Theory of propagating deformation bands

A model for propagating deformation bands is developed, based on a mechanical equation of state and on evolution equations for the structure parameters. It is shown that, contrary to normal deformation, it is necessary to discriminate between global parameters which depend solely on time elapsed and local parameters which are functions of the strain history. Correspondingly, two sets of equations are presented, one describing the development of the global parameters in the course of time, the other giving the evolution of the local state parameters in the course of deformation, i.e. as a function of strain. Measurable quantities derived from the first set are the load serrations and the band velocity, while the second set yields the flow stress and the strain profile of the propagating band.     

Generation of interfacial instabilities in charged electrified viscous liquid films

This study is concerned with the stability of a two-dimensional incompressible conducting liquid film surrounded by a passive conducting medium, when an electric field is applied in a direction parallel to the initially flat bounding fluid interfaces. Currents generate charges at the bounding interfaces which in turn affect the stress balances there. In the absence of an electric field, the viscous liquid film is stable (instability can be induced by the inclusion of van der Waals forces for ultra thin films). A complete model is presented, at arbitrary Reynolds number, which accounts for conductivity and permittivity contrasts between the fluid and surrounding medium, as well as surface tension. The linear stability of the system is considered for arbitrary Reynolds numbers and it is shown that the stable film can become unstable if, (i) σ _R ɛ _p >1, or (ii) σ _R ɛ _p <1 and (σ _R −1)(1−ɛ _p )<0, where σ _R is the ratio of outer to inner conductivity and ε _p is the ratio of inner to outer permittivity. Instability is possible only if the electric field is non-zero and the scalings near bifurcation points that can be used to construct nonlinear theories are calculated. Several asymptotic limits are also considered including zero Reynolds numbers and short or long waves. The instability criteria given above are constructed explicitly in the case of Stokes flow.     

Intriguing nonlinear dynamics of a controller with a sluggish actuator

We apply a bifurcation-theoretic approach to the standard Moore–Greitzer compressor model in effort to understand a curious phenomenon. When one forces the actuator to respond sluggishly to commanded inputs, performance of the controller improves dramatically. We show that the behavior can be explained via Hopf–Hopf interactions of surge and rotating stall. Also, we argue that there is a broad class of controllers which possess the general dynamic features responsible for the surprising effectiveness of sluggish actuators.     

油砂地层中子-伽玛能谱Monte-Carlo模拟

本工作应用自行研制开发的中子 伽玛能谱测井的中子 伽玛射线随空间、能量、时间分布的蒙特卡罗模拟软件包计算了裸眼井、井眼里无下井仪器、油饱和砂岩地层、井眼注油条件下沿井轴和井壁的中子 伽玛射线随能量、时间分布及沿井轴和沿井壁的中子 伽玛射线能谱 ,研究了源距对中子 伽玛射线随能量、时间分布以及井轴与井壁中子 伽玛射线能谱的影响。     

单模光纤最小群速度色散波长附近的调制不稳定性

利用修正的非线性Ｓｃｈｒｏｄｉｎｇｅｒ方程研究了单模光纤最小群速度色散波长附近的调制不稳定性，发现了一个新的由光纤四色散导致的调制不稳定性区域，该区域的调制范围与初始入射脉冲的功率和四阶色散有关。     

洛阳热电厂主厂房地基处理方案的论证

通过对洛阳热电厂拟选择的地基处理方案进行比较,并结合该电厂施工实例论证了φ800/1600扩底钢筋混凝土灌注桩是最适于该电厂及相似地区的地基处理方式。     

Transition to turbulence in rotating-disk boundary layers—convective and absolute instabilities

This work is an experimental study of mechanisms for transition to turbulence in the boundary layer on a rotating disk. In one case, the focus was on a triad resonance between pairs of traveling cross-flow modes and a stationary cross-flow mode. The other was on the temporal growth of traveling modes through a linear absolute instability mechanism first discovered by Lingwood (1995, J Fluid Mech 314:373–405). Both research directions made use of methods for introducing controlled initial disturbances. One used a distributed array of ink dots placed on the disk surface to enhance a narrow band of azimuthal and radial wave numbers of both stationary and traveling modes. The size of the dots was small so that the disturbances they produce were linear. Another approach introduced temporal disturbances by a short-duration air pulse from a hypodermic tube located above the disk and outside the boundary layer. Hot-wire sensors primarily sensitive to the azimuthal velocity component, were positioned at different spatial (r,θ) locations on the disk to document the growth of disturbances. Spatial correlation measurements were used with two simultaneous sensors to obtain wavenumber vectors. Cross-bicoherence was used to identify three-frequency phase locking. Ensemble averages conditioned on the air pulses revealed wave packets that evolved in time and space. The space–time evolution of the leading and trailing edges of the wave packets were followed past the critical radius for the absolute instability, r _{c A} . With documented linear amplitudes, the spreading of the disturbance wave packets did not continue to grow in time as r _{c A} was approached. Rather, the spreading of the trailing edge of the wave packet decelerated and asymptotically approached a constant. This result supports the linear DNS simulations of Davies and Carpenter (2003, J Fluid Mech 486:287–329) who concluded that the absolute instability mechanism does not result in a global mode, and that linear-disturbance wave packets are dominated by the convective instability. In contrast, wave-number matching between traveling cross-flow modes confirmed a triad resonance that lead to the growth of a low azimuthal number (n = 4) stationary mode. At transition, this mode had the largest amplitude. Signs of this mechanism can be found in past flow visualization of transition to turbulence in rotating disk flows.     

An investigation of the unstable region for dense phase conveying in sliding bed flow

For fine powdered materials, capable of being conveyed in dense phase, a conveying region exists in which instability in flow and pipeline blockage can occur if the pressure gradient available is insufficient to maintain a minimum value of solids loading ratio. A reduction in material flow rate can also lead to pipeline blockage in this region. Conveying trials under-taken with cement are used to illustrate the nature of the problem.     

露天矿山裂隙岩体爆破孔距变化的研究

文中指出裂隙岩体大孔距爆破在一点条件下与结构面的特性变化关系密切，并按两组三结构面建立了孔距计算公式。     

Dynamic elastic-plastic buckling phenomena in a rod due to axial impact

Dynamic elastic-plastic buckling phenomena which might develop in a rod from an axial impact loading are studied in order to identify the conditions for quasi-static behaviour. A discrete model for dynamic elastic-plastic buckling, which retains the axial and the lateral inertia forces, is proposed, and the relationship between the model parameters and the characteristics of an actual structure is given. Examples of different external loadings and boundary conditions are considered in order to clarify the influence of elastic-plastic axial wave propagation on the buckling process. The critical time for the initiation of buckling is obtained and the post-buckling behaviour of the model is analysed. Particular attention is paid to the role of the striking mass on the characteristics of the buckling process and on the development of the buckling shape. The numerical study reveals that the inertia of the striking mass affects considerably the development of the buckling shape causing different patterns of axial strain distributions at the initiation of buckling. The comparisons which are made between the model predictions and some previously published experimental data show that the buckling process is governed by the impact velocity as well as by the external loading history provided by the experimental technique.