金属蒸气法制备聚合物固载Pd－Cu双金属原子簇

为了不使用任何还原剂而获得聚合物固载高分散零价双金属加氢催化剂，利用金属蒸气法制备了３种不同Ｐｄ／Ｃｕ质量比的聚合物固载双金属原子簇。透射电镜（ＴＥＭ）和Ｘ衍射（ＸＲＤ）测定表明，Ｐｄ－Ｃｕ原子簇粒度很小，平均直径小于３．０ｎｍ。Ｘ射线光电子能谱（ＸＰＳ）表明，Ｐｄ和Ｃｕ均为零价态。Ｐｄ－Ｃｕ原子簇在异丙叉加氢反应中具有很高的活性和选择性。这些结果提供了令人信服的证据，即金属蒸气法可用于在聚合物孔穴内直接而温和地置入小的零价金属原子簇，而且这样制备的聚合物固载金属原子簇很适合于催化应用。     

Studies on the interactions of metal oxides and Na2 SO4 at 1100 and 1200 K in oxygen

The interaction of different metal oxides such as Co₃O₄, NiO, Al₂O₃, Cr₂O₃, Fe₂O₃ and SiO₂ with Na₂SO₄ at a temperature of 1100 and 1200 K in flowing oxygen has been studied. The thermogravimetric studies for each system were carried out as a function of Na₂SO₄ in the mixture. The presence of different constituents in the reaction products were identified by X-ray diffraction analysis and the morphologies of the reaction products were characterized using metallography and scanning electron microscopy (SEM). The formation of products was also investigated by thermodynamic computation of free energies of the reactions and the study of relevant equilibrium phase diagrams. The soluble species in the aqueous solutions of the reaction products were determined quantitatively using atomic absorption spectrophotometry. The high temperature interaction products usually contain a 3-phase structure namely, Na₂O·M₂O _x , M₂O _x and metal sulphide and/or metal sulphate. The formation of Na₂O·M₂O _x depends upon the solid state solubility of metal oxide in the molten salt at high temperatures. Under limited solubility conditions Na₂O·M₂O _x is invariably formed, but as soon as this condition is relaxed the oxide. M₂O _x , precipitates and forms a separate phase.     

Recrystallization/precipitation behaviour in microalloyed steels

Microalloyed high-strength low-alloy (HSLA) steels contain additions of Nb, V, Ti, or in combination, in amounts of 0.01 to 0.1 weight percent to improve mechanical properties, which are strongly dependent on the thermomechanical interaction taking place in the course of rolling mill processes. The recrystallizatian of hat-twisted austenite has been investigated in a cylindrical specimen (f 6×50 mm) machined from hat rolled plates of 0,052 wt % Niobium microalloyed steel. Continuous and interrupted torsion test were carried out in the temperature range 1123 K to 1173 K after a solution treatment of 1.5 minutes at 1423 K and torque-twist data were analysed. The various methods were discussed for obtaining results from torsion tests. The effect of precipitation kinetics was appreciated by way of connection t_p/t_p(red), where t_p is the experimental measured time for the peak stress and t_p(red) is the newly defined reduced time. The softening ratio X and time t_0.05R for start of static recrystallization were established.

The correlation between precipitation and recrystallization is presented as a graphs for chosen requirements (temperature of austenitization, carbon and niobium content and strain rate). If temperature goes below 850°C, the restoration processes are hardly suppressed, both are limited by diffusion and Nb(CN) precipitation, which are extended dynamically in the range of strains rates 10⁻² to 1 s⁻¹.

In the present paper, an attempt is made to derive the PRTT diagram and to define all mathematical equations for describing recrystallization times t_0.05R, t_0.5R, t_0.95R and t_0.05P for the start of precipitation. In real metal forming processes such as the hot rolling of plates or strips the knowledge of these parameters and results is extremely important for the the correct microstructure and sheet quality to be obtained.     

新疆重质混合原油研制高等级道路沥青

对利用新疆重质混合原油生产的减压渣油作为基质沥青制备高等级道路沥青进行了研究。考察了低硫石蜡基原油（A）和含硫环烷-中间基原油（B）的掺炼比对基质沥青四组分组成的影响，减压渣油软化点与基质沥青四组分组成的关系，以及添加剂对改进沥青性质的作用。由此得出原油（B）的合适掺炼量，减压渣油软化点的控制范围和优化的生产工艺条件，调合出了符合GB／T18150—2000和JTGF40—2004要求的高等级道路沥青。     

Measurement of the Metal Surface Acidity/Electronegativity of Pt(110)

In previous work, it has been found that a hydrogen-covered Pt(110) surface is acidic, but quantification of the acidity has not yet been done. In this paper a spectroscopic method is developed to measure the acidity of a metal surface for the first time. The technique involves measuring the intensity of the N–H stretch from the C₅H₄XNH⁺ that forms when hydrogen coadsorbs with pyridine, 2-fluoropyridine and 3-fluoropyridine. The Bethe approximation is then used to estimate the metal surface acidity/electronegativity (MSAEL). The proton affinity/MSAEL of Pt(110) has been determined to be 907 ± 4 kJ/mol at high coverage. This is the first time the MSAEL has been measured on a metal surface. Implications for fuel cell catalysis are discussed.     

锌基合金模具的应用及探讨

本文分析了锌基合金模具制造及使用过程中容易出现热裂、翘曲、收缩的问题，并提出了解决这些问题的措施。     

�غ���׹ܿ���ǿ�ȼ��㼰�ֳ�Ӧ��

对于套管挤毁问题较为严重的油气水井，采用非API标准的特厚壁套管来提高其抗挤强度，是今后预防套管挤毁的重要发展方向。目前，特厚壁套管的抗挤强度计算和尺寸系列尚未形成工业标准，文章提出特厚壁套管的抗挤强度计算方法和尺寸系列，供设计者和厂家参考。API/ISO套管挤毁工作组曾对本文公式进行了测评，结果曼示具有较高的计算精度。大量计算表明，特厚壁套管的抗挤强度大大提高，约为加厚前原套管抗挤强度的1．5～4倍，甚至6倍。最后还介绍了特厚壁套管在中原油田的现场应用情况。     

W-Ni-Cu高比重合金注射成形烧结收缩及性能的研究

研究了W-Ni-Cu高比重合金注射成形工艺过程收缩率和性能。比较了模具尺寸、注射坯尺寸、烧结坯尺寸，及烧结阶段各方向收缩率的关系，发现实际收缩与理论预测收缩率较为一致，但在厚度方向存在与其他方向收缩不一致的情形，这与由重力作用产生的塑料流动有关；还探讨了烧结坯密度与烧结条件的关系，测定了烧结坯的力学性能及断口形貌、金相组织，烧结坯在1400℃，90min烧结达到了99％的相对密度，断裂强度600MPa以上。