生物降解型聚碳酸顺丁烯二酸亚乙酯 1、合成和表征

用CO_2、环氧乙烷、顺丁烯二酸酐进行三元共聚首次得到聚碳酸顺丁烯二酸亚乙酯(PECM),并用IR、~1H NMR、DSC等进行了表征,共聚物链中CO_2和MA单元随机分布,不饱和单元可在0～0.5mol分数之间调节。共聚过程不发生双键交联和构型转化。环氧乙烷的转化率可高达到93％。控制PECM链上的双键含量并使之发生自由基加成反应,得到对热较稳定的可溶性产物。     

A theory for the formation of tetrahedral amorphous carbon including deposition rate effects

A theoretical model is presented to describe the effect of ion beam bombardment rate on the formation of tetrahedral amorphous carbon (ta-C) films. The critical ion energy, E_c, corresponding to a 50% sp³ content in the films, is found to be dependent on both the effective thermal resistance and the ion beam bombardment rate. In the model, the ‘window’ width in the ion energy scale for the formation of ta-C material increases with decreasing deposition rate and with a reduction in the effective thermal resistance, until limited by lower and upper boundary thresholds. Experimental data are reproduced by the model. The plasmon energy, which correlates with sp³ fraction, is found experimentally of be higher for lower deposition rate and smaller effective thermal resistance. Data points for high sp³ content ta-C films deposited on silicon substrates at room temperature occupy a region in the ion energy-deposition rate (E-r) diagram similar to that predicated from the theory.     

Carbon fibre cloth as an electrode material: electrical conductivity and mass transfer

The paper deals with carbon fibre cloth electrodes, employed in the fabrication of composite materials. The electrical conductivity of single bundles, groups of bundles and cloth is studied. Ohm's law applies to the electrical conduction in the direction of the fibre length, but bundle conductivity decreases with the number of fibres in the bundle. Electrochemical mass transfer between a flowing electrolyte and a cloth arranged as a flow-through or a flow-by porous electrode indicates the existence of double porosity in the material. Due to double porosity, only the external surface of the cloth works as an electrode. This finding shows that the material is not suitable for such an application.     

Evolution of BET internal surface area in glassy carbon powder during thermal oxidation

It is demonstrated that glassy carbon powder can be thermochemically activated. During activation, a film with open pores is created on the glassy carbon particles. This film has a large internal surface area, which is accessible to liquids and gases. A simple model for the evolution of the internal surface area in glassy carbon powder during thermochemical gas-phase oxidation is also presented and compared with experimental data. Experimental results are in qualitative agreement with the model. We found that a sharp particle size distribution is desirable with regard to potential technical applications.     

Three‐dimensionally braided carbon fiber–epoxy composites,a new type of material for osteosynthesis devices. I. Mechanical properties and moisture absorption behavior

In recent years, three‐dimensionally (3D) braided composites have attracted a great deal of attention because of their high‐impact damage tolerance and fatigue life, superior fracture toughness, and so forth, and have been used in aeronautics, military, and transportation. These advantages make them strong candidates for osteosynthesis devices. In this study, 3D braided carbon fiber–epoxy (C_3D/EP) composites were produced via a simple vacuum impregnation technique. The load‐deflection curve, mechanical properties, and influence of fiber volume fraction, braiding angle, and axial reinforcing fibers were examined to determine their suitability for internal fixation devices. It is found that the C_3D/EP composites have excellent toughness and do not show brittleness when fractured because of their relatively high void content. The flexural, shear, and impact strengths of the C_3D/EP composites are excellent. It was shown that a C_3D/EP composite with a stiffness similar to load‐bearing bones can be made while maintaining enough strength. It is concluded that a relatively higher void content and braiding angle is more suitable for the C_3D/EP composites from the viewpoint of requirements of fracture fixation materials. The moisture absorption behavior and changes in mechanical properties caused by moisture uptake were evaluated. Results show that absorbed moisture slightly decreases mechanical properties of the C_3D/EP composites. Contrary to the unreinforced epoxy, the moisture absorption behavior of the C_3D/EP composites cannot be described with Fick's law of diffusion, probably because of the presence of voids and/or 3D fiber structure. The exact mechanisms should be proposed in further investigations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1031–1039, 2002     

莺歌海盆地CO2成因及运聚特征的初步研究

在已获天然气地地化资料的基础上，重点论述了ＣＯ２天然气地化特征及成因类型，追踪和判识ＣＯ２气烃类气的气源，初步了ＯＣ２气的分布特征及控制因素，指出本区ＣＯ２气属壳源型岩石化学的成因，气源主要来自莺黄组中、下部含钙海相泥岩，与深部火山慢源的ＣＯ２气无关，谱不具深源的特征。     

Predictive modeling of mercury speciation in combustion flue gases using GMDH-based abductive networks

Modeling mercury speciation is an important requirement for estimating harmful emissions from coal-fired power plants and developing strategies to reduce them. First-principle models based on chemical, kinetic, and thermodynamic aspects exist, but these are complex and difficult to develop. The use of modern data-based machine learning techniques has been recently introduced, including neural networks. Here we propose an alternative approach using abductive networks based on the group method of data handling (GMDH) algorithm, with the advantages of simplified and more automated model synthesis, automatic selection of significant inputs, and more transparent input–output model relationships. Models were developed for predicting three types of mercury speciation (elemental, oxidized, and particulate) using a small dataset containing six inputs parameters on the composition of the coal used and boiler operating conditions. Prediction performance compares favourably with neural network models developed using the same dataset, with correlation coefficients as high as 0.97 for training data. Network committees (ensembles) are proposed as a means of improving prediction accuracy, and suggestions are made for future work to further improve performance.     

On-line H NMR spectroscopic investigation of hydrogen bonding in supercritical and near critical CO2–methanol up to 35 MPa and 403 K

On-line NMR spectroscopy can beneficially be applied to studies of supercritical and near-critical fluids as an alternative to optical spectroscopy. Up to now high pressure NMR experiments are predominantly accomplished using custom made NMR batch reactors. The authors present a novel high pressure cell with displacement plunger for on-line NMR experiments on compressible fluids which can be used in conjunction with commercially available SCF NMR flow probes. The on-line technique offers advantages compared to stopped flow techniques such as enhanced control of mixture composition and reaction parameters as well as the facility of engagement into the reaction. The new apparatus is used for NMR studies on hydrogen bonding of methanol in near critical and supercritical carbon dioxide up to 403 K and 35 MPa for which data on the chemical shift of the hydroxyl group and methyl group are reported and interpreted.     

Vinyl acetate monomer—a pilot plant study

The kinetics of the reaction of acetic acid and acetylene over zinc acetate-activated carbon catalyst was investigated over a wide range of process variables in a pilot reactor. Although various catalytic reaction mechanisms were postulated, the rate of reaction was most satisfactorily correlated by a mechanism of surface reaction between charged adsorbed acetic acid and acetylene, which assumes that the rate controlling step was the irreversible charged adsorption of acetylene and acetic acid.