Decentralized control: Status and outlook

This paper reviews state of the art in the area of decentralized networked control systems with an emphasis on event-triggered approach. The models or agents with the dynamics of linear continuous-time time-invariant state-space systems are considered. They serve for the framework for network phenomena within two basic structures. The I/O-oriented systems as well as the interaction-oriented systems with disjoint subsystems are distinguished. The focus is laid on the presentation of recent decentralized control design and co-design methods which offer effective tools to overcome specific difficulties caused mainly by network imperfections. Such side-effects include communication constraints, variable sampling, time-varying transmission delays, packet dropouts, and quantizations. Decentralized time-triggered methods are briefly discussed. The review is deals mainly with decentralized event-triggered methods. Particularly, the stabilizing controller–observer event-based controller design as well as the decentralized state controller co-design are presented within the I/O-oriented structures of large scale complex systems. The sampling instants depend in this case only on a local information offered by the local feedback loops. Minimum sampling time conditions are discussed. Special attention is focused on interaction-oriented system architecture. Model-based approach combined with event-based state feedback controller design is presented, where the event thresholds are fully decentralized. Finally, several selected open decentralized control problems are briefly offered as recent research challenges.     

基于AJAX技术创建的异步方法应用研究

遵循AJAX技术的基本原理,创建了一个简单的异步引用方法,并给出登录实例来说明如何实现该方法的引用,减少代码冗余。主要阐述了通过创建方法,并引用方法到不同Web应用程序中,实现了代码的优化。     

基于LS-SVM逆系统的无轴承异步电机解耦控制

无轴承异步电机具有非线性、多变量和强耦合的特点,要实现电机稳定悬浮和旋转运行,必须对其进行非线性动态解耦控制。为了克服逆系统方法精确建模难的局限性,采用基于最小二乘支持向量机(LS-SVM)α阶逆系统方法对无轴承异步电机进行动态解耦控制的研究。首先利用最小二乘支持向量机辨识出无轴承异步电机的逆模型,然后将它串联在原系统前,将无轴承异步电机解耦成四个独立的伪线性子系统-2个径向位移子系统、一个速度子系统和一个磁链子系统。为保证鲁棒性能,最后对解耦后的系统采用非线性内模控制策略。研究表明,LS-SVMα阶逆系统方法能够实现无轴承异步电机径向悬浮力和旋转力之间的动态解耦控制,控制系统具有良好的静态和动态性能。     

基于Matlab闭环直流调速系统的分析与仿真

论文通过对单闭环直流调速系统的介绍,阐述和分析了自动控制系统的一般步骤与方法,并给予解决采用常规比例调节器为电压放大和电压比较环节时存在的问题的控制方案,同时通过软件MATLAB进行了实验验证,结果表明控制方案可行,效果良好.     

基于硬件滤波电路的无刷直流电机转子位置辨识

反电动势过零检测是无刷直流电机无位置传感器控制中转子位置检测的主要方法之一,为消除PWM因素的影响,需要对转子位置检测电路进行滤波处理。本文采用硬件滤波器对反电动势过零检测电路进行滤波,既要考虑深度滤波带来的相移问题又要兼顾消除噪声的影响,分析滤波器的幅频特性和相频特性,根据反电动势过零检测指标要求设计滤波器参数,并用于无刷直流电机转子位置辨识和无位置传感器控制中。仿真结果和实验结果表明,所采用的滤波器及其参数能较好地检测出转子位置,可以明显提高无位置传感器无刷直流电机驱动系统的控制性能。     

一种基于TL494芯片的电动车电机控制器

他励直流电动机驱动系统结构简单、性能可靠、成本低,适合在小型电动车上运行,有效的降低了电动汽车的价格,有利于电动汽车的普及。本文在分析电动车用他励直流电机工作原理的基础上,论述电机驱动系统的整体方案,并设计3KW/36V他励有刷直流电机控制器。该控制器主要通过TL494控制,包括36V铅酸蓄电池欠压保护,控制器的过热保护等功能。经实验证实该控制器达到设计指标,工作稳定可靠,满足电动车的各种运行情况,保护功能完善并具有能量回馈等功能。     

Asynchronous fault detection filter design approach for discrete‐time switched linear systems

This paper is concerned with the problem of the fault detection filter design for discrete‐time switched linear systems with average dwell‐time. The designed fault detection filters are also switched systems, which are assumed to be asynchronously switched with the original switched systems. Improved results on the weighted l₂ performance and the H _? performance are first given, and the multiple Lyaounov‐like functions during matched period and unmatched period for the running time of one subsystem are used. By the aid of multiple Lyapunov‐like functions combined with Projection Lemma, the FD filters are designed such that the augmented systems under asynchronous switching are exponentially stable, and the residual signal generated by the filters achieves the weighted l₂‐gain for disturbances and guarantees the H _? performance for faults. Sufficient conditions are formulated by linear matrix inequalities, and the filter gains are characterized in terms of the solution of a convex optimization problem. Finally, examples are provided to demonstrate the effectiveness of the proposed design method. Copyright © 2012 John Wiley & Sons, Ltd.     

基于Pro/TOOLKIT异步模式特征识别方法

对Pro／Engineer（Pro／E）二次开发工具Pro／TOOLKIT（PTC公司为Pro／E软件提供的二次开发工具包）的异步模式进行了研究，充分利用参数化技术，开发了实体模型的特征识别系统。系统可以控制Pro／E的自动启动及关闭，使其在后台运行。通过模型的调用实现实体特征的快速识别提取，为模具估价系统的智能化设计做好了准备。     

Dynamic equivalent method of interconnected power systems with consideration of motor loads

The existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors.This paper presents a dynamic equivalent method which considers motor dynamics.At first,the clustering criterion of motor loads is given.The motors with similar dynamic characteristics are classified into one group.Then,reduction of motors in the same group is carried out.Finally,parameters of the equivalent motor are calculated and the equivalent system is thus...     

省级机动车排气检测监管系统应用研究

为解决当前我国省级环保部门对机动车排气检测监管的实际困难,提高机动车排气污染监管能力,介绍了省级机动车排气检测监管信息系统的构建方法,提出了系统的整体技术框架、网络架构和功能模块组成,并阐述了基于Web services的省—市数据交换技术和自定义统计报表技术的实现方法。以广东省为例开发了原型系统,试运行结果初步显示了系统的实际运行能力。该系统方案能有效解决当前省级环保部门机动车监管所面临的实际问题。