Patterns of discrimination in hiring job applicants with disabilities: The role of disability type, job complexity, and public contact.

Objective: To evaluate the effects of disability type, job complexity, and public contact on hiring decisions. Design and Participants: An Americans With Disabilities Act (ADA; 1990) fact sheet and matched resumes with vocational and medical histories including chronic mental illness, developmental disability, closed head injury, and back injury were provided to 295 undergraduate business-related majors, who rated the applicants' suitability for 2 job positions and work shifts. Results: Findings indicated disparities in ratings of employability as a function of disability type. Paired comparisons yielded complementary findings, with effects of disability type and Disability Type × Job Complexity, but no effects of public contact. Conclusions: Stereotyping and discrimination in employment decisions apparently persist, more than 10 years after the ADA. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

桐柏抽水蓄能电站斜井开挖技术

桐柏抽水蓄能电站斜井扩挖在总结以往类似工程施工经验的基础上，对提升系统、信号控制系统及扩挖钻爆等工艺进行了优化，开创了斜井施工的新局面。为我国抽水蓄能电站大洞径、长斜井开挖积累了宝贵的经验。     

油管电热清防蜡技术在强水敏油田的应用

江苏油田的庄 2、韦 2油田属强水敏油田 ,采用热 (水 )洗油井和化学清防蜡效果较差 ,两油田每年因洗井造成地层污染影响的产量损失在 5 0 0 0t以上 ,约占油田产量的 4 5 %。根据集肤效应 ,采用油管电热清蜡技术 ,在含水小于 6 0 %、井斜小于 4 0°的油井上可正常使用 ,一般通电加热 4 0～ 80min后 ,油井井口温度能达到 5 0℃左右 ,最高可达到 6 5℃以上 ,连续加热 5～ 6h即可达到清蜡目的 ,电热清蜡为周期 6 0～ 90d。影响电热清蜡主要指标因素是油井的产液量 ,产液量越小 ,所需要的加热电流和加热电压也越小 ,井口温度达到最高值越低 ,清蜡效果越差。试验的 7口井平均年度投入产出比达到 1∶5 ,经济效益和社会效益十分明显。     

我国内螺纹铜管的生产技术与发展方向

本文论述了我国内螺纹铜管业生产、工艺、产品技术条件、齿型及市场现状 ,提出了内螺纹铜管的研发方向。     

Simulating Experiment for Temperature Field of Frozen Subgrade Using Regulation Tubes

The main factors that influence the temperature field of frozen subgrade were analyzed.The experimental equipment for simulating frozen subgrade was built up,and the declining regulating tubes were placed at the foot of the embankment. By means of this equipment two simulating experiments of controlling temperature filed of frozen subgrade were carried out in the laboratory. One method is to collect natural cold energy, and the other one is to collect natural cold energy ccompanied by artificial refrigeration simultaneously. The result indicates that the latter is an effective method for maintaining the stability of the frozen subgrade.     

点状屏彩色显示管校正透镜优化设计

本文在条状屏彩色显象管校正透镜设计的基础上，提出了蹼状屏彩色显示管校正透镜的优化设计方法并给出了设计实例，通过计算机模拟电子束轨迹和光线追迹，分析了校正透镜面型修正程序的精度。     

论BFe30—1—1冷凝管生产工艺及其改进的途径

论述了ＢＥｅ３０－１－１冷凝管生产工艺的优点及主要问题，对现行工艺提出了改进方案。     

回顶法灌注混凝土浆成桩工艺

探讨了回顶法灌注混凝土浆的成桩工艺，分析了影响混凝土浆灌注质量的主要因素，并给出了相应的技术参数和措施。     

[NZP]陶瓷零膨胀性能的设计

研究了「ＮＺＰ」材料的零膨胀性能，并尝试对零膨胀的「ＮＺＰ」陶瓷作了设计，从晶体结构、原子复合、各向异性、显微结构和复合材料等方面提出了设计思路。     

����������Ͳ�¶ȷֲ�����

凝析气井井筒温度分布是进行气井节点分析和动态分析必不可少的参数。根据传热学原理推出了凝析气井井筒温度分布计算公式，研究了温度计算基础数据求取方法，分析了产气量、产水量、井深及油管直径对井口温度的影响规律。对某一井深为５４００ｍ的凝析气井进行了计算，该气井气油比为３０００，含２３％的Ｈ２Ｓ和４％的Ｎ２；地层温度为１３４℃。计算结果表明：井口实测温度与计算温度的相对误差为０２％～３８％，符合工程精度。气井温度随井深不呈线性分布；气井井口温度随产量、井深增加而增加，随油管直径减少而减少；该公式同时适用于干气井、湿气井和凝析气井的温度分布计算，计算精度符合工程精度要求。