In-situ monitoring of the stabilization with hydrogen of free radicals thermally induced from coal using high pressure e.s.r., d.t.a. and p.d.a. equipment

High temperature, high pressure e.s.r. measurements of the hydrogenation reaction of Taiheiyo coal in the presence of catalysts were carried out to understand the stabilization of thermally and/or catalytically induced free radicals. A decrease in free radical concentration with increasing temperature was observed for ZnCl₂ and SnCl₂ · 2H₂O catalysts at 10MPa under hydrogen gas. High pressure modified single-cell d.t.a. and p.d.a. equipment augmented the uniquely designed high temperature, high pressure e.s.r. cell. The hydrogenation reaction was monitored under the same experimental conditions as for e.s.r. From the results of the combination of high temperature, high pressure e.s.r. with high pressure d.t.a. and p.d.a., it was established that H₂ molecules can react efficiently with free radicals from coal molecules created by the presence of ZnCl₂ and SnCl₂ · 2H₂O catalysts.     

Comparative reactivities of coal asphaltenes during hydropyrolysis

Comparisons have been drawn in the relative reactivities of three coal asphaltenes during hydropyrolysis. All were derived from hydrogen donor-solvent extracts of bituminous coal, but had different hydrotreatment histories and different carbon contents (87.1, 91.9 and 90.8 wt% for asphaltenes 1, 2 and 3, respectively). The hydropyrolyses were carried out in the presence of CoO–MoO₃ catalyst and gaseous hydrogen at 8.7 MPa. For two of the asphaltenes (1 and 2) systematic comparisons were made for different reaction times at 425°C; for all three asphaltenes comparisons were made for l h of hydropyrolysis at 425°C. The general pattern of asphaltenes conversion indicated that more pentane-soluble product was produced from asphaltene isolated from straight coal extract (asphaltene 1). For the asphaltenes isolated from hydrotreated extracts, the extent of conversion to liquids was limited when the carbon content was high (asphaltene 2) although the pattern of conversion was similar in the other hydrotreated asphaltene (asphaltene 3). The aliphatic content of the liquid products formed was low, and the distribution of hydrogenated species in the highly aromatic liquid products indicated that complete hydrogenation of the polyaromatics produced in pyrolysis is difficult. Altogether the aliphatics made up ≈ 10 wt% of the asphaltene 1 hydropyrolysate. Aromatic hydrocarbons made up 90% of the liquid product. Phenanthrene, pyrene and anthracene were prominent, and the largest component in the mixture was phenanthrene which, together with other polyaromatics such as fluoroanthene, dominated the liquid product.     

国内外型焦生产工艺及发展前景

介绍了国内外型焦技术的生产工艺、型煤碳化的过程和影响因素,以及国内目前几种碳化窑炉,通过对型焦和焦炭的对比分析,指出洁净型焦生产技术的优势必然会使它在未来具有巨大的发展空间。     

石灰石在煤气化过程中的催化和固硫作用

基于CaO在煤气化中的催化和固硫作用,以及石灰石加热分解的性质,石灰石有可能作为煤气化过程中的催化剂和固硫剂。本文根据国内外对石灰石在煤燃烧和煤气化中作用的研究,从石灰石结构、Ca/C,Ca/S,可能的反应机理等几个方面进行了介绍和分析,并指出需进一步研究的内容。     

双阳煤在PKM气化炉试烧总结

介绍了在PKM气化炉中弱粘结性双阳煤的试烧情况,并给出了主要工艺参数控制范围。试烧结果表明:依兰煤中配入50%双阳煤,汽氧比6.0:1时,气化炉工况良好。     

离子色谱法测定配煤、焦炭和焦油中的氯含量

研究了用带电导检测器的离子色谱对配煤、焦炭和焦油中的Cl- 进行测定的方法。在YSA型8126A-4# 阴离子分离柱上用3.5mmol/LNa2CO3、5.3mmol/LNaHCO3做淋洗液对Cl-进行测定,方法简便快速。Cl-的检出限为2×10-6。该法也适用于F-、NO2-、NO3-、SO42-等的测定。     

Assessing the predictive capability of two‐phase models for the mechanical behavior of alumina/epoxy nanocomposites

A review of analytical modeling of particulate reinforcement is made as a prelude to the problem of microstructural inhomogeneity in nanocomposite materials. Noting the inevitability of dispersion nonuniformity, and variations in agglomerate morphology and filler‐matrix interaction, the need to question the application of such models to novel materials arises. Employing the mechanical properties of alumina/epoxy nanocomposites, with known dispersion characteristics, an evaluation of the predictive capability of various models for Young's modulus, strength, and failure strain is made. Comparison between models is accompanied by a discussion of the parameters used in the fitting of macroscopic behavior to microstructural features. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 869–879, 2005     

两步法合成大粒径丁苯胶乳

研究了聚甲基丙烯酸甲酯（MMA）对丁苯（BS）胶乳的附聚作用以增大丁苯胶乳粒径；探讨了无机盐、体系pH值及体系中MMA胶乳与BS胶乳的固含量比（R值）对附聚后丁苯胶乳的粒径及稳定性的影响。结果表明：适当添加无机盐可以稳定胶乳体系，最佳用量（质量分数）为0．1％～0．2％；适当增大体系pH值，可增大胶乳粒径；在附聚过程中，当R值在两个附聚峰附近时，可增大丁苯胶乳的粒径。     

Crystalline complex between poly(γ-methyl l-glutamate) and dimethyl phthalate

The crystalline complex between poly(γ-methyl l-glutamate) (PMLG) and dimethyl phthalate (DMP) has been formed in films cast from a solution in dichloroethane. It has the stoichiometry of 1 mol of DMP to three or four residues of PMLG and shows two definite characteristics in X-ray diffraction patterns; one is the large hexagonal unit cell with the edge of around 28 Å and another the ‘extra’ 5.07 Å meridional reflection which can not be interpreted by a PMLG α-helical conformation. The structural examination for the films with various DMP contents is carried out by X-ray, viscoelastic, and d.s.c. measurements and the following structure is proposed for the crystalline complex. Four PMLG are associated to form a group which is hexagonally packed and DMP molecules, located in the gaps between groups, form a specific favourable helical structure along PMLG chains in which the van der Waals stacking of benzene rings of DMP is significant.     

Free radicals in coal and coal conversions. 8. Experimental determination of conversion in hydroliquefaction

The results of conversion determinations on the products from Powhatan No.5 coal liquefied in an autoclave and in a high-pressure, high-temperature e.s.r. cavity are reported. Oil, asphaltene and preasphaltene yields, and overall conversion have been determined for Powhatan No.5 coal samples liquefied in tetralin, SRC-11 heavy distillate, and naphthalene at temperatures from 400 to 480 ° C in both reactor systems. The concept of reaction severity is introduced and used to formalize the relation between the effect of temperature and reaction time on oil yield and conversion. Oil is the predominant product in liquefaction in tetralin or naphthalene, asphaltene is the major product of liquefaction in SRC-II heavy distillate. Retrogressive reaction (THF-insoluble product formation) becomes severe when SRC-II heavy distillate is the liquefaction solvent and residence time of >10 min are used at temperatures >450 °C. Preasphaltenes appear to be the only intermediate species in Powhatan No.5 liquefaction.