铝合金薄板尖边缘缺口试样的机械加工方法及缺口敏感性测试

介绍高强度铝合金薄板的尖边缘缺口拉伸试样的机械加工方法，用该方法制备的仿美７０７５、美制７０７５、国产ＬＣ４、ＬＣ９、ＬＹ１２、ＬＢ７３３等６种铝合金１６种热处理状态下的ＥＮ试样，其内率半径Ｒ满足了ＡＳＴＭＥ３３８－６８标准方法中Ｒｍａｘ０．０１８毫米的要求，并且达到Ｒ＜０．０１０毫米的特高精度。同时，还对仿美７０７５、美制７０７５、国产ＬＣ４的６种热处理状态下的缺口敏感性和宏观断口、以及选择仿美７０７５、ＬＹ１２对扫描断口形态进行了研究。     

Stress in Thin Films;Diffraction Elastic Constants and Grain Interaction

Untextured bulk polycrystals usually possess macroscopically isotropic elastic properties whereas for most thin films transvers isotropy is expected,owing to the limited dimenionlity .The usually applied models for the calculation of elstic constants of polycrystals from single crystal elastic contants(so-called grain interaction models)erroneously predict macroscopic isotropy for an(untextured) thin film.This paper presents a summary of recent work where it has been demonstrated for the first time by X-ray diffraction analysis of stresses in thin films that elastic grain interaction can lead to macroscopically anisotropic behaviour (shown by non-linear sin^2φ plots).A new grain interaction model,predictin the macroscopically anisotropic behaviour of thin films,is proposed.     

Block Copolymer Surface Reconstuction: A Reversible Route to Nanoporous Films

Thin films of block copolymers have been used as templates and scaffolds for the fabrication of arrays of nanostructured materials. In general, a chemical modification of the film or the removal of one of the components by photodegradative methods is required to produce a nanoporous film that serves as a template or scaffold. Here, however, the preferential interaction of one of the components with a solvent is shown to produce a reconstruction of the block copolymer film that, upon drying, leads to the generation of a nanoporous template. The area density of the pores is identical to that of the original copolymer thin film. Since no chemical reactions occurr, the process is fully reversible. Upon heating the copolymer film above its glass‐transition temperature, mobility is imparted to the copolymer and the original copolymer film with oriented domains is recovered. The film reconstruction significantly simplifies the generation of nanoporous templates.     

High temperature transport kinetics in heteroepitaxial LaFeO3 thin films

Heteroepitaxial LaFeO₃(1 1 0) thin films with a thickness of 150 nm were grown on LaAlO₃(0 0 1) by reactive sputtering in an inverted cylindrical magnetron geometry. Equilibrium conductivity was measured as a function of partial pressure of oxygen at T=1000 °C, and logσ plotted vs. logP(O₂) showed a minimum in conductivity for P(O₂)=10⁻¹¹ atm and a linear response between 10⁻¹⁰ and 1 atm. This linear response makes thin films of LaFeO₃ a promising material for oxygen sensor applications. We have also measured the time response of the film conductivity upon an abrupt change in the partial pressure of ambient oxygen from 10⁻² to 10⁻³ atm, which was determined at 60 s for T=700 °C and <3.5 s at T=1000 °C.     

Cover Picture: Toward Large‐Scale Alignment of Electrohydrodynamic Patterning of Thin Polymer Films (Adv. Funct. Mater. 15/2006)

By integrating lithography and self‐assembly via electrohydrodynamic instabilities, Russel and co‐workers are able to guide initially flat polymer films to evolve into periodic arrays of pillars over regions much greater in extent than their natural domain sizes, as detailed on p. 1992. Novel structures that involve a combination of linear ridges and pillars are also produced, mainly as as result of the dynamic merging among preformed pillars. To pattern thin polymer films via electrohydrodynamic instabilities, we design and utilize two different kinds of mask patterns to guide pillars into alignment over regions much greater in extent than their natural domain sizes. First, narrow protruding ridges that intersect to form regular patterns on the mask trigger the growth of pillars beneath. Later, square and triangular packings of pillars develop in the regions enclosed by those ridges, preserving the registry from one domain to the next over a much larger area than within individual domains in unpatterned portions of the mask. Second, small square protrusions that are prealigned into a large regular array on the mask guide the formation of square packings of pillars in domains that conform to the mask, forming a large array of pillars. Novel structures involving a combination of linear ridges and pillars are also produced mainly due to the dynamic merging among preformed pillars. Finally, we find vertex symmetry of the mask pattern is necessary for generating and preserving ordered patterns on the polymer film.     

双辊式薄带连铸工艺研究

进行了双辊法薄带连铸的试验研究。阐述了双辊连铸机浇注系统的研究结果、工艺参数对连铸的影响，以及18—8不锈钢薄带坯的凝固组织和冷轧特性，该工作为薄带连铸的中间生产机组的研究奠定了基础。     

The initial behaviour of freshly etched copper in moderately acid, aerated chloride solutions

When freshly etched samples of various types of copper were exposed in moderately acid, aerated chloride solutions, two phenomena were observed. First the corrosion potential and the pH of the solution decreased over a shorter time, then the potential increased over a long period (600-1500 min), following an s-shaped pattern. Increase in pH during the second stage was avoided using a pH-stat. The corrosion rate increased little or not at all over the entire period. A tentative interpretation of the short-term behaviour is presented with some reservation. The long-term development of the potential suggests phase formation or transformation following the Avrami pattern. By suitable derivations it was possible to fit the development of potentials to the Avrami equation. Subsequent examinations by Auger spectroscopy proved the presence of thin layers of Cu₂O on the copper surfaces, increasing in thickness with exposure time. The dissolution kinetics can be described in terms of two parallel electrochemical reactions and a simultaneous non-electrochemical dissolution reaction.     

Delamination of thin film strips

Delamination of residually stressed thin film strips is analyzed to expose the dependence on strip width and film/substrate elastic mismatch. Isotropic films and substrates are assumed. The residual stress in the film is tensile and assumed to originate from mismatch due to thermal expansion or epitaxial deposition. Full and partial delamination modes are explored. In full delamination, the interface crack extends across the entire width of the strip and releases all the elastic energy stored in the strip as the crack propagates along the interface. The energy release rate available to propagate the interface crack is a strong function of the strip width and the elastic modulus of the film relative to that of the substrate. The energy release rate associated with full delamination is determined as a function of the interface crack length from initiation to steady-state, revealing a progression of behavior depending in an essential way on the three dimensionality of the strip. The dependence of the energy release rate on the remaining ligament as the interface crack converges with the strip end has also been calculated, and the results provide an effective means for inferring interface toughness from crack arrest position. A partial delamination propagates along the strip leaving a narrow width of strip attached to the substrate. In this case, the entire elastic energy stored in the strip is not released because the strain component parallel to the strip is not relaxed. A special application is also considered, in which a residually stressed metal superlayer is deposited onto a polymer strip. The energy release rate for an interface crack propagating along the interface between the polymer and the substrate is determined in closed form.