双环戊二烯改性不饱和聚酯树脂研究进展

较详细地介绍了双环戊二烯改性不饱和聚酯树脂的机理、合成路线(初始法、半酯化法、酸酐法、后期法、封端法和水解法)及国内外双环戊二烯改性不饱和聚酯树脂在气干性、低苯乙烯挥发、低收缩性与力学性能方面的研究进展,提出了今后的研究方向。     

dc Electrical Degradation of Perovskite-Type Titanates: I, Ceramics

The rate of the resistance degradation of doped SrTiO₃ ceramics is investigated as a function of various external and material parameters. The effects of the mutually interrelated parameters dc voltage, dc electric field, and thickness of the dielectric are described by power laws. Electron microscopic potential contrast studies show a Maxwell-Wagner polarization leading to a concentration of the electric field at the grain boundaries during the degradation. Based on this finding, the voltage step per grain boundary, ΔΘ_gb, is introduced as a rate-determining parameter which allows an explanation of the influence of the grain size on the degradation rate as well as the difference in the power laws for ceramic and single-crystal samples.     

膨胀阻燃聚丙烯复合体系的研究

采用聚磷酸铵（APP）和Deflam（敌火龙）分别对聚丙烯（PP）进行了填充改性，研究了两者对PP力学性能、阻燃性能、结晶性能的影响。结果表明：在PP中分别加入APP和Deflam，都可改善PP的阻燃性能，并且添加后者比添加前者对PP的阻燃效果要好。在阻燃性能改善的同时，复合体系的弯曲模量和弹性模量明显提高，但拉伸强度和冲击强度降低。APP和Deflam在PP中都具有成核剂作用，可使PP的结晶过程在较高温度下进行，但Deflam对PP的成核效果不如APP。     

Preparation and electrical conductivity of polyethers/WS2 layered nanocomposites

Utilizing the solvothermal synthesis technique, lithium intercalated tungsten disulfide Li_xWS₂ with x > 1 was obtained, which was allowed to react with water to the formation of single-molecule-layer suspension of tungsten disulfide. The layered nanocomposites PEG, PEO/WS₂, intercalating poly(ethylene glycol) (PEG, MW ≈ 1 × 10³, 6 × 10³, 1 × 10⁴) and poly(ethylene oxide) (PEO, MW ≈ 3 × 10⁵) into the tungsten disulfide host galleries, were prepared using the improved exfoliation-adsorption technique. It was revealed that the intercalated polymers within the host galleries are in a double-layer arrangement with an interlayer expansion of about 9 Å. Despite high conductivity of the host material, those of the PEG, PEO/WS₂ nanocomposites were found to be high in the order of 1 × 10⁻² to 10⁻³ S cm⁻¹ at ambient temperature, resulted from the guest-host charge transfers.     

角蛋白基药物载体的发展及应用探讨

从毛发中提取角蛋白，开发具有独特功能的角蛋白基药物载体材料，提高药物的活性和生物利用率，既能够增加毛发的利用价值，又能够实现节能减排，符合可持续发展战略要求。对毛发中提取角蛋白进行二硫键重建、自由基聚合、多糖改性和烷基化等改性处理，赋予角蛋白基药物载体优异地功能特性，进一步拓宽其作为角蛋白基药物载体的应用范围。角蛋白基药物载体可被加工成纳米粒子、纤维支架、水凝胶等各种形式用于药物的递送。作为一种高硫含量且具有良好细胞相容性的结构蛋白，角蛋白基药物载体在组织工程、再生医学等领域扮演着重要的角色。     

废硫酸裂解制酸装置转化工序技术改造

介绍了中国石油抚顺石化公司石油二厂废硫酸裂解制酸装置的运行情况及转化工序存在的问题。对该工序进行了技术改造:更换了转化反应催化剂,调整转化工序换热流程,增加了换热器,去掉转化混合器,同时增加了转化工序设备和管线的保温层厚度。改造后装置运行平稳,硫酸转化率达到设计值,并多生产硫酸520万t/a,排放尾气中SO2的质量浓度低于960mg/m3,同时节约电耗100万kWh/a,实现了经济效益和环境效益的双增长。     

新型涂层聚氯代对二甲苯的性能及其应用研究

用真空沉积技术制备了聚氯代对二甲苯(Parylene C)涂膜,考核了聚氯代对二甲苯涂膜与特种材料的附着力及涂膜的拉伸性能、耐化学介质性能、表面抗静电性能,并对具有复杂形状的工件表面进行均匀涂覆作了探索研究。结果表明聚氯代对二甲苯涂膜具有优异的综合性能,可以在复杂形状工件表面形成均匀涂膜,对被涂覆材料起到很好的保护作用。     

Investigation into the effect of carboxylic acid monomer on particle nucleation and growth in emulsifier-free emulsion copolymerization of styrene-butadiene-acrylic acid

Latexes of carboxylated styrene-butadiene rubber were prepared via batch emulsion copolymerization with different amounts of acrylic acid in the absence of emulsifier. The effect of acid monomer was investigated in the particle formation and growth. It was observed that the amount of acrylic acid strongly affected the particle formation. The number of particles and thus polymerization rate increased with increasing of the acid content. There was no significant difference in the polymerization rate per particle in all experiments. The results show that in this case particle growth process is less dependent on the acrylic acid amount in comparison with its influence on nucleation stage and then particle number. Several parameters such as polymerization rate and number of latex particle per unit volume of the aqueous phase were calculated. Attempt was made to evaluate the average number of growing chain per particle. Also average particle diameter of the above carboxylated SBR latexes was obtained through some calculations from the direct measurement of average particle diameter in the swollen state by light scattering technique for the first time.     

工艺因素对低压化学气相沉积氮化硅薄膜的影响

以硅烷和氨气分别做为硅源和氮源,以高纯氮气为载气,采用热壁式管式反应炉,通过低压化学气相沉积(low pressure chemical vapor deposition,LPCVD)技术制备了氮化硅薄膜(SiN_x)。借助椭圆偏振仪研究了SiN_x薄膜的生长动力学,通过Fourier红外光谱和X光电子能谱表征了SiN_x薄膜的性质,并利用原子力显微镜观察了SiN_x薄膜的微观形貌。在其它工艺条件相同的情况下,SiN_x薄膜的生长速率随着工作压力的增大单调增加,原料气中氨气与硅烷的流量之比(R)对薄膜的生长速率有相反的影响。随着反应温度的升高,沉积速率逐渐增加,在840℃附近达到最大,随后迅速降低。当R<2时获得富Si的SiN_x薄膜(x<1.33);当R>4时获得近化学计量(z≈1.33)的SiN_x薄膜。     

感光化学中的近代研究方法

主要介绍了近 2 0年来电子显微技术、波谱技术、核磁共振技术、微波光导测试技术和离子电导测试技术等在卤化银晶体和潜影生成过程研究中的应用。