焦作煤田大煤顶分层沿空留巷合理支护形式分析

文章通过对焦作煤田大煤顶分层沿空留巷大量观测资料的分析,闸明在大煤既定的围岩特征和留巷所采用的支护方式条件下,“支驾——围岩”这一对相互作用的力学力系,在采场支承压力作用下趋向平衡时所呈现的矿压规律。从而分析留巷所采用的梯形“工”字钢支架,巷内架设抬棚的支护方式的合理性。     

Numerical analyses of high‐beta spherical tokamaks with varied elongation

The effect of plasma elongation on the second‐stable spherical tokamak (ST) was numerically studied using the experimentally measured pressure and current profiles of ultrahigh‐beta STs. The maximum beta of ST over 50% was obtained in the TS‐3 ST/CT experiment by applying an external toroidal field to an FRC. It was found that the marginal beta for the ballooning instability increased with the plasma elongation κ of ST. The elongated STs with κ > 2 have the magnetic shear (S)–pressure gradient (α) profiles located in the second‐stable regime for the ballooning mode and the stability margin increased with κ. The close relation between the absolute minimum‐B profile and the second stability was documented. The effect of elongation on maximum beta was observed to saturate when κ exceed 3, indicating that the optimized elongation for high‐beta STs is located around 2 < κ < 3. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(4): 1–6, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20132     

Fast‐scale bifurcation in power‐factor‐correction buck‐boost converters and effects of incompatible periodicities

In this paper, we derive the discrete‐time model for the power‐factor‐correction (PFC) buck‐boost converter in terms of a stroboscopic switching map. Fast‐scale instability is analysed through a fold diagram, which exposes the periodicity of the operation as well as the locations of the critical phase angles of the line voltage at which instability begins to occur along a half‐line cycle. The asymmetrical locations of the critical phase angles along a half‐line cycle is explained in terms of ‘under‐developed’ bifurcation. Border collision bifurcations are observed and analysed in detail. Copyright © 2006 John Wiley & Sons, Ltd.     

Development of ultra light magnesium-lithium alloys

Magnesium-lithium alloys are among the lowest density metallic materials. Addition of lithium, with a relative density of 0·53, in magnesium reduces the density of the alloy significantly. Furthermore, addition of nearly 11 wt.% lithium converts hexagonal close packed structure of pure magnesium to a body centered cubic lattice, markedly improving formability of the alloy. The development of these alloys, however, had been hampered due to the high reactivity of lithium and magnesium in the molten state and also, due to poor creep resistance and instability of mechanical properties at room temperature. In an attempt to indigenize these ultra light alloys for possible applications in Indian satellite programme, detailed research work was initiated in DMRL. The difficulties associated with producing sound cast ingots have been overcome by controlling melting and casting parameters of these alloys. Extensive work has been done on structure-property correlation of alloys with varying lithium content and minor alloying additions. Based on these work, advanced magnesium-lithium alloys have been developed with improved tensile properties, room temperature stability and creep resistance. Wrought products (plates/sheets) of magnesium-lithium alloy have been supplied to ISAC, Bangalore and are being used in their INSAT-2 programme. This paper describes the systematic studies carried out in the laboratory to indigenize these ultra light alloys.     

Instability due to Viscosity Stratification Downstream of a Centerline Injector

A common injector geometry upstream of a static mixer is the centerline injector. A flow instability can arise due to viscosity differences between the injected core‐flow and the outer co‐flow. This instability can adversely affect the effectiveness of the mixing operation. An experimental investigation of miscible viscosity‐stratified flow in a circular geometry was performed using Laser Induced Fluorescence (LIF) and Particle Image Velocimetry (PIV). The experimental results for the stable region agree with the analytical results. The unstable region exhibits different modes depending on the viscosity ratio, volume flux ratio, and Reynolds number. The modes include wavy core‐flow with fissures and wavy core‐flow with core breakup. The time‐averaged experiment velocity profiles for the unstable core indicate a broadening of the jet at the centerline, which is consistent with the LIF visualization.     

爆破作业中的灾害控制

系统阐述了工程爆破中各种灾害产生的原因,根据实际情况提出了相应的控制措施。     

Modeling study of migration-driven lateral instability in autocatalytic systems

The lateral stability of reaction fronts in simple autocatalytic models with the components carrying various charges is investigated when the system is exposed to an inhomogeneous electric field parallel to the direction of propagation. The enhanced migrational flux of the reactant destabilizes the planar front giving rise to a cellular structure because the electric field strength is greater on the reactant side of the reaction front. The onset of instability depends not only on the charge difference between the reactant and the autocatalyst but also on the variation of specific conductance in the course of the reaction, which results in a difference in electric field strength on the opposite sides of the reaction front.     

Plastic instability in dual-pressure tube-hydroforming process

The tube-hydroforming process has become an indispensable manufacturing technique in recent years. Successful tube hydroforming requires bulging to take place without causing any type of instability such as bursting, wrinkling or buckling. The dual-pressure tube-hydroforming process was introduced to achieve a favorable tri-axial stress state in the deformation process. In this paper, the effect of applying counter pressure on plastic instability of thin-walled tubes is analyzed. It is concluded that in dual-pressure tube hydroforming, the onset of plastic instability is delayed and the ductility of the metal is increased.     

水利工程排涝减灾效益分析与计算

在分析涝灾成因特点基础上对涝灾进行了重新定义，在研究涝灾损失及 排涝效益时引入了临界降雨量的概念，从而奠定了水利工程排涝减灾效益分析与计算的理论基础，并给了效益计算的一般计算模型。     

Preliminary Study in Spatial Data Warehouse of Flood Control and Disaster Mitigation in Yangtze River Basin

1　ＳｐａｔｉａｌＤａｔａＷａｒｅｈｏｕｓｅ1.1　ＦｕｎｃｔｉｏｎｓｏｆＳｐａｔｉａｌＤａｔａＷａｒｅｈｏｕｓｅＩｎｏｒｄｅｒｔｏｍｅｅｔｔｈｅｒｅｑｕｉｒｅｍｅｎｔｔｏｓｐａｔｉａｌｄａｔａ ,ｔｈｅｄａｔａｄｅｒｉｖｅｄｆｒｏｍｄｉｆｆｅｒｅｎｔｓｕｂｊｅｃｔｓａｒｅｇｒｏｕｐｅｄｉｎｕｎｉｆｏｒｍｆｏｒｍａｔｓａｃｃｏｒｄｉｎｇｔｏｔｈｅｔｈｅｍｅｓｔｈａｔｕｓｅｒｓｃａｒｅａｂｏｕｔ.Ｔｈｅｓｐｅｃｉａｌｍｏｄｅｌｓａｒｅｅｓｔａｂｌｉｓｈｅｄｔｏｐｒｏｃｅｓｓｔｈｅｄａｔａｉｎｔｈｅｖｉｅ…