纳米SiO_2与有机物分子的亲和性和分散性

介绍纳米SiO2的合成和粒子表面的粗糙形貌以及纳米粒子链具有类似高分子链的弹性力学属性,研究纳米SiO2的亲合性,探讨亲合性对纳米SiO2的分散、改性、应用的影响。研究表明,在极性外加剂(如乙二胺、乙二醇、PEG、PDMS、PTHF、PMMA、PBMA等)存在的情况下,纳米SiO2的弹性粒子链和硅烷醇对SiO2的分散和改性具有显著的影响。带有大烷基侧链的高分子链与SiO2表面的亲合能较低,而带有官能团的高分子链与SiO2表面具有较高的亲合性。     

微波宽频带功率负载的研究

介绍了５００Ｗ宽频带功率负载的设计及实验结果，并将研究成果扩展到１０～１０００Ｗ范围。负载主要技术指标：输入阻抗５０Ω，频带宽度０～１０００ＭＨｚ，电压驻波比≤１．１．表面最高温升△ｔ≤１００℃。     

对等张力链条机构设计的再思考

为解决震源在振动器提升后链条与销轴的断裂问题,应采用等张力原理对链条提升机构进行改进设计。经野外实践证明,这种机构基本上能够满足野外工作的要求。本文对目前所采用的机构形式可能存在的改进设计进行了分析。     

APPLICATION OF THE POLYMERASE CHAIN REACTION TO THE RAPID ANALYSIS OF BREWERY YEAST STRAINS

The rapid discrimination of closely-related Saccharomyces cerevisiae strains can pose a significant problem to breweries, in particular where closely related strains are being used simultaneously to manufacture different products. In this study, two PCR approaches have been examined to assess their usefulness for the discrimination of brewery ale and lager yeast strains. PCR using arbitrary primers (RAPD PCR) was found unsuitable for such an application since the DNA profiles generated from brewery strains were generally found to be identical, due presumably to the close genetic relatedness of these yeasts. In contrast, PCR using δ sequence primers could rapidly differentiate between many ale and lager strains and characteristic profiles for these were generated. This method could also be applied directly to yeasts isolated from brewery worts or from active dried yeast preparations. Results of such analyses were available within the working day.     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

基于分形理论的供应链管理模型分析

为了克服日益复杂的供应链问题,在分形理论的基础上介绍了分形供应链的概念和特点,认为分形供应链所具有的自相似、自组织、自优化等特点可以很好地提高供应链的灵活性,增强适应环境的能力.在此基础上进一步研究了分形供应链的结构模型和运作模型,探讨了其现实意义.     

高科技企业的供应链管理特点研究

高科技企业的供应链管理研究对于指导高科技企业的运作具有重要意义。本文从建立供应链合作伙伴关系、建立适应高科技企业发展的分销渠道、合理的组织间交易激励政策的设计、供应链流程的优化和集成等四个方面对高科技企业的供应链管理进行了论述。     

双谱估计在导引头信号检测与处理中的应用

双谱估计是一种应用广泛的高阶谱估计。将双谱估计应用于超宽带导引头信号检测与处理系统中,为导引头信号处理中的平滑和滤波增添了一种新的方法。仿真结果表明该方法是有效的。     

钌基厚膜电阻传导模型初探

介绍钌基厚膜电阻的三种传导模型。三种模型都可以得到较满意的R—V曲线，不足处是链模型得出电阻率和导电相粒子形状及尺寸的关系和实验事实不符；有效介质模型不能反映厚膜电阻形成过程中众多因素的影响；渗透模型很多参数的获得有赖经验公式。渗透模型能反映烧结过程中更多因素的影响，并可解释方阻与导电相粒度及峰值温度的变化关系。     

量子阱红外探测器能带结构的计算

利用电子波在阱与垒的界面上的反射及干涉效应，计算了量子阱红外探测器(QWIP)的能带结构，并对其适用性进行了分析和讨论。通过与K-P模型比较发现，本方法对计算较宽势阱(阱宽大于4nm)的量子阱结构的电子态适合。在垒宽和阱宽不变条件下，用两种方法计算得到的AlGaAs／GaAs量子阱材料中Al组分x与吸收峰值波长λp的关系曲线基本相同。结果说明，在较宽的范围内，本方法对QWIP能带结构的计算是适用且简便的。