辽河油田欧52井火山岩油层三元酸压裂酸化工艺技术

辽河油田东部凹陷火山岩油藏较为集中分布．然而常规酸化效果较差．经采用三元酸（粉末硝酸、盐酸和氢氟酸）前置液压裂酸化后．获得显著的增产效果，进一步表明该项酸化工艺技术成熟，宜于推广应用。同时也面临技术集成再创新机遇．适应更广泛的地质需求。     

杜84断块超稠油开发中后期稳产对策研究

对杜84断块超稠油生产中后期暴露的主要矛盾，即随着轮次升高，周期吞吐效果变差，井下技术状况日益变差。油层动用不均，汽窜加剧等问题进行了分析。并提出了相应的稳产对策-实施多井整体吞吐，大修复产，调剖等措施。现场应用证明，这些措施基本能够确保杜84断块超稠油中后期的稳产。     

Stability Criteria of Underground Workings under Zonal Disintegration of Rocks

Using the energy approach as the base, the criteria are developed for brittle rock failure in outcropping in the workings driven in the rock masses of different degree of disturbance. A method is presented for estimating the stability of workings under conditions of zonal disintegration.     

NUMERICAL SIMULATION OF TIP-CLEARANCE FLOW IN CASCADE

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｉｐ ｃｌｅａｒａｎｃｅｆｌｏｗｓｏｃｃｕｒｉｎｖａｒｉｏｕｓｅｎｇｉｎｅｅｒ ｉｎｇａｐｐｌｉｃａｔｉｏｎｓｓｕｃｈａｓａｘｉａｌ ｆｌｏｗ ｐｕｍｐｓａｎｄｄｕｃｔ ｅｄｐｒｏｐｅｌｌｅｒｓ .Ｔｈｅｉｎｅｒｔｉａｌｆｏｒｃｅｓａｃｔｉｎｇｕｐｏｎｔｈｅｆｌｕｉｄｉｎｔｈｅｎａｒｒｏｗ ｇａｐｂｅｔｗｅｅｎｂｌａｄｅｔｉｐａｎｄｔｈｅｓｕｒｒｏｕｎｄｉｎｇｗａｌｌａｒｅｓｕｆｆｉｃｉｅｎｔｔｏ ｇｅｎｅｒａｔｅａｔｉｐｌｅａｋａｇｅｖｏｒｔｅｘｏｎｔｈｅｓｕｃｔｉｏｎｓ…     

膨胀水泥浆体系在苏丹1/2/4区块水平井固井中的应用

随着苏丹1／2／4区块的深入开发，为了加快开发主力油层，提高原油产量，降低钻井成本，GNPOC在此区块布置水平井开发任务。所开发的区域主要分布于Heglig，Munga，Simbir，Bamboo区块，油层所在是Zaqar和Bentiue地层。此层位具有高渗透，地层温度高，易塌、气窜等复杂问题，尤其是Heglig和Munga地区井壁坍塌严重。为此，根据地质资料、井身结构和对水平井注水泥的技术要求，科学合理设计施工工艺，优选出适合此地区固井施工的冲洗液和隔离液，特别是经过努力实践，开发出了新型膨胀水泥浆体系，此体系具有高强度、低失水、无析水、防气窜之功效。结合使用哈里伯顿CPT—Y4大功率固井车，精确计量和自动密度控制，该体系水泥浆目前已在7口水平井施工中得以应用，均为优质井。现正在被大量使用，此体系的开发，解决了该固井技术难题，创造了中国固井在海外首次水平井作业一次成功的历史记录，具有较高的经济和社会效益。     

创建FTP服务器和设计磁盘配额的方法与实现

FTP是网络系统提供的基本服务之一．用户可以通过FTP上传和下载文件。本文介绍Linux系统的FTP服务器的原理以及建立FTP服务器和对FTP用户的磁盘配额进行设置。     

Block Copolymer Surface Reconstuction: A Reversible Route to Nanoporous Films

Thin films of block copolymers have been used as templates and scaffolds for the fabrication of arrays of nanostructured materials. In general, a chemical modification of the film or the removal of one of the components by photodegradative methods is required to produce a nanoporous film that serves as a template or scaffold. Here, however, the preferential interaction of one of the components with a solvent is shown to produce a reconstruction of the block copolymer film that, upon drying, leads to the generation of a nanoporous template. The area density of the pores is identical to that of the original copolymer thin film. Since no chemical reactions occurr, the process is fully reversible. Upon heating the copolymer film above its glass‐transition temperature, mobility is imparted to the copolymer and the original copolymer film with oriented domains is recovered. The film reconstruction significantly simplifies the generation of nanoporous templates.     

MIMO系统中的分组全分集全码率空时编码

针对未编码的多输入多输出（MIMO，Multi—Input Multi—Output）系统，提出一种复杂度适中的分组全分集全码率（GFDFR，Group—wise Full Diversity Full Rate）空时编码方案。该方案通过在发送端进行天线分组，各组独立编码，减小全分集全码率（FDFR，Full Diversity Full Rate）编码块的大小从而降低系统编解码复杂度；在频率选择性信道中，进一步对子载波分组进行独立编码，获得频率分集（或多径分集），以适中的复杂度在不降低系统分集度的情况下保证了信息的全码率传输，是一种在MIMO信道中极具实用价值的空时编码方案。     

Concurrent error detection of fault-based side-channel cryptanalysis of 128-bit RC6 block cipher

Fault-based side channel cryptanalysis is very effective against symmetric and asymmetric encryption algorithms. Although straightforward hardware and time redundancy based concurrent error detection (CED) architectures can be used to thwart such attacks, they entail significant overhead (either area or performance). In this paper we investigate two systematic approaches to low-cost, low-latency CED for symmetric encryption algorithm RC6. The proposed techniques have been validated on FPGA implementations of RC6, one of the advanced encryption standard finalists.     

A Micellar Route to Ordered Arrays of Magnetic Nanoparticles: From Size‐Selected Pure Cobalt Dots to Cobalt–Cobalt Oxide Core–Shell Systems

Starting with Co‐salt‐loaded inverse micelles, which form if the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) is dissolved in a selective solvent like toluene and CoCl₂ is added to the solution, monomicellar arrays of such micelles exhibiting a significant hexagonal order can be prepared on top of various substrates with tailored intermicellar distances and structure heights. In order to remove the polymer matrix and to finally obtain arrays of pure Co nanoparticles, the micelles are first exposed to an oxygen plasma, followed by a treatment in a hydrogen plasma. Applying in‐situ X‐ray photoelectron spectroscopy, it is demonstrated that: 1) The oxygen plasma completely removes the polymer, though conserving the original order of the micellar array. Furthermore, the resulting nanoparticles are entirely oxidized with a chemical shift of the Co 2p_3/2 line pointing to the formation of Co₃O₄. 2) By the subsequent hydrogen plasma treatment the nanoparticles are fully reduced to metallic Co. 3) By exposing the pure Co nanoparticles for 100 s to various oxygen partial pressures pequation/tex2gif-inf-5.gif, a stepwise oxidation is observed with a still metallic Co core surrounded by an oxide shell. The data allow the extraction of the thickness of the oxide shell as a function of the total exposure to oxygen (pequation/tex2gif-inf-7.gif × time), thus giving the opportunity to control the ferromagnetic–antiferromagnetic composition of an exchange‐biased magnetic system.