Field observations on the occurrence of new indicators of disinfection efficiency

This paper summarizes studies on the presence of acid-fast and yeast organisms in wastewater and water treatment plants and in surface water. These organisms were found to satisfy three of Bonde's criteria for indicator organisms: presence whenever pathogens are likely to be present; resistance at least equal to that of pathogens; and lack of regrowth in the post-treatment environment. This, plus prior data, indicates that these organisms are at least as acceptable as indicators of disinfection efficiency than the coliform group.     

工业废水中金属元素的测定

工业废水中金属离子对水环境造成污染,并危及人体健康,应准确进行测定.论述了原子吸收分光光度法测定工业废水中金属元素的原理,重点论述了测定Zn的条件、范围、干扰等因素,总结了测定锌的条件及测定结果;实验证明,用原子吸收分光光度法测定工业废水中的Zn元素,可取得较好的结果.     

混合型表面活性剂液膜法处理含酚废水研究

研究了兰－１１３Ｂ＝Ｓｐａｎ－８０－－煤油ＮａＯＨ液膜体系处理苯酚废水的最佳操作工用于对高浓度含酚废水进行处理，实验结果表明，混合型表面活性剂各项指标均较好，除酚效率可达９９％以上，对内相ＮａＯＨ的最佳浓度的确定给出了估算方法。     

Dissolved organic carbon of coal slurry transport water

The qualitative and quantitative occurrence and fate of dissolved organic carbon (DOC) leaching into coal slurry transport water was examined in laboratory-generated coal slurries and wastewaters from the Black Mesa coal slurry pipeline. Laboratory slurries were formulated for both western coals (Wyodak, Montana Rosebud and Black Mesa) and eastern coals (Illinois No. 6 and Pittsburgh No. 8). Sephadex G-25 elution profiles and ultrafiltration studies indicate that the majority of the organic compounds in western coal slurry wastewaters were lower (less than 1000) molecular weight species (62% for Wyodak and 74% for Montana Rosebud). Biochemical Oxygen Demand (BOD) for these particular wastewaters ranged from 50 to 150 mg l⁻¹ as determined through the use of an electrolytic respirometer. Also, there was a concomitant 51–74% reduction in the DOC levels in the wastewaters. This removal was primarily due to the removal of the lower (< 1000) molecular weight compounds by the seed inoculum. There was no evidence for the presence of mutagenic organics in the raw wastewater.     

成形磨削中砂轮修整精度的研究

成形磨削一般采用金刚石笔来修整所需要的砂轮形状，金刚石笔在安装中的位置误差将影响被加工工件的精度，本文对此误差的大小进行了分析。     

真空技术在污水处理中的若干典型应用

介绍了真空技术在污水处理中的几种典型应用，真空结晶法在以分离污水中具有结晶性能的固体溶剂；真空过滤脱水用于初沉池和消化池污泥脱水，真空浮选法通过制造负压条件加速浮选过程；还有真空搅拌、真空脱气等等。这些足以说明真空技术在污水处理乃至环境保护中占有重要的一席之地。     

一种有机硫类絮凝剂DTC的合成及性能评价

讨论了由有机伯胺或仲胺和CS2合成二硫代氨基甲酸盐DTC的反应及副反应,简介了合成工艺。根据红外光谱确认了由三乙烯四胺合成的二硫代氨基甲酸盐（以下简称DTC）的结构。以含原油350 mg/L、含悬浮固体55.1 mg/L,含Fe^2＋10.0 mg/L的模拟污水为实验水样,考察了该DTC的絮凝性能,在40℃、pH=6-7、沉降时间30分钟条件下DTC的适宜加量为20 mg/L,此时污水含油量为9.0 mg/L;使用DTC的适宜pH范围在4-8,pH=6为最佳值,适宜温度范围为10-45℃,温度高于45℃时DTC可发生热分解;DTC的除油效果随污水中Fe^2＋浓度增大而改善。在含油89.1 mg/L、含悬浮固体55.1 mg/L、含Fe^2＋13.2 mg/L的油田污水中,DTC的除油率最高,远高于常用絮凝剂PFS,PAC,CPAM,HPAM和PAM。当污水中不含Fe^2＋时,DTC无絮凝除油效果。讨论了DTC在Fe^2＋参与下的絮凝过程。图5表1参8。     

活性污泥数学模型入流组分测定及应用

阐述了活性污泥1号模型人流组分的分析方法，并用这些方法测定了西安市城市污水水质。实验结果表明测定方法操作简单、准确可靠，能为利用模型进行污水处理厂的设计、模拟及管理提供入流组分分析依据，     

炼油厂废水的最小化

石油炼厂作为用水大户，在水资源逐渐短缺、环境污染日益严重的情况下，实施废水最小化改造具有重要的现实意义。笔者以石油炼厂整个水分配系统年度费用最小为目标函数，提出采用回用、再生回用和再生循环3种措施减少新鲜水用量和废水排放量。利用超结构建模求解所得优化的水分配系统不但要满足各用水过程的需求，而且使排放的废水达标。给出的实例证明，所提出的方法更全面地考虑了废水最小化的机会，且所得结果可行、有效。     

铅锌选矿厂废水回用研究

简述了铅锌选厂废水回用小型试验及工业试验情况，在基本上不改变工艺结构基础上改变药剂制度达到废水回用的目的，使选矿废水回用率达到80％，实现尾矿库废水零排放。