复合材料边界元素法研究

边界元法是一种迅速发展的数值解法.本文研究了在复合材料层合板中运用平面二次边界元法的有关问题.首先,讨论了将层合板等效为一般正交各向异性单层板的方法;其次,给出了偏轴情况下的基本解,研究了直线型二次边界元偏轴影响系数的解析计算以及域内应力表达式;最后对算例进行了计算,所得结果与相应的解析解和有限元相符甚好.     

X-射线荧光增量法测定硅铁合金中的Ca、Ba

介绍了X-射线荧光增量法同时测定硅铁合金中的Ca、Ba，探讨了基体效应校正、扩展曲线的应用范围，方法准确度和精度高。     

体外CFRP筋预应力混凝土箱梁长期受力性能试验研究

碳纤维(CFRP)筋具有优异的物理力学性能,可用于替代传统的预应力钢筋。制作了体外配置碳纤维筋预应力混凝土箱梁模型,对持续均布荷载作用箱梁的截面应力重分布、长期挠曲变形及裂缝发展等规律进行了1001 d的试验观测。基于素混凝土柱体的实测徐变系数,运用双线性法和曲率法分别对试验箱梁的长期挠曲变形进行预测。试验结果表明:受压钢筋应变较初值增长225%～268%,受拉钢筋的应变较初值增长36.2～38.6%,混凝土表面压应变较初值增长164%～224%。按现行设计规范计算长期荷载作用特征裂缝宽度较实测值偏小11.8%～55.5%。跨中长期挠曲变形实测值为初始变形的2.32～2.42倍,较现行设计规范取值偏大18.5%。     

噻二唑二聚物/丁氧基三乙二醇复合物的合成

合成了噻二唑二聚物/丁氧基三乙二醇复合物。反应物的摩尔比及反应温度影响产物作为添加剂加入到润滑脂中的抗烧结性能。在最佳反应条件下,即n(噻二唑二聚物)∶n(丁氧基三乙二醇)=0.5∶1.0,反应温度125℃时,产率为85%。通过分子模拟、红外光谱、13C核磁共振及N、S元素的含量测定,探讨了产物的结构及反应机理。结果表明,噻二唑二聚物与丁氧基三乙二醇的摩尔比越大,在金属表面形成配位的噻二唑环的个数就越多,就会表现出更强的吸附特性,从而表现出更高的抗烧结性能。     

阳极炉重油供油机组的改造实践

着重介绍了改造前重油供油机组的工艺流程,并针对所存在的问题进行了分析、改进。     

K202A压缩机电机轴瓦超温的原因及对策

K202A压缩机的电机轴瓦采用的是动压轴承,经常持续升温。其主要原因是由于滑动轴承和轴之间是半液体摩擦,润滑油在轴颈及轴瓦之间没有形成具有足够压力的油膜,造成滑动轴承和轴局部形成半液体摩擦而产生大量的热量,又无法被带走引起的。文章通过验算K202压缩机电机滑动轴承温度,分析影响滑动轴承运行温度的因素,提出在原滑动轴承上开油楔及加装一台齿轮油泵为滑动轴承强制润滑,并且通过联轴器把电机和压缩机连接起来,用压缩机轴瓦托起电机轴,使电机轴颈和轴瓦之间处于液体摩擦状态,可有效地降低滑动轴承的运行温度。     

The impact of relative radiometric calibration on the accuracy of kNN-predictions of forest attributes

The k-nearest-neighbour (kNN) algorithm is widely applied for the estimation of forest attributes using remote sensing data. It requires a large amount of reference data to achieve satisfactory results. Usually, the number of available reference plots for the kNN-prediction is limited by the size of the area covered by a terrestrial reference inventory and remotely sensed imagery collected from one overflight. The applicability of kNN could be enhanced if adjacent images of different acquisition dates could be used in the same estimation procedure. Relative radiometric calibration is a prerequisite for this. This study focuses on two empirical calibration methods. They are tested on adjacent LANDSAT TM scenes in Austria. The first, quite conventional one is based on radiometric control points in the overlap area of two images and on the determination of transformation parameters by linear regression. The other, recently developed method exploits the kNN-cross-validation procedure. Performance and applicability of both methods as well as the impact of phenology are discussed.     

Advances in titanium metal injection molding

The approaches to production of titanium powder injection molded parts are reviewed. Historically, oxygen levels have been too high for structural use (particularly with the Ti-6Al-4V alloy). However, recent advances in starting powders, binders and sintering facilities now allow oxygen levels in the Ti-6Al-4V alloy to be controlled to about 0.2 wt.% oxygen. This should result in significant expansion of the titanium PIM market place into aerospace, automobiles, surgical instruments, dentistry, communication devices (such as computers and cell phones), knives and guns. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 5–6 (455), pp. 118–125, 2007.