigation of LSM/8YSZ cathode within an all-ceramic SOFC,Part II: Optimization of performance and co-sinterability

This paper focuses on the cathode and current collector layers of a co-sintered, all-ceramic solid oxide fuel cell (SOFC) concept. Challenges to reach good electrochemical performance have to be overcome, due to more demanding manufacturing conditions, including a relatively high co-sintering temperature. Master sintering curves show that the sintering activity of lanthanum strontium manganite (LSM) is significantly higher than that of 8-mol% yttria stabilized zirconia (8YSZ). By applying a double-layered cathode and a current collector with optimized microstructures the best electrochemical performance of the cathode is 0.26 $\mathrm{\Omega }$cm${}^2$ at 800 $°$C, evaluated from polarization resistances of 8YSZ electrolyte-supported symmetric cells post-sintered at 1150 $°$C $<T<1250$ $°$C. The cathode and current collector materials are adapted to fit the co-sintering process by adjustment of the paste compositions. Half-cells consisting of silicate mechanical support, LSM current collector, LSM mixed with 8YSZ composite cathode and 8YSZ electrolyte are co-sintered porous and defect-free at 1150 $°$C $<T<1250$ $°$C.