A new approach for the voxelization of volumetric CSG graphs

This paper presents a new approach for the voxelization of volumetric scene graphs. The algorithm generates slices of each primitive intended to be voxelized using an FPGA based pixel processor. The Blist representation is used for the volume scene tree which reduces storage requirement for each voxel to the log(H+1) bits. The most important advantage of this voxelization algorithm is that any volume scene tree expression can be evaluated without using any computation or stack. Also the algorithm is not object specific, i.e. the same algorithm can be used for the voxelization of different types of objects (convex and concave objects, polygons, lines and surfaces).     

Constructive sculpting of heterogeneous volumetric objects using trivariate B-splines

This paper deals with modeling heterogeneous volumetric objects as point sets with attributes using trivariate B-splines. In contrast to homogeneous volumes with uniform distribution of material and other properties, a heterogeneous volumetric object has a number of variable attributes assigned at each point. An attribute is a mathematical model of an object property of an arbitrary nature (material, photometric, physical, statistical, etc.). In our approach, the function representation (FRep) is used as the basic model for both object geometry and attributes represented independently using real-valued scalar functions of point coordinates. While FRep directly defines object geometry, for an attribute it specifies a space partition used to define the attribute function. We propose a volume sculpting scheme with multiresolution capability based on trivariate B-spline functions to define both object geometry and its attributes. A new trivariate B-spline primitive is proposed that can be used as a leaf in an FRep constructive tree. An interactive volume modeler based on trivariate B-splines and other simple primitives is described, with a real-time repolygonization of the surface during modeling. We illustrate that the space partition obtained in the modeling process can be applied to define attributes for the objects with an arbitrary geometry model such as BRep or homogeneous volume models.     

Transient Fluid Flow in a Continuous Casting Tundish during Ladle Change and Steady‐state Casting

Transient effects occur during both steady‐state casting as well as transient casting, e.g. a ladle change. These effects are caused by transient boundary conditions at the inlet of the tundish. A time‐dependent inlet temperature causes a free convection flow during steady‐state casting. During transient casting, such as during a ladle change, the mass flow at the inlet is time‐dependent and thus a transient flow develops. In general, transient flow is unwanted because transient flow means a change of conditions for the separation of non‐metallic particles. The analysis of the flow in the tundish is carried out by numerical as well as physical simulations. In this case experimental investigations are carried out on a water model. The results of laser optical investigations using Laser Doppler Anemometry (LDA) and Particle Image Velocimetry (DPIV) serve as a validation of the numerical results. The numerical results are then used for the investigation of the thermal melt flow. The effects caused by a changing bath level during transient casting (ladle change) are investigated using the Volume‐of‐Fluid (VoF) model. Beyond this, the interaction between the melt and slag is taken into account, by using the three phase system melt‐slag‐air. In addition to the classical methods a new zonal approach is introduced in this paper. The integral balance localises high turbulence mixing regions as well as the development and intensity of back flows. The levelling of the momentum flux between the inlet and the outlet can also be described.     

Improved perspective visibility ordering for object-order volume rendering

Finding a correct a priori back-to-front (BTF) visibility ordering for the perspective projection of the voxels of a rectangular volume poses interesting problems. The BTF ordering presented by Frieder et al. [6] and the permuted BTF presented by Westover [14] are correct for parallel projection but not for perspective projection [12]. Swan presented a constructive proof for the correctness of the perspective BTF (PBTF) ordering [12]. This was a significant improvement on the existing orderings. However, his proof assumes that voxel projections are not larger than a pixel, i.e. voxel projections do not overlap in screen space. Very often the voxel projections do overlap, e.g. with splatting algorithms. In these cases, the PBTF ordering results in highly visible and characteristic rendering artefacts. In this paper we analyse the PBTF and show why it yields these rendering artefacts. We then present an improved visibility ordering that remedies the artefacts. Our new ordering is as good as the PBTF, but it is also valid for cases where voxel projections are larger than a single pixel, i.e. when voxel projections overlap in screen space. We demonstrate why and how our ordering works at fundamental and implementation levels.     

流域网格中嵌入式复杂声源的时域传播仿真

针对声学商业软件较难模拟任意形状、时变复杂声源的声辐射问题,使用有限体积法在时域内求解无声源项亥姆霍兹(Helmholtz)方程,将复杂声源嵌入到有限体积单元节点,推导了由给定声源表面声压或振动位移得到速度势公式,提高了声源处理的灵活性和计算效率。该方法允许对初始场问题及复杂时变声源声辐射进行仿真。对常见声源及二阶圆柱体声源声辐射进行了数值模拟,结果与解析解及商业软件结果进行了对比,误差均小于15%。程序具有良好的封装性及通用性,可以灵活地对不同声源进行组合,得出任意复杂声源时域的传播规律,为复杂声源声辐射等线性声学问题的研究提供了一个可靠的平台。     

Optical recording characteristics of molybdenum oxide films prepared by pulsed laser deposition method

Molybdenum-oxide (MoO₃)films were deposited on glass substrates (Corning #7059 with an area of 26 × 38 mm²) by pulsed laser deposition using an ArF excimer laser. It was found that after annealing at 340 °C for 10 min, the film thickness became 2.3 times that (approximately 30 nm) of the as-deposited film thickness. The difference in the transmittance, ΔT, between the annealed state and the as-deposited state was about 40% at a wavelength of 400 nm. X-ray diffraction spectra indicated that oxygen was absorbed into the MoO₃ films through the annealing process. From revolution testing of 30 nm-thick MoO₃ films without a protective layer deposited on a polycarbonate DVD-R disk substrate (120 mm?, 0.6 mm thickness), a write peak-power dependence of carrier-to-noise ratio (CNR) (recording on-land, at λ = 406 nm, NA = 0.65) of the 3T signal (58.5 MHz) was measured at a linear velocity of 5 m/s and a read power of 0.6 mW. Consequently, CNR near 50dB was obtained in the wide write-power margin ΔP of 7 mW (at peak powers between 3.5 and 10.5 mW). From SEM observations, it was recognized that bits of 0.25-0.30 μm size, corresponding to a storage capacity of 7-10GB/in² in the case of NA = 0.65, were formed. For the sample structure with an Al₂O₃ protective layer of ~ 20 nm thickness, a CNR near 50dB was obtained in the peak-power margin ΔP of 12 mW (at peak powers between 6.0 and 18.0 mW). Larger values of the CNR can be obtained if the film thickness of each layer including both the active and protective layers is optimized.     

Evaluating the Effectiveness of Best Management Practices Using Dynamic Modeling

Structural best management practices (BMPs) have become a tool for stormwater managers to achieve water quality improvement and regulatory compliance. Existing empirical evaluation of BMP performance is valuable, but has limited applicability to predict BMP performance over extended durations under a variety of storm types. This study applies a dynamic model to simulate BMP performance over a 10-year period. The BMP model used hourly output from a calibrated and validated land-use model to evaluate two BMP types: a retention facility and a flow-through swale. The model evaluated each BMP alone and in series targeting volume, total suspend solids, and total copper. Effectiveness was based on load reduction, event mean concentrations, and frequency of exceedence of relevant water quality standards. The model predicted over 60% removal of solids and copper over most conditions; however, effectiveness was reduced during large storms and wet years. Although performance was similar based on load reduction and water quality standard exceedence, the latter was most sensitive to storm size. This study demonstrates that BMP modeling can help managers understand expected BMP performance over a range of storms, time periods, and design parameters, and, perhaps more significantly, evaluate BMPs in series.     

Shear Strength and Shear-Induced Volume Change Behavior of Unsaturated Soils from a Triaxial Test Program

A series of unsaturated soil triaxial tests were performed on four soils including sand, silt, and a low plasticity clay. Attempts were made to correlate unsaturated soil properties from these tests and data from the literature with soil-water characteristics curve (SWCC), soil gradation, and saturated soil properties. The feasibility of estimating unsaturated soil property functions from saturated soil properties, SWCCs and gradation data, is demonstrated. A hyperbolic model for estimation of the unsaturated soil parameter, ?b, versus matric suction is presented. Shear induced volume change behavior was also studied, and results are included in this paper. Although not correlated with soil index properties, these shear-induced volume change data are important to complete stress-deformation analyses, and represent a significant addition to the existing data base of unsaturated soil properties.     

3D Monte Carlo simulation of current trends and performance in scaled trigate MOSFET

Silicon nanowires with multiple-gates provide better source drain isolation and are thought to be the most promising candidate to replace bulk Si MOSFETs as we downscale deep into the nanometer regime. In this study we utilize a 3D full-band particle Monte Carlo (MOCA3D) simulator to investigate the performance and current trends of fully-depleted Trigate MOSFETs with different cross-sections. Results indicate that as we reduce the cross-section, the increased coupling between the top and lateral gates reduces the channel potential in different axes. In addition, device current normalized with respect to the Trigate perimeter alleviates as we scale the cross-section.