实用M2052合金阻尼行为表征

名义组分为Mn-20Cu-5Ni-2Fe(原子分数，％)的M2052合金，具有很高的强度和阻尼性能．对该合金在不同条件下的阻尼性能采用多种方法进行了表征．该合金的高阻尼态出现在一个临界温度以下，该温度可以通过改变组分和热处理来调整．合金的室温阻尼性能强烈地依赖于频率、应变振幅以及静载荷的大小．     

PVC基阻尼涂料的制备及其流变性能

以聚氯乙烯（PVC）为基体，对苯二甲酸二辛酯（DOTP）为增塑剂，与无机填料CaCO3、钙锌热稳定剂、乳化剂OP-10、润滑剂液体石蜡等复合改性制备PVC基阻尼材料，采用动态流变仪DHR、动态热机械分析仪DMA、扫描电镜SEM等对试样的性能和形态进行表征。运用正交设计探究各组分对性能的影响规律，结果表明，填料CaCO3和增塑剂DOTP比例对其阻尼性能影响最显著；当PVC: CaCO3: DOTP: OP-10比重为45: 33: 22: 2时，25℃时频率0.01～150 Hz范围内，tan δ最大值从0.497提高到0.604；剪切速率0.1 s-1时表观黏度为3738 Pa·s，剪切速率150 s-1时表观黏度为2.19 Pa·s，具有优异的抗流挂性与稳定性。通过LASD形态分析构建微观聚集态模型，提出刚性填料团聚-解团聚和聚合物微球变形对流变性能的作用机理，为LASD的持续研究提供技术思路和理论基础。     

Effect of miscibility and forced compatibility on damping properties of CIIR/PAc blend

In this study, a kind of novel damping materials was prepared based on the blend of chlorinated butyl rubber (CIIR) and polyacrylate (PAc) synthesized by different molar ratio of butyl methacrylate and ethyl acrylate. Research results from experiments and analyses by employing DMA, TEM, and FTIR show that whether at a cocured system or noncocured system, it can be achieved to shift a loss peak of CIIR towards a higher temperature region and to keep the damping value from markedlly decreasing, which broadens the effective damping function area of CIIR to the vicinity of ambient temperature. In the former system, the thermodynamical miscibility of CIIR and PAc, to some extent, is predominated by the molecular design of PAc, while in the latter system, covulcanized networks play a more significant role in improving compatibility and abating the peak split, though the suppression effect of thermal stress on the transition of CIIR T_ll transition still can not be neglected. Furthermore, transition state derived from the cocuring CIIR and PAc cannot make the phase separation completely take place, and consequently results in the deformation of phase morphology of the cocured CIIR/PAc blend. It is the influence of thermodynamics miscibility and forced compatibility in different size that makes the suppression effect of foreign PAc on CIIR T_ll transition be controllable. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3127–3133, 2006     

强震区土石坝筑坝材料动力特性试验研究(投稿研究生论坛)

土石坝筑坝材料的动力特性是进行坝工设计和动力评价的基础。以西部强震区某土石坝工程为研究对象,采用室内动三轴试验,对其坝壳料、心墙料和坝基断层料进行动力特性试验研究,并以Hardin-Drnevich模型为基础,确定筑坝材料的动弹模、阻尼比等特性参数,试验表明：在动应变在10-6 ～ 10-5 范围内,动模量与围压、固结比成正相关;随动模量的增大,相关性降低;动应变和振级的拟合指数模型则表明不同围压、固结比的心墙料的应变-振级曲线趋势一致,坝壳料较为离散;试验中固结围压对粗骨料阻尼比-应变曲线的影响较固结比大,可为强震区土石坝的动力稳定评价提供可靠的理论依据。     

IPN压电阻尼材料的研究进展

阻尼材料广泛应用于交通工具、产业机械、建筑土木、家用电器、精密仪器和军事装备等领域。科学技术的不断发展,对阻尼材料的要求不断提高。本文主要综述了阻尼材料的发展状况,阐述了粘弹性阻尼、高阻尼合金、阻尼复合以及聚合物基压电智能阻尼材料的阻尼机理,并详细分析介绍了聚合物基IPN压电阻尼材料的设计原理及阻尼效果。     

降噪高分子材料及其应用

降噪材料按降噪机理可分为阻尼减振材料、吸声材料和隔声材料。降噪高分子材料可广泛应用于建筑、交通、化工和生活等各个领域。综述了降噪高分子材料的主要种类及其作用机理，并对高分子降噪材料的研究现状和应用情况作了简单的介绍。     

Mechanical and dynamic mechanical properties of jute fibers–Novolac–epoxy composite laminates

A study was done of jute composite using a polymer matrix of epoxidized Novolac resin (ENR), diglycidyl ether of bisphenol A (DGEBA)–based epoxy, and their blends with different weight percentages of the resins. It was found that on blending ENR with DGEBA, the storage modulii at room temperature are enhanced by about 100% or more in the case of 30 and 40% ENR‐containing matrices, whereas the enhancement in the case of 20 and 12% ENR‐containing matrices is only 50% that of the pure matrix. It was also observed that the tan δ peak heights of the composites containing 30 and 40% ENR are closer to that of 20% ENR‐containing composite. The probable explanation drawn on the basis of experimental findings of DMA and mechanical analysis is that by blending ENR with DGEBA epoxy it is possible to manufacture jute composites with increased stiffness without sacrificing their ductility. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2800–2807, 2002     

Damping of vinyl acetate–n‐butyl acrylate copolymers

A photopolymerization process at room temperature was devised to copolymerize vinyl acetate (VAc) and n‐butyl acrylate (BA) mainly to prepare rubber‐like damping sheet bearing pressure‐sensitive adhesive property in this study. The investigations using both the differential scanning calorimeter and rheometric dynamic analysis show the existence of two glass transition temperatures for each copolymer. The scanning electron microscopic pictures reveal that the degree of microphase separation increases with increasing annealing time at 70°C. It was suggested that the rubbery domain (formed by the PBA blocks) disperses in the glassy domain (constituted by the PVAc blocks), making an effective damping entity. Excellent damping was observed for the copolymer samples, with the tanδ peak values as high as 1.76–1.80 at a certain temperature range and with tanδ> 0.3 at quite wide temperature ranges. In addition, the copolymers containing more VAc tend to have the higher damping. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1396–1403, 2004     

国内互穿网络结构阻尼涂料的研究进展

在总结了国内聚合物基阻尼涂料的研究基础上,详细综述了互穿网络(IPN)结构、乳液互穿网络(LIPN)结构聚合物基阻尼涂料的种类及研究现状,并展望了聚合物基阻尼涂料研究的发展趋势和前景。     

惯性往复振动机械阻尼值设计的理论研究

建立了双旋转偏重激振的惯性往复振动机械的状态方程,将该状态方程与两驱动电机的状态方程一起组成机电耦合系统的数学模型,对不同阻尼的机电耦合数学模型进行数值求解,得到不同阻尼时系统的瞬态和稳态解.通过综合分析系统阻尼对最大共振振幅、启动时间、稳态功率消耗及阻尼力的影响,提出了惯性往复振动机械阻尼率的合理设计值为0.1左右.