无端点检测汉语识别算法的实现及改进——动态时间规整和隐马尔可夫统一模型的应用

语音识别算法中，动态时间规整（ＤＴＷ）和隐马尔可夫模型（ＨＭＭ）是最有效的识别算法，并且两者之间有着本质的联系和内在的统一［１］，据此前期工作中，已经建立了ＤＴＷ和ＨＭＭ的统一模型（ＤＨＵＭ）［２、３］。本文对ＤＨＵＭ进行了改进，在ＤＨＵＭ中引进寂静段自环，并根据汉语语音的特点，提出了一种无端点检测的语音识别算法。在识别过程中，该算法无需确定语音信号起止点位置，而是从寂静段开始，直接按帧提取特征（帧长２０ｍｓ，帧间重叠５０％），特征向量由１５阶倒谱系数和帧平均能量组成。实验中，用ＤＨＵＭ实现了该算法，对９９个相似汉语单字的识别测试结果表明：无端点检测的识别正识率为９４．９５％，正识率下降很少，但不作端点检测却降低了算法的复杂程度。为进一步改善识别性能，特征向量采用一种听觉模型特征，识别器具有更好的鲁棒性，识别率会略有提高。     

重金属污染物动态吸附试验及数学模拟

本文采用泥沙动力学中Ｒｏｕｓｅ等人用来研究泥沙浓度沿垂线分布的装置。对泥沙吸附重金属污染物进行了动态模拟。试验分有底泥和无底泥两种情况。研究中发现在Ｒｏｕｓｅ装置的水力、泥沙条件下泥沙吸附重金属污染物达到平衡状态需要６小时以上，由极坐标下的重金属迁移转化数学模型方程，在本文具体试验条件下进行数值求解，计算结果和试验结果合良好，说明数学模型是正确合理的试验是可靠的。计算时依据室内静态试验结果，对动态     

双机械臂协调：以运动学为基础的模型分析与动态补偿控制方法

本文建立了双机械臂协调系统的主从式控制的非结构模型，并针对两臂具有相同特性和不同特性这两种情形作了稳定性分析，提出特性校正的方法，本文还利用内模原理设计出动态补偿器来克服标定约束的不确定性对系统控制品质的影响，最后给出了实验结果。     

Dynamic elastic-plastic behaviour of whipping pipes: experiments and theoretical model

This paper is concerned with the problem of pipe whip, the dynamic response of a high pressure piping system subjected to an end force as the result of a pipe break which releases a jet of fluid from the broken section. Both experimental and theoretical results are presented concerning the dynamic elastic-plastic behaviour of cantilever pipes subjected to a transverse force pulse at the free end. Comparisons between experimental data and theoretical predictions are made for mild-steel pipes with outer diameter-to-thickness ratios of 19.5, 28 and 32. It is demonstrated that, for these geometries, the whipping pipes display three characteristically different responses, viz. elastic, plastic hardening behaviour for thick pipes, elastic, plastic hardening-softening behaviour for moderately thick pipes and elastic, plastic hardening-softening-collapse behaviour for thinner pipes. The experimental data taken from a series of high-speed films are compared with the predictions of the instantaneous shapes of the whipping pipes derived from both a rigid, perfectly-plastic, large deflection, dynamic beam model and a more comprehensive model which incorporates the effects of elasticity and plastic hardening and softening, the details of which are presented in the paper.     

柔性机械手系统的动力学方程

本文应用动力学普遍方程,导出了单链柔性机械手系统的动力学方程;并以递推形式分析该方程的求解过程,递推的每一步只须解低维的方程组,因而便于计算.还讨论了多链柔性树状系统动力学方程的求解方案,它与单链柔性机械手系统具有相似性,便于编制程序.     

动态交通分配中一类转换率系统的稳定性

在假设交通很拥挤同时交通的转换率与路径费用成正比的前提下，构建了一个动态的转换率模型．为了获取转换率系统的全局渐近稳定，提出了一个普遍适用的Lyapunov函数方法，与此同时通过线性矩阵不等式方法，得到了保证转换率系统全局渐近稳定的充分条件．     

动态矩阵控制系统稳定域的根轨迹分析

本文使用根轨迹技术从理论上分析了纯滞后工业过程参数变化对系统稳定性的影响,得到了一个与设计参数有关的稳定域,从而为设计参数自动整定提供了参考。     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

万安水利枢纽底孔坝段中隔墙流激振动响应分析

 研究了万安水利枢纽底孔坝段中隔墙在水流脉动壁压作用下的结构随机振动问题，进行了一种泄流工况下的隔墙结构流激振动响应统计量的理论计算，模拟计算了隔墙－水流－基础耦合系统固有频率对流激振动响应的影响，并对水流脉动壁压随机荷载作用下的结构动力可靠度进行了理论分析。     

动态过程监视的最佳显示方式研究

文中讨论了人机界面的视学工效问题，通过实验评价了用于动态过程监视与控制的三种ＣＲＴ显示方式的工效，并由此得出人类视学系统反应对图形方式更优于对数字方式，图形与数字的复合方式。