Flow field in air-sparged hydrocyclone

ＦＬＯＷＦＩＥＬＤＩＮＡＩＲ－ＳＰＡＲＧＥＤＨＹＤＲＯＣＹＣＬＯＮＥＣｈｕ，Ｌｉａｎｇｙｉｎ；Ｌｕｏ，Ｑｉａｎ（ＭｉｎｅｒａｌＥｎｇｉｎｅｅｒｉｎｇＤｅｐａｒｔｍｅｎｔ，Ｐ．Ｏ．Ｂｏｘ１３９ＮｏｒｔｈｅａｓｔｅｒｎＵｎｉｖｅｒｓｉｔｙ，Ｓｈｅｎｙａｎ...     

离心机进料技术的改进

通过对离心机进料管线的改进，采用套管式进料管线，浆料泵直接进料的方式，稳定了离心机的电流，防止PVC树脂堵塞管线，达到增强离心机脱水能力的目的。     

Horizontal wells and steam-assisted gravity drainage

Petroleum can be produced more efficiently using horizontal wells instead of conventional wells. For a typical 16 hectare well spacing, the pressure drawdown is as small as one-fiftieth of that for conventional wells. In some cases, where coning is a problem in conventional production, horizontal wells allow operation with much less coproduction of the displacing fluid. In the thermal recovery of bitumen and heavy oils, the Steam-Assisted Gravity Drainage process with horizontal production wells allows the systematic sweeping of the reservoir with economic production rates and without steam bypass. This paper described and reviews the application of horizontal wells to the production of heavy crude oils and bitumen by both non-thermal and thermal methods.     

MOBILIZATION OF SLUDGE IN HORIZONTAL CYLINDRICAL TANKS WITH SUBMERGED NOZZLES

Over 378,000 m³ (100 million gal) of radioactive waste is being stored in hundreds of tanks at several U.S. Department of Energy (DOE) sites. The environment within the tanks is highly radioactive and chemically harsh. The waste typically consists of a heterogeneous sludge layer covered by a layer of supernatant. A few of the tanks have leaked to the environment, while others are corroding. Removing the waste from the tanks and processing it to a stable final form are desired to prevent any additional contamination of the environment. The tanks vary in size and geometric shape and do not have systems for removing the sludge waste.

Mobilization and mixing studies were conducted with a surrogate sludge (e.g., kaolin clay) using submerged jets in two sizes of horizontal tanks with nominal capacities of 0.87 m³ (230 gal) and 95 m³ (25,000 gal). Mobilization efficiencies and mixing times were determined for single and bidirectional jets in both tanks with the discharge nozzles positioned at various locations in the tanks. Approximately 80% of the surrogate sludge was mobilized in the 95-m³ tank using a fixed bidirectional jet (inside diameter = 0.035 m) and a jet velocity of 6.4m/s (21 ft/s). The effective cleaning length, which is defined as the distance between the jet and the edge of the remaining sludge bank, was approximately 3.2 m (10 ft) on each side of the bidirectional jet.     

挡水结构水下爆炸作用的离心模型试验

水下爆炸包括冲击波和气泡脉动,两者能量相当,均会对结构产生毁伤作用。水下爆炸载荷试验唯有在离心机内才满足相似关系,设计试验时宜在离心机负载范围内尽可能增加模型尺寸以减小边界效应。针对挡水结构,在离心机内布置压力传感器、高速摄像机、加速度计及应变片测试了冲击波、气泡脉动载荷及结构产生的动力响应。通过试验对比了水下爆炸和空爆产生的载荷,分析其引起结构动力响应的差异。对于水下爆炸,重力加速度的增加引起气泡脉动冲量的减小,而气泡脉动产生的峰值应变基本与气泡冲量呈线性关系,因而模拟气泡脉动对结构作用时应考虑重力效应。     

双质体振动机的应用——浅谈解决橡胶后处理装置地基振动的方法

以降低合成橡胶生产厂后处理装置各种振动机造成的地基振动为目的,对双质体振动机的隔振效能进行了定量分析。通过生产实践,总结了单质体振动机、非平衡型双质体振动机和对称平衡型双质体振动机的优缺点,给出了后者的设计计算数据。经综合分析和生产考核,认为采用对称平衡型双质体振动机是降低地基振、降低噪音、延长振动机的运转周期和使用寿命的最佳方法。     

水平带式真空过滤机的选择与应用

本文介绍了水平带式真空过滤机的特点和选用，特别讨论了往复盘水平带式真空过滤机的工作原理及主要特点，提出了应用实例及其发展方向。     

WG-800离心机异常振动问题的解决

分析了引起WG-800离心机异常振动的原因,采用自制的实心橡胶减震器并采取一些预防振动措施后,离心机的振幅在正常范围之内,取得了较好的效果。     

基于MEMS声传感器的圆柱壳体振动陀螺振型检测技术

振动陀螺谐振子振型一般采用激光进行非接触式测量,这种方法存在设备成本高、操作复杂、效率低等问题,因此,提出了一种基于MEMS声传感器的圆柱壳体振动陀螺谐振子振型测试方法。该方法利用体积小,指向性高的MEMS声传感器对谐振子振动声场进行高分辨率测量,获得精确的谐振子振动分布情况,建立了谐振子声波测试实验系统,进行了测试实验,并与激光测振仪的测量结果进行比对。实验结果表明,该测试系统具有较高的振型测量精度。这种测试方法成本低,操作简便,测量精度高,可以实现谐振子振型的高精度快速测量,为后续的谐振子修形及陀螺控制提供重要基础。     

Free convection heat transfer over a horizontal plate at low prandtl number

Boundary layer equations for free convection heat transfer along a semi-infinite horizontal plate are derived by giving more importance to the energy equation. The equations are obtained for low Prandtl number and two separate polynomials are used to approximate the temperature and velocity profiles in these regions. The rate of heat transfer is compared with the available analytical and numerical results based on conventional boundary layer equations.