Reactivity,chemical structure,and molecular mobility of urea–formaldehyde adhesives synthesized under different conditions using FTIR and solid‐state 13C CP/MAS NMR spectroscopy

This study was conducted to investigate the effects of reaction pH condition and hardener type on the reactivity, chemical structure, and molecular mobility of urea–formaldehyde (UF) resins. Three different reaction pH conditions, such as alkaline (7.5), weak acid (4.5), and strong acid (1.0), were used to synthesize UF resins, which were cured by adding four different hardeners (ammonium chloride, ammonium sulfate, ammonium citrate, and zinc nitrate) to measure gel time as the reactivity. FTIR and ¹³C‐NMR spectroscopies were used to study the chemical structure of the resin prepared under three different reaction pH conditions. The gel time of UF resins decreased with an increase in the amount of ammonium chloride, ammonium sulfate, and ammonium citrate added in the resins, whereas the gel time increased when zinc nitrate was added. Both FTIR and ¹³C‐NMR spectroscopies showed that the strong reaction pH condition produced uronic structures in UF resin, whereas both alkaline and weak‐acid conditions produced quite similar chemical species in the resins. The proton rotating‐frame spin–lattice relaxation time (T_1ρH) decreased with a decrease in the reaction pH of UF resin. This result indicates that the molecular mobility of UF resin increases with a decrease in the reaction pH used during its synthesis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2677–2687, 2003     

石莼基微/中孔复合结构活性炭的制备及性能

以海洋海藻废弃物石莼为原料,通过热解预炭化,KOH活化制备活性炭。以碘吸附值和亚甲基蓝吸附值为吸附性能评价指标,探究了活化工艺对活性炭吸附性能的影响。结果表明,当KOH与石莼半焦质量比(碱炭比)为3.0∶1.0、活化时间为45 min、活化温度为800℃时,活性炭吸附性能最优,其碘吸附值和亚甲基蓝吸附值最大,分别为1824.19 mg/g、914.98 mg/g。FTIR测试表明,活性炭含有大量羟基等官能团。SEM测试表明,活性炭表面粗糙、存在大量孔结构。活性炭的BET比表面积为2616.3 m2/g,Langmuir比表面积高达4883.5 m2/g,平均孔径为2.73 nm。石莼基活性炭的孔结构为微/中孔复合结构,有作为储能、环保材料的潜质。     

SE-I型混凝剂在水处理中的应用

利用透射电镜和微孔滤膜超滤法研究了SE -I和PAC混凝剂的结构形貌和相对分子质量分布情况 ;比较了SE -I和PAC混凝处理油田含油废水、煤矿矿井废水和水库水的效果。实验结果表明 ,SE -I较PAC具有更大的枝化度和相对分子质量 ,体现在水处理效果上是SE -I较PAC有更好的除油、除浊、去除COD和脱色效果。SE -I型混凝剂是一种高效水处理剂     

大型常压锥顶贮罐的设计

以工程实例为依据，论述国内以往较少采用的大型梁柱式支承锥顶贮罐的结构，介绍了国内外相关设计标准，给出了贮罐的典型结构－斜椽，横梁和立柱的计算公式，并用Excel电子表格编制了计算书。     

A variable gap penalty function and feature weights for protein 3-D structure comparisons

We have developed a variable gap penalty function for use inthe comparison program COMPARER which aligns protein sequenceson the basis of their 3-D structures. For deletions and insertions,components are a function of structural features of individualamino acid residues (e.g. secondary structure and accessibility).We have also obtained relative weights for different featuresused in the comparison by examining the equivalent residuesin weight matrices and in alignments for pairs of 3-D structureswhere the equivalences are relatively unambiguous. We have usedthe new parameters and the varible gap penalty function in COMPARERto align protein structures in the Brookhaven Data Bank. Thevariable gap penalty function is useful especially in avoidinggaps in secondary structure elements and the new feature weightsgive improved alignments. The alignments for both azurins andplastocyanins and N- and C-terminal lobes for aspartic proteinasesare discussed     

激发态光物理的拓扑控制：对（N，N＇－二正癸基）氨基苯甲腈的簇集与光诱导分子内电荷转移

在水－二氧六环混合介质中，对二正癸基氨基苯甲腈（ＤＤＡＢＮ）分子，在水的体积分数超过０．５后，发生簇集并可观察到双重荧光发射且长波长发射带位置与在纯二氧六环中相近。该发射带被证实系分子内扭转电荷转移（ＴＩＣＴ）带。吸收光谱表明ＤＤＡＢＮ簇集体为Ｊ－型。     

Application of silica-containing nano-composite emulsion to wall paint: A new environmentally safe paint of high performance

A new emulsion-type paint was prepared by utilizing a nano-composite emulsion (NCE), which contained nano-size particles (ca. 60 nm in diameter) consisting of silica (inorganic core, ca. 30 nm in diameter) and polyacrylate (organic shell), and evaluated as wall paint. By applying NCE for the wall paint, about 35 wt.% of the organic content in the paint could be reduced in comparison with the commodity emulsion-type paint, which is highly effective to save the petroleum resources. The basic properties of the white NCE paint film on gloss, surface hardness, adhesion, and solvent resistance were evaluated and compared with those of acrylic emulsion-type paints as well as those of silica-containing paints which were prepared simply by blending the acrylic emulsion with silica sol. The NCE paint was especially excellent in solvent resistance. Then the practical tests were performed to evaluate its appropriateness as wall paint, which clarified the excellent antipollution property and the high flame resistance of the NCE paint.     

Solid state magnetic resonance spectra of Illinois No. 6 coal and some reductive alkylation products

Illinois No. 6 coal and its reductive methylation and butylation products have been studied by magnetic resonance techniques. Conventional CP-MAS¹³Cn.m.r. spectroscopy indicates that 62% of the carbon atoms in the coal are aromatic and that about 6% of the carbon atoms are carbonyl. Esters are more abundant than carboxylic acids. The resonances of methoxy groups and other novel etheric carbon atoms are apparent in the high field region. Dipolar dephasing experiments suggest that methyl carbon atoms constitute no more than 16% of the carbon, methylene and methine carbon atoms about 14% and quaternary aliphatic carbon atoms about 2%. The dipolar dephasing experiments in conjunction with previous work also permit estimates of the hydrogen atom distribution. The THF-insoluble products obtained in the reductive alkylation reactions with¹³C-enriched alkylating agents contain paramagnetic and ferromagnetic substances that adversely influence the solid state n.m.r. spectra. However, good ¹³C n.m.r. spectra were obtained after these substances were extracted with aqueous hydrochloric acid. The O:C alkylation ratios are 1.2 and 1.0 for methylation and butylation, respectively. Dipolar dephasing experiments establish that the decay constants of functional groups in the whole coal and of C- and O-methyl-¹³C and C- and O-butyl-1 -¹³C nuclei in the labelled coal molecules are very similar to those of reference compounds. These findings suggest that the decay constants measured for the ¹³C nuclei in coals and coal-derived solids provide reliable information about their degree of substitution.     

三层结构的氧化锆陶瓷整体烧结研究

对三层结构的ZrO2陶瓷的整体烧结行为进行了较深入的研究,提出了提高三层结构的ZrO2陶瓷整体烧结的措施。研究结果表明:对于三层结构的ZrO2陶瓷,通过采取波浪型界面结构,改进表面层配方,降低升温速率等手段能获得整体烧结性能良好,抗弯强度达到682MPa,硬度15.56GPa的力学性能优良的复合陶瓷材料。     

Influence of polymerization conditions on the structure and properties of polyethylene/polypropylene in‐reactor alloy synthesized in the gas phase with a spherical Ziegler–Natta catalyst

A spherical TiCl₄/MgCl₂‐based catalyst was used in the synthesis of in‐reactor polyethylene/polypropylene alloys by polyethylene homopolymerization and subsequent homopolymerization of propylene in the gas phase. Different conditions in the ethylene homopolymerization stage, such as monomer pressure and polymerization temperature, were investigated, and their influences on the structure and properties of in‐reactor alloys were studied. Raising the polymerization temperature is the most effective way of speeding up polymerization and regulating the ethylene content of polyethylene (PE)/polypropylene (PP) alloys, but it will cause a greater increase in the PE‐b‐PP block copolymer fraction (named fraction D) than in the fraction of PP‐block‐PE in which the PP segments have low or medium isotacticity (named fraction A). Although changing ethylene monomer pressure could influence the ethylene content of PE/PP alloys slightly, it is an effective way of regulating the structural distribution. Reducing the monomer pressure will evidently increase fractions A and D. The mechanical properties of the alloys, including impact strength and flexural modulus, can be regulated in a broad range with changes in polymerization conditions. These properties are highly dependent on the amount, distribution, and chain structure of fractions A and D. The impact strength is affected by both fraction A and fraction D in a complicated way, whereas the flexural modulus is mainly determined by the amount of fraction A. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2136–2143, 2006