CO2体积分数对燃煤细颗粒物在水汽环境中凝结长大的影响

为研究燃煤烟气中CO₂体积分数对细颗粒物在水汽环境中凝结长大效果的影响,建立了计算模型并搭建了实验平台,分别从理论计算和实验研究两方面探讨了CO₂体积分数对细颗粒物凝结长大效果的影响。结果表明:随着CO₂体积分数升高,混合烟气的热、质扩散系数均降低,生长管内平均过饱和度增加,细颗粒物长大效果明显;管壁温度越高,随着CO₂体积分数的提高,细颗粒物粒径越大。     

协同处置系统优化节能降耗的生产实践

公司协同处置项目植入热盘炉后,烧成系统运行稳定性变差,热耗上升,处置废弃物时标煤耗最高上升4kg/t.cl以上。对窑尾烟室缩口,C4下料管及窑尾分解炉燃料喷入点进行综合诊断分析,实施优化改造措施,分解炉内煤粉燃烧环境得到改善,系统通风阻力降低,标煤耗降低到103 kg/t.cl以下,与热盘炉植入前相当。     

家用空调器管路件根部裂漏失效分析

针对家用空调器售后出现管路件根部裂漏问题,对故障件返厂,从工艺设计、金相实验、故障复现等几个方面着手分析,确认根部裂漏原因为设计应力,在空调器生产、运输、运行过程中管路件根部出现裂漏,最终通过对管路件结构进行更改,加强管路件强度,消除应力,未再发生此类故障。     

多元羧酸与指甲醌染料交联染棉的结构及性能

为了提高天然染料对棉纤维的染色固色性能,以聚马来酸（PMA）和柠檬酸（CA）为交联剂应用于天然染料指甲醌对棉织物的交联染色。采用FTIR、SEM和XRD分析了染色前后棉织物的表面形态及结构,探讨了酯交联对棉织物性能的影响以及多元羧酸复配交联染色机理。结果表明,染色前后棉织物表面差别不大,各纤维间不粘连;直接染色后的棉纤维表面变化不明显,仅有少量染料附着,而交联染色后的棉纤维表面负载较多的染料导致其粗糙度增加,酯化反应主要发生在纤维的非晶态区。与直接染色棉织物相比,交联染色棉织物的染色深度（K/S）和上染率分别提高了88%和38%;染品的绿光、黄光增加,颜色饱和度提高;摩擦色牢度提高了1~2级;耐洗色牢度提高了1~2级;交联染色后棉织物的折皱回复角（WRA）提高了约60%,UPF值达到了50+,具有优异的抗紫外性能。     

Telomere Length in Metaphase Chromosomes of Human Triploid Zygotes

The human lifespan is strongly influenced by telomere length (TL) which is defined in a zygote—when two highly specialised haploid cells form a new diploid organism. Although TL is a variable parameter, it fluctuates in a limited range. We aimed to establish the determining factors of TL in chromosomes of maternal and paternal origin in human triploid zygotes. Using Q-FISH, we examined TL in the metaphase chromosomes of 28 human triploid zygotes obtained from 22 couples. The chromosomes’ parental origin was identified immunocytochemically through weak DNA methylation and strong hydroxymethylation in the sperm-derived (paternal) chromosomes versus strong DNA methylation and weak hydroxymethylation in the oocyte-derived (maternal) ones. In 24 zygotes, one maternal and two paternal chromosome sets were identified, while the four remaining zygotes contained one paternal and two maternal sets. For each zygote, we compared mean relative TLs between parental chromosomes, identifying a significant difference in favour of the paternal chromosomes, which attests to a certain “imprinting” of these regions. Mean relative TLs in paternal or maternal chromosomes did not correlate with the respective parent’s age. Similarly, no correlation was observed between the mean relative TL and sperm quality parameters: concentration, progressive motility and normal morphology. Based on the comparison of TLs in chromosomes inherited from a single individual’s gametes with those in chromosomes inherited from different individuals’ gametes, we compared intraindividual (intercellular) and interindividual variability, obtaining significance in favour of the latter and thus validating the role of heredity in determining TL in zygotes. A comparison of the interchromatid TL differences across the chromosomes from sets of different parental origin with those from PHA-stimulated lymphocytes showed an absence of a significant difference between the maternal and paternal sets but a significant excess over the lymphocytes. Therefore, interchromatid TL differences are more pronounced in zygotes than in lymphocytes. To summarise, TL in human zygotes is determined both by heredity and parental origin; the input of other factors is possible within the individual’s reaction norm.     

Genome-Wide Analysis of the Late Embryogenesis Abundant (LEA) and Abscisic Acid-, Stress-, and Ripening-Induced (ASR) Gene Superfamily from Canavalia rosea and Their Roles in Salinity/Alkaline and Drought Tolerance

Canavalia rosea (bay bean), distributing in coastal areas or islands in tropical and subtropical regions, is an extremophile halophyte with good adaptability to seawater and drought. Late embryogenesis abundant (LEA) proteins typically accumulate in response to various abiotic stresses, including dehydration, salinity, high temperature, and cold, or during the late stage of seed development. Abscisic acid-, stress-, and ripening-induced (ASR) genes are stress and developmentally regulated plant-specific genes. In this study, we reported the first comprehensive survey of the LEA and ASR gene superfamily in C. rosea. A total of 84 CrLEAs and three CrASRs were identified in C. rosea and classified into nine groups. All CrLEAs and CrASRs harbored the conserved motif for their family proteins. Our results revealed that the CrLEA genes were widely distributed in different chromosomes, and all of the CrLEA/CrASR genes showed wide expression features in different tissues in C. rosea plants. Additionally, we introduced 10 genes from different groups into yeast to assess the functions of the CrLEAs/CrASRs. These results contribute to our understanding of LEA/ASR genes from halophytes and provide robust candidate genes for functional investigations in plant species adapted to extreme environments.     

A Strategy of Liquid-Grafted Slippery Sponges with Simultaneously Enhanced Absorption and Desorption Performances for Crude Oil Spill Remediation

Crude oil spill accidents pose a worldwide environmental threat. Oleophilic and hydrophobic absorbents that can selectively absorb oil from water have shown promising application potential in oil spill remediation. Simultaneous optimization of the absorption and desorption speed of absorbents towards oil is highly desirable for their recyclable usage, but remains a great challenge, because these two properties are generally conflicting. Here, a facile and ingenious strategy is proposed to tackle the above challenge via surface modification of porous sponges with highly flexible linear polydimethylsiloxane (LPDMS) brushes. The LPDMS brushes feature liquid-like properties at room temperature owing to its extremely low glass transition temperature, and act as a covalently-grafted lubrication layer throughout the 3D network channels of the sponge, which can minimize contact angle hysteresis and reduce friction between oil and sponge channel. Compared to the prevalent cross-linked polydimethylsiloxane (CPDMS) modification strategy, sponges modified with LPDMS brushes not only shows significantly enhanced absorption speed, but also exhibits superior desorption dynamics towards viscous crude oils. The design strategy of slippery sponges with liquid-like molecules may open a new avenue for developing advanced absorbents with simultaneously enhanced absorption and desorption performances for liquid separation and purification applications.     

Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.     

Preparation and mechanical characteristics of fine-woven cloth and punctured felt preform Cf/C-SiC-ZrC composite

A 3D architecture carbon fiber preform, specifically fine-woven cloth and punctured felt preform, is used to manufacture a novel advanced C_f/C-SiC-ZrC composite. The composite matrix is produced by chemical vapor infiltration (CVI) plus precursor infiltration and pyrolysis (PIP) process and finalized by using a chemical vapor deposition (CVD) of SiC coating to make the final density of the material reach 1.95 g/cm³. The organic precursors of SiC and ZrC have a weight ratio of 4:1 in a xylene solute. The composite mechanical properties, such as tensile, compression, bending, shear, and Z-direction load bearing, are introduced under analysis to find possible applications for the composite. What is more, scanning electron microscope (SEM) images are employed to illustrate the failure behavior of the ceramic composite. The results showed that the punctured filament tows will be beneficial, not only for the composite to withstand compression force up to 308.6 MPa and shear strength to 18.14 MPa but also for the alternatively stacked weave piles and short fiber layers to support the punctured bundles, as well as to hold the composite structure under mechanical forces from different orientations, which is believed to reinforce the ceramic matrix for some high pressure and severe ablation applications.     

能源高质量发展下中国电力供需格局演变趋势

为应对气候变化,世界各国都在加快能源转型,习近平总书记提出了“四个革命、一个合作”能源安全新战略和“碳达峰、碳中和”愿景,要求全力推动能源高质量发展,这将对中国电力供需格局产生深远影响。首先,提炼能源高质量发展的内涵、特征;其次,从消费侧、供给侧、技术、体制等角度研判能源高质量发展下电力行业的转型发展方向;最后,通过构建多区域“能源-经济-电力”分析预测模型体系,从电力需求、电力供应、跨区电力流、电力系统形态、电力市场交易等方面研究中国中长期电力供需格局的演变特征。