螺旋藻泡载分离法采收的实验室研究

在一种斜臂泡沫分离装置上，较为详细地研究了泡沫塔构造、起泡剂Tween 20浓度、载气流率、pH值和乙醇浓度等因素对螺旋藻泡载采收性能的影响. 结果表明，斜臂泡沫塔可明显改善藻细胞的泡载性能, 当Tween 20浓度为100 mg/L、载气流率为30 L/h及pH=11、乙醇浓度为1%(j)时，泡载采收过程的分离因子R和浓缩倍数a可分别达到5.04~6.52和2.74~4.31.     

电力绝缘用六氟化硫替代物的过去、现在和未来

本文综述了电力绝缘用SF6替代物的开发方法、发展现状和未来趋势。其开发方法包括替代物的设计与确认（物性、安全性评价、环境影响的评价等）、合成、产业化等内容。目前，开发出的SF6替代物包括SF6混合气体、饱和卤代烃、氢氟烯烃、全氟酮和全氟腈，其中七氟异丁腈的绝缘性能优异，是SF6最佳的替代物。同时文中综述了现有七氟异丁腈的合成路线，其中以碳酰氟和六氟丙烯为起始原料催化反应合成七氟异丁腈的路线，具有高效、绿色、环保的优点。以过去发展历程和现在发现现状为基础，展望了SF6替代物的未来发展趋势，提出今后的研究重点在于全面开发七氟异丁腈的应用配套设备，下一代SF6替代物及其绿色、高效的产业化路线。     

选磷厂废水电化学处理循环利用

简要介绍磷矿浮选厂废水（尾矿水）进行电化学处理的研究和处理后循环使用的浮选工艺试验以及含固废水电化学处理的理论基础。试验结果表明：经电化学处理后的废水达到工艺用水水质控制指标；反复循环使用于浮选工艺取得满意效果；电化学处理方法是实现工业废水循环利用的有效手段。     

Carbonization and graphitization

A review is made of recent electron microscope observations relating to the carbonization and graphitization of a variety of carbonaceous precursors. The different behaviors of graphitizing and non-graphitizing carbons are elucidated, and the effect of sulphur as a cross-linker is determined. The resulting processes are shown to apply to a wide variety of materials ranging from cokes to carbon fibers.     

Charge/discharge characteristics of sulfur composite cathode materials in rechargeable lithium batteries

The charge and discharge characteristics of lithium batteries with sulfur composite cathodes have been investigated. The sulfur composites showed novel electrochemical characteristics. The analysis of the differential capacity indicated that the discharge process showed two voltage plateaus of 2.10 V and 1.88 V, and the charge process also presented two voltage plateaus of 2.22 V and 2.36 V. The overcharge test showed that the composite cannot be charged over 4.0 V, the voltage always stopped at about 3.9 V during charging, indicating that the composite presented the intrinsic safety for the overcharge of lithium batteries. The overcharge can cause serious safety problem for the conventional Li-ion batteries. The overcharge test also showed that the batteries with sulfur composite were destroyed when the upper cut-off voltage was over 3.6 V. However, the composite presented good reversible capacity after it was deep discharged even to 0 V. It showed stable cycleability and high cycling capacity of 1000 mAh g⁻¹ when cycling between 0.1 V and 3.0 V, indicative of the different characteristic from the conventional oxide cathode materials. The prototype polymer battery with the composite cathode material presented the energy density of 246 Wh kg⁻¹ and 401 Wh L⁻¹.     

Clustering-driven watershed adaptive segmentation of bubble image

In order to extract froth morphological feature, a bubble image adaptive segmentation method was proposed. Considering the image’s low contrast and weak froth edges, froth image was coarsely segmented by using fuzzy c means (FCM) algorithm. Through the attributes of size and shape pattern spectrum, the optimal morphological structuring element was determined. According to the optimal parameters, some image noises were removed with an improved area opening and closing by reconstruction operation, which consist of image regional markers, and the bubbles were finely separated from each other by watershed transform. The experimental results show that the structural element can be determined adaptively by shape and size pattern spectrum, and the froth image is segmented accurately. Compared with other froth image segmentation method, the proposed method achieves much high accuracy, based on which, the bubble size and shape features are extracted effectively.     

Nanobubble generation and its applications in froth flotation (part Ⅲ): specially designed laboratory scale column flotation of phosphate

Froth flotation is used widely for upgrading raw phosphate. The flotation recovery of coarse phosphate (-1.18+0.425 mm) is much lower than that achieved on the -0.425+0.15 mm size fraction. Enhanced recovery of coarse phosphate particles is of great economic and environmental importance for phosphate industry. In this investigation, four different phosphate samples were aquired, characterized and tested in a specially designed laboratory-scale flotation column. Significant recovery improvement of coarse phosphate flotation was achieved using cavitation-generated nanobubble though its effects differ among the four testing phosphate samples. The laboratory-scale flotation column test results indicate that nanobubble increased P2O5 recovery by up to 10%-30% for a given Acid Insoluble (A.I.) rejection, depending on the characteristic of phosphate samples. The improvement ef-fect of nanobubble on the hard-to-float particles was more significant than that on easy-to-float particles, especially at lower col-lector dosages. Nanobubbles reduced the collector dosage by 1/3 to 1/2. Nanobubbles almost doubled the coarse phosphate flotation rate constant and increased the flotation selectivity index by up to 25%.     

Two-step flotation recovery of iron concentrate from Donganshan carbonaceous iron ore

The flotation of pure and natural carbonaceous iron ore samples in the oleate flotation system was investigated. Starch can depress hematite effectively in a wide pH range, but cannot depress siderite efficiently in neutral conditions. The flotation recovery of pure hematite, siderite, and quartz in the oleate-starch-CaCl₂ system is significantly different when the slurry pH varies from 4 to 12. A novel two-step flotation process was developed for the separation of iron concentrate from Donganshan carbonaceous iron ore through which the siderite concentrate is first recovered and the high quality hematite concentrates with relative high iron recovery can be obtained in the second step flotation. The siderite concentrate may be utilized directly or undergo further concentration steps to increase iron grade.     

Surface chemical study of the selective separation of chalcopyrite and marmatite

FCLS (Ferric Chromium Lignin Sulfonate) was used to aid the separation of chalcopyrite from marmatite. Flotation, adsorption and zeta-potential tests of treated marmatite and chalcopyrite were performed. The flotation of marmatite was strongly depressed, while that of chalcopyrite was only slightly depressed, over a wide range of pH values when FCLS was used as depressant in the presence of Butyl Xanthate (BX). The adsorption of BX onto chalcopyrite or marmatite takes place over a wide pH range. The adsorption density of BX on chalcopyrite and marmatite decreases as the pH increases. The adsorption density of FCLS onto marmatite is greater than the adsorption density onto chalcopyrite. The zeta potentials of chalcopyrite and marmatite become more negative due to the addition of xanthate and FCLS.     

旋流-静态微泡浮选柱净化含油废水试验研究

为了提高含油废水处理效果、简化处理工艺,提出了以旋流一静态微泡浮选柱为核心的水处理工艺,在自行研制的试验装置系统上,研究了循环泵压力、柱体过流速度、混凝剂种类及投加量、表面活性剂投加量、油水pH值等主要工艺参数对模拟含油废水除油效果的影响.结果表明:以上因素均对脱油率有较大影响,在优化条件下,除油率可达95.7%,旋流-静态微泡浮选柱对含油废水有较高的净化能力.