Computation of Bearing Capacity Factor Nγ?Terzaghi’s Mechanism

A procedure based on K?tter’s equation is developed for the evaluation of bearing capacity factor Nγ with Terzaghi’s mechanism. Application of K?tter’s equation makes the analysis statically determinate, in which the unique failure surface is identified using force equilibrium conditions. The computed Nγ values are found to be higher than Terzaghi’s value in the range 0.25–20%, with a diverging trend for higher values of angle of soil internal friction. A fairly good agreement is observed with other solutions which are based on finite difference coupled with associated flow rule, limit analysis, and limit equilibrium. Finally, the comparison with available experimental results vis-à-vis other solutions shows that, computed Nγ values are capable of making a reasonably good prediction.     

Pareto multi-criteria decision making

The paper concerns design governed by multiple objective criteria, which are conflicting in the sense of competing for common resources to achieve variously different performance objectives (financial, functional, environmental, esthetical, etc.). A multi-criteria decision making (MCDM) strategy is proposed that employs a tradeoff-analysis technique to identify compromise designs for which the competing criteria are mutually satisfied in a Pareto-optimal sense. The MCDM strategy is initially developed for the case of design governed by n = 2 objective criteria. It is then extended to design governed by n > 2 objective criteria, by introducing the concept of primary and aggregate criteria. It is proved that, from among the theoretically infinite number of feasible designs forming the Pareto front for a design problem governed by n independent objective criteria, there exists a unique Pareto-compromise design that represents a mutually agreeable tradeoff between all n criteria. This remarkable result is illustrated for a flexural plate design governed by n = 2 criteria, a bridge maintenance-intervention protocol design governed by n = 3 criteria, and a media centre envelop design governed by n = 11 criteria.     

Green Tax Reforms and Computational Economics A Do-it-yourself Approach

The double or even triple dividend hypothesis of green tax reforms has beena major issue of dispute in both the scientific community and the politicalarena during the last decade. Theoretical analysis has provided a number ofimportant qualitative insights to the debate but lacks of actual policyrelevance due to very restrictive assumptions. Applied research that takes thestep from stylized analytical to complex numerical models usually comes as ablackbox to non-expert modelers. This paper aims at bridging the gap betweenstylized theoretical work and numerical analysis. We develop a flexible,interactive simulation model which is accessible underhttp://brw.zew.de. Users can specify their own green tax reforms andevaluate the induced economic and environmental effects. Based on illustrativesimulations, we demonstrate the usefulness of our do-it-yourself approach fora better understanding of the double (triple) dividend hypothesis.     

折线滑面滑体的稳定分析方法的改进

本文根据刚体极限平衡分析原理，考虑各块体的力矩平衡和块间的嵌合作用，假定作用于块体的已知外力所产生的应力呈线性分布，推导出确定其作用力数值、方向和作用点，以及整体抗滑稳定安全系数的方法和公式。并通过实用研究了嵌合作用、分界面倾角等对反力分布和安全系数的影响，与常用方法的计算结果作了比较，说明本方法有较大的适用性，可应用于工程设计。     

正庚烷-甲苯-三甘醇三元体系液-液相平衡数据的测定与关联

利用气相色谱法测定了常压下２５℃、４０℃和５０℃时正庚烷－甲苯－三甘醇体系的液－液相平衡数据，采用峰面积归一化法定量，所得数据准确、可靠。用ＮＲＴＬ模型对所测数据进行了热力学关联，求出了相应的模型参数。用该模型对本三元体系进行了预测，结果令人满意。     

Basic concept and decentralized autonomous control of super‐distributed energy systems

New small‐scale dispersed generation systems, such as fuel cells and micro gas turbines, have made remarkable advances lately and they will be applied practically in the near future. Although a large number of researches on the introduction of small‐scale dispersed generation systems have been carried out, only a small number of small‐scale dispersed generation systems are considered in these researches. Therefore, little is known about problems to be solved when a large number of small‐scale dispersed generation systems are introduced into electric power systems. This paper deals with a super‐distributed energy system that consists of a great number of dispersed generation systems such as fuel cells, micro gas turbines, and so on. The behavior of a customer with a dispersed generation system is simulated as the Ising model in statistical mechanics. The necessity of a distribution network in super‐distributed energy systems is discussed based on the Ising model. The feasibility of decentralized autonomous control using vicinity information is also investigated on the basis of stability analysis of the Hopfield neural network model. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 151(1): 43–55, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10368     

Optimal Control of Solar Sludge Dryers

Optimal control (OC) methodology is used to develop a control policy for a batch-operated solar sludge dryer with ventilation as the dominant control. Batch performance criteria and instantaneous optimization criteria are developed for two economic environments: quota limited and capital limited. The general formulation, as well as simplifications resulting from the multiplicative form of the evaporation (drying) rate model, are presented. The multiplicative form results in a single constant number, called here “control intensity,” which is used to guide the on-line control decisions. These decisions turn out to be independent of the dry solids content (DSC) of the sludge. Further simplification, by assuming a strictly constant weather, is used to demonstrate the general effects of the economic and physical (weather) environment on the solution.

The OC approach is used to address, via simulation under realistic weather conditions, several design, operation, and pricing problems. In particular, the following have been considered: sizing of the ventilation fans, determination of a fair fee for sludge disposal, finding the best final DSC, and evaluating the effect of the price of electricity. Regarding the particular location represented by the data, it has been shown that the installed capacity of the ventilation fans should be increased and that there seems to be sufficient economic incentive for solar drying.     

基于地面先验的3D目标检测算法

为了提高自动驾驶汽车环境感知的性能,增强单目相机对障碍物三维和边界信息的感知能力,提出了一种基于地面先验的3D目标检测算法。基于优化的中心网络(CenterNet)模型,以DLA(deep layer aggregation)为主干网络,增加目标3D边沿框中心点冗余信息预测。根据自动驾驶场景的地面先验信息,结合针孔相机模型,获取目标3D中心深度信息,以优化深度网络学习效果。使用KITTI 3D数据集评测算法性能,结果表明:在保证2D目标检测准确性的基础上,该算法运行帧率约20 fps,满足自动驾驶感知实时性要求;同时相比于CenterNet模型,在平均方位角得分(average orientation score)和鸟视图平均准确率(bird eye view AP)上分别有4.4和4.4%的性能提升。因而,该算法可以提高自动驾驶汽车对障碍物三维和边界信息的感知能力。     

Heuristic collision-free path planning for an autonomous platform

In this paper, a heuristic and learning, algorithmic scheme for collision-free navigation is presented. This scheme determines an optimum collision-free navigation path of an autonomous platform by using a trial and error process, past navigation knowledge and current information extracted from the generated surrounding environment.     

Solid-liquid phase equilibria of benzene + 2-methyl-2-propanol system under high pressures

Solid-liquid phase equilibria of the benzene + 2-methyl-2-propanol system have been investigated at temperatures from 278 to 323 K and pressures up to 300 MPa using a high-pressure optical vessel. The uncertainties of the measurements of temperature, pressure and composition are within ±0.1 K, ±0.5 MPa, and ±0.001 mole fraction, respectively. The freezing pressure at a constant composition increases monotonously with pressure. The eutectic point shifts to a higher temperature and benzene-rich composition with increasing pressure. In order to describe the pressure-temperature-composition relation of high-pressure solid-liquid phase equilibria, a new simple equation has been proposed as follows: