GaN and AlGaN high-voltage rectifiers grown by metal-organic chemical-vapor deposition

In this paper, we report the study of the electrical characteristics of GaN and AlGaN vertical p-i-n junctions and Schottky rectifiers grown on both sapphire and SiC substrates by metal-organic chemical-vapor deposition. For GaN p-i-n rectifiers grown on SiC with a relatively thin “i” region of 2 μm, a breakdown voltage over 400 V, and forward voltage as low as 4.5 V at 100 A/cm² are exhibited for a 60-μm-diameter device. A GaN Schottky diode with a 2-μm-thick undoped layer exhibits a blocking voltage in excess of ∼230 V at a reverse-leakage current density below 1 mA/cm², and a forward-voltage drop of 3.5 V at a current density of 100 A/cm². It has been found that with the same device structure and process approach, the leakage current of a device grown on a SiC substrate is much lower than a device grown on a sapphire substrate. The use of Mg ion implantation for p-guard rings as planar-edge terminations in mesageometry GaN Schottky rectifiers has also been studied.     

USERS’ TWO-DIMENSIONAL INTEREST AND ITS STORAGE METHOD

The users‘ interest can be mined from the web cache and can be used widely.The interest can be specialized by the two-tuple(term,weight) in the simple interest model,in which the association relations are not mined.and then interest cannot be associated in expressing the users‘interest.Based on analyzing the WWW cache model,this letter brings forward a twodimensional interest model and gives the interrelated methods on how to store the two-dimensional interest model effectively.     

矿业可持续发展理论及应用

在简要回顾我国矿业发展现状及其在环境破坏污染和资源浪费损失的基础上，提出矿业可持纽发展的概念与内涵，论述矿业可持续发展的动态２特征，并就如何实施矿业可持结发展战略进行了思考。     

烟气轮机特殊状态下的保护

从烟气轮机超速的极限开始 ,分别按照阀门的关闭时间为 1 .5s和 6s的两种典型状态 ,对烟机在联轴节断裂等特殊工况下的超速情况进行了分析。最后 ,对烟气轮机在特殊工况下的保护提出了建议。     

Electrical and growth characteristics of Au/Al0.15Ga0.85N:Si structures with various Si incorporations

We have investigated the growth characteristics of n-Al_0.15Ga_0.85N:Si/GaN and the electronic properties of Au/n-Al_0.15Ga_0.85N:Si diode structures grown by metal-organic chemical vapor deposition (MOCVD) with various Si incorporations. The Al_0.15Ga_0.85N:Si layers were grown on undoped GaN/sapphire (0001) epitaxial layers in a horizontal MOCVD reactor at the reduced pressure of 300 torr. The mirrorlike surface, free of defects, such as cracks or hillocks, can be seen in the undoped Al_0.15Ga_0.85N epilayer, which was grown without any intentional flow of SiH₄. However, many cracks are observed in the n-Al_0.15Ga_0.85N:Si, which was grown with Si incorporation above 1.0 nmol/min. While Au/n-Al_0.15Ga_0.85N:Si diodes having low incorporation of Si showed retively good rectifying behavior, the samples having high Si incorporation exhibited leaky current-voltage (I-V) behavior. Particularly, the Au/n-Al_0.15Ga_0.85N:Si structure grown with Si incorporation above 1.0 nmol/min cannot be used for electrical rectification. Both added tunneling components and thermionic emission influence the current transport at the Au/n-Al_0.15Ga_0.85N:Si barrier when Si incorporation becomes higher.     

FindOut: Finding Outliers in Very Large Datasets

Finding the rare instances or the outliers is important in many KDD (knowledge discovery and data-mining) applications, such as detecting credit card fraud or finding irregularities in gene expressions. Signal-processing techniques have been introduced to transform images for enhancement, filtering, restoration, analysis, and reconstruction. In this paper, we present a new method in which we apply signal-processing techniques to solve important problems in data mining. In particular, we introduce a novel deviation (or outlier) detection approach, termed FindOut, based on wavelet transform. The main idea in FindOut is to remove the clusters from the original data and then identify the outliers. Although previous research showed that such techniques may not be effective because of the nature of the clustering, FindOut can successfully identify outliers from large datasets. Experimental results on very large datasets are presented which show the efficiency and effectiveness of the proposed approach. Received 7 September 2000 / Revised 2 February 2001 / Accepted in revised form 31 May 2001 Correspondence and offprint requests to: A. Zhang, Department of Computer Science and Engineering, State University of New York at Buffalo, Buffalo, NY 14260, USA. Email: azhang@cse.buffalo.eduau     

斗晏水电站混凝土面板堆石坝趾板设计

阐述了江西省重点建设项目斗晏水电站混凝土面板堆石趾板设计，并重点介绍较大断层上趾板设计处理方式。     

综采工作面过断层采煤实践

介绍了大同煤矿集团公司挖金湾矿断层构造情况。总结了技术经验，针对具体条件，该矿综采过断层采煤采取了直接割煤、割顶（底）和预掘巷与割底相结合等过断层措施，取得了较好的效果。     

橡胶卷材挤出连续硫化生产线的结构特色与工作原理

介绍了橡胶防水防腐卷材挤出连续硫化生产线的结构、特点和工作原理;指出在目前国内同类设备中,该生产设备具有先进性,并可替代引进设备。     

Ranking Pages by Topology and Popularity within Web Sites

We compare two link analysis ranking methods of web pages in a site. The first, called Site Rank, is an adaptation of PageRank to the granularity of a web site and the second, called Popularity Rank, is based on the frequencies of user clicks on the outlinks in a page that are captured by navigation sessions of users through the web site. We ran experiments on artificially created web sites of different sizes and on two real data sets, employing the relative entropy to compare the distributions of the two ranking methods. For the real data sets we also employ a nonparametric measure, called Spearman's footrule, which we use to compare the top-ten web pages ranked by the two methods. Our main result is that the distributions of the Popularity Rank and Site Rank are surprisingly close to each other, implying that the topology of a web site is very instrumental in guiding users through the site. Thus, in practice, the Site Rank provides a reasonable first order approximation of the aggregate behaviour of users within a web site given by the Popularity Rank.