无线通信基站建设中电磁辐射缓解技术应用实践

无线通信基站电磁辐射缓解技术包括增加发射天线架设高度、增加天线增益、降低发射器功率、减小VRP下倾角度和改变垂直辐射图VRP等。结合案例分析了无线通信基站建设过程中电磁辐射缓解技术的应用实践。     

On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

The locomotive assignment problem: a survey on optimization models

The objective of the locomotive assignment problem (LAP) is to assign a fleet of locomotives to a set of trains while satisfying a rich set of operational and budget constraints and optimizing one or more crucial objectives. This paper presents a survey on optimization models for this class of scheduling problems. Depending on the context of application, the kind of model used to solve the LAP varies; accordingly, this influences the solution methodology and algorithms used. In this paper, we review and also suggest a classification of the various models.     

工业控制系统中可靠性设计的研究

本文主要阐述了在工业生产控制系统中,可靠性设计中的热设计、电磁防护设计、机械防震设计,提出了可靠性设计中应当注意的问题,以及一些解决问题的方案和办法.热设计中应当主要注意温度,电磁防护设计中应当主要注意屏蔽和接地,机械防震设计中应当主要注意防震.     

勘察设计企业信息系统安全体系建设

随着信息化程度的提高,勘察设计企业对网络和信息技术的应用程度越来越深入,越来越多的数据、流程、知识成果以电子文档的形式储存于各类信息系统中.依据网络安全理论体系和技术,结合某勘察设计企业实际,以管理为基础,以技术为手段,探讨建立实用的勘察设计企业信息系统安全体系.     

A literature survey and an experimental study of coal devolatilization at mild and severe conditions: influences of heating rate, temperature, and reactor type on products yield and composition

Coal devolatilization studies to maximize the yield of condensable products by operating at elevated temperatures and heating rates have been published. The objectives of this study were to investigate the influences of relatively mild operating conditions (e.g. relatively low temperature and pressure) on product quality, by comparing devolatilized products obtained at various temperatures and heating rates. Fixed bed, fluid bed, and entrained flow reactor units were used to obtain pyrolysis products. In addition, literature data on tar yields in various reactor units at a range of temperatures and residence times were surveyed and compared with experimental data. The liquids were characterized by a number of techniques, including field ionization mass spectroscopy (f.i.m.s.), sequential elution solvent chromatography (s.e.s.c.) and elemental analysis. The results demonstrate that the quality and yield of liquids obtained at a rapid heating rate are functions of peak pyrolysis temperature. It was shown that at a rapid heating rate, the yields of heavier polyfunctional groups (i.e. hydrocarbons with greater mean molecular weight) are greater than those obtained in the fixed bed slow heating rate reactor. The liquids generated at a slow heating rate are of lower molecular weight, viscosity, and sulphur content, and of higher H/C atomic ratios compared with the liquids obtained in a rapid heating rate unit. The effect of increasing the maximum pyrolysis temperature (at a constant slow heating rate) was to increase the yield of light gases (mainly H) at the expense of char hydrogen content and char reactivity. The tar yield is not markedly influenced when the peak devolatilization temperature is increased at a relatively slow heating rate. However, the quality (as defined by the H/C (atomic) ratio) of the liquids, and the reactivity (in air) of char, was reduced when the peak pyrolysis temperature was increased. At a rapid heating rate, the primary products, which have many structural characteristics of the parent coal, are devolatilized. The quality of the liquids obtained at a rapid heating rate is, therefore, determined by the devolatilized primary coal fragments evolved at the devolatilization temperature. In a slow heating rate fixed bed unit, however, the primary coal fragments undergo additional cracking reactions which involve stabilization of free radicals by donatable hydrogen. This leads to the formation of low molecular weight hydrocarbons of relatively higher quality. In-situ (both intraparticle or extraparticle) stabilization of reactive coal fragments by donatable hydrogen may lead to a significant improvement in the overall quality of the pyrolysis liquids in a fixed bed system in which time-temperature history is conducive for such reactions.     

Dynamic Compressibility of Carbamide at Low Pressures

The shock adiabats of pressed carbamide samples with a density of 1.29 g/cm³ and carbamide samples with a bulk density of 0.78 g/cm³ were studied at pressures of 1–14 GPa using an electromagnetic method. In the coordinates D and U, the shock adiabat of pressed carbamide is linear and the shock adiabat of carbamide of bulk density at a pressure of 2.4 GPa is represented as two linear segments: D = 2U at 0.6 < U <1.3 km/sec and D = 0.6 + 1.55U at 1.3 <U < 2.8 km/sec. The possibility of a phase transition in carbamide under shock compression is discussed.     

基于抽样调查的高职教师科研素质现状实证分析

以部分高职院校教师的问卷调查的数据结果为依据,分析目前高职教师的科研素质问题。调查分析结果表明,高职教师科研兴趣整体上偏低,科研成果质量和档次不高,不少教师对科研方法掌握不够,科研处理问题的方式欠妥。因此,高职教师要增强科研意识,改进科研方法,加强学习培训,提升科研素质和水平。     

引水隧洞复杂地质段地质超前预报综合评价

由于单一地质超前预报方法对复杂地质段预报的局限性,本文则主要通过地质编录法、瞬变电磁法、水平声波反射法三种方法的综合分析,避开各种方法局限性的影响,完成对复杂地质段的超前预报,同时成功预报一个次生断层以及该断层影响带宽度,并给施工提供合理建议,使得施工顺利进行。预报结果与实际开挖地质情况基本一致,取得了显著效果。因此,在面对复杂地质段时,应用地质编录法、瞬变电磁法、水平声波反射法综合评价地质情况,获取准确、可靠的地质超前预报结果,是一种高效、可行的组合方法之一。     

复杂电磁暂态下变压器差动保护异常动作行为分析及对策

随着电力系统结构与组成的复杂性增加,变压器差动保护发生原因不明的误、拒动作几率明显上升,给电网安全带来隐患,也影响工业生产的正常运行.分析变压器经历外部故障切除、有载合闸、非线性负荷投入、换流变合闸等复杂电磁暂态过程时基于二次谐波制动的差动保护误动的机理,指出TA局部暂态饱和、非线性特性元件的相互作用是造成上述保护误动的根本原因.并对换流变压器差动保护在故障情况下长延时动作的原因进行分析,基于相电压突变量和差流突变量的时差,提出一种能有效解决上述问题的变压器差动保护判据。在任何非故障的异常情况下,该时差总是存在,而内部故障时该时差很小,可以将变压器故障和其经历的异常运行状态相区分.通过大量的试验对该判据的可行性和有效性进行验证.