基于DSP的喷油器电磁阀驱动电路设计

根据柴油发动机喷油电磁阀在实际工作中电磁力与电流的关系,设计出一种基于TMS320F28035DSP的柴油机电控喷油电磁阀的驱动电路,以达到提高电磁阀开启与关闭速度、降低能耗和简化电路的目的;驱动电路利用28035DSP内部集成的比较器模块和EPWM模块实现多个电磁阀的驱动,电磁阀高端采用80V高压和24V低压双电源分时驱动技术,电磁阀低端采用电流反馈PWM调制控制技术;试验结果表明:驱动电路实现了12A峰值电流和4A保持电流的电流控制,电流波形满足电磁阀驱动特性,显著提升了电磁阀开启与关闭速度,降低了系统能耗。     

基于机器人运动模型的EKF-SLAM算法改进

针对两轮驱动机器人运动模型定向误差的累积问题,提出改进的三轮驱动机器人运动模型,对EKF-SLAM算法的一致性进行改进;该模型通过对机器人车轮线速度的解耦运算,将机器人运动过程中的旋转角速度提取出来并作为系统的控制输入之一,从而可以直接得到各个控制时间间隔内的机器人姿态角变化,很好地避免了机器人定向误差的累积;最后,基于归一化估计方差的检验标准进行实验,验证了三轮驱动机器人运动模型有效提高了EKF-SLAM算法的一致性。     

传热推动力损耗的温度场熵分析

运用物理场熵的概念,以传热推动力在空间温度场中不可逆损耗,定量表达传热过程不可逆程度,并将温度场熵分析法应用于矩形散热翅片效率的研究,得到温度场熵与翅片长度成正比、与厚度和导热系数成反比的定量关系。并通过与翅片散热效率曲线对比表明,温度场熵不仅反映了传热过程中系统的热力性能和热效,而且揭示了翅片热效变化的内在机理,对优化此类热力系统的设计具有实际应用价值。     

EFFECT OF ALLOY ELEMENTS ON QUASIEQUILIBRIUM MICROSTRUCTURE IN Fe-Mn-Ni-Cr STEELS

The microstructures of Fe-Mn-Ni-Cr steels with medium carbon and the effect of alloy ele-ments on them have been investigated by means of X-ray diffraction quantitative phase ana-lyses,metallography and hardness tests.The volume fraction of martensite in steels quenchedat 1100℃ can be expressed as:f_M~(1100)=162.643-15.482Mn-7.36Ni-4.286(Cr+Mo+V)Based on this expression,the quasi-equilibrium microstructure diagram has been obtained.Itis shown that the effect of Mn on the austenite stability is greater than that of Ni.The equiva-lent [Ni]=2.104Mn+Ni and equivalent [Cr]=Cr+Mo+V.The driving force for martensite transformation at M_s point has been calculated to hedrastically decreased by element Mn.     

QUASI-EQUILIBRIUM MICROSTRUCTURES AND EFFECT OF ALLOY ELEMENTS IN Fe-Mn-Ni-Cr STEELS

本文利用X射线定量相分析及金相观察和硬度测试,考察了中碳Fe-Mn-Ni-Cr钢的组织及合金元素的作用。建立了经1100℃淬火后的马氏体体积分数与合金成分的定量关系式; f_M~(1100)=162.643-15.482Mn-7.36Ni-4.286(Cr+Mo+V)并在此基础上给出了亚平衡组织图。结果表明,Mn稳定奥氏体的作用大于Ni的作用。Ni和Cr当量分别以[Ni]=2.104Mn+Ni,[Cr]=Cr+Mo+V表示。计算了M_S点处的马氏体相变驱动力,指出Mn具有强烈降低相变驱动力的作用。     

650轧机用重型减速机使用实践与分析

本文针对我厂650×3中型轧钢机用主减速机当前的工作条件和轧制负荷情况,该减速机的设计特点、传动布置力学原则、使用维护经验等几个方面进行系统分析,并结合其运动现状和工作情况趋向,以探讨该减速机良好的工作可靠性和长期使用寿命的成因。     

我国木质素油田化学品的发展现状

本文综述了我国木质素类（碱木质素或木质素磺酸盐）油田化学品的最新进展，其中包括钻井液处理剂、油井水泥添加剂、堵水剂、调剖剂、稠油降粘剂和表面活性剂驱油的牺牲剂。目前我国木质素类堵水剂、调剖剂和稠油降粘剂的研究和应用方面已达到或超过世界先进水平，改性木质素磺酸盐的研究也接近国际先进水平，但钻井处理剂和水泥添加剂仅为美国的1／9，许多木质素化学品仍为空白。因此，这些油田化学品仍然是吸引人去研究的课题，期望不久的将来会有较大的进展。     

Utility of stereoscopic displays for indirect-vision driving and robot teleoperation

The effectiveness of an active shutter-glasses stereoscopic display (SD) and a passive polarised SD was evaluated in a live robot-teleoperation task and a simulated indirect-vision driving task in various terrains. Overall, participants completed their tasks significantly faster with the SDs in three-dimensional (3D) mode than with the SDs in the baseline 2D mode. They also navigated more accurately with the SDs in 3D mode. When the effectiveness of the two types of SDs was examined separately, results showed that the active shutter-glasses SD resulted in faster responses and task completion times than the passive polarised SD, though most of the differences failed to reach statistical significance. Perceived workload when interacting with the two SD systems did not differ significantly between the active versus passive display types or between the 3D and 2D modes of operation; however, participants reported more severe discomfort after interacting with the passive polarised SD.     

水声传感阵列指向性与系统传输性能研究

针对浅海水声通信中水汽界面和海底的反射产生多途效应对信号传输的影响,依据水下声传输原理,分析了水声信道中的噪声特点和产生多途效应机理,研究水声信道中声传感器指向性与传输性能关系,探讨水声传感阵列方式在水下通信环境的优势,设计合理的阵元间连接形式、阵列驱动电路和阻抗匹配电路,保证有效的功率耦合效率。经水下试验测试表明:采用一定指向性的声阵列结构,利用单个阵元波束宽度小于10°,构成阵列结构的波束宽度小于30°,并进行一定阻抗匹配,可减小能量损失,有效提高水声通信系统性能。     

Customizable hardware design of fuzzy controllers applied to autonomous car driving

Nowadays, final products often encompass a certain intelligence therein to deal with variation or lack of precision in the sensing input data. This intelligence is usually acquired via the utilization of existing soft techniques, such as artificial neural networks, genetic algorithms and fuzzy control, among others. Thus, it is profitable to have on-the-shelf shell scalable and adaptive hardware designs that implement these soft techniques. This availability allows for an immediate embedding of any of those designs onto final products. This usually entails a reduced time-to-market of the product. Process control is one of the many applications that took advantage of the fuzzy paradigm. In general, controllers are embedded into the controlled device. This paper presents a novel design of a reconfigurable efficient parallel architecture to implement fuzzy controllers on hardware with almost no design effort for final users. The proposed architecture is herein proven suitable for embedding. It is customizable, so it allows the setup and configuration of the controller parameters, and hence its use for any problem application. Two fuzzy controllers that model autonomous car driving are implemented and their cost and performance evaluated.