一种可用于可调谐环行Ti：Al_2O_3激光器的宽带单向器

本文介绍一种宽带单向器的原理及设计。选用ＴＧＧ作磁旋光介质，旋光石英晶片作补偿片，所设计的色散补偿型宽带单向器预计可在７００～１０００ｎｍ波长范围内实现环行激光腔中的单向行波运行；将其应用在可调谐环行Ｔｉ：Ａｌ２Ｏ３激光器中，获得了良好的实验结果。     

Service life planning and performance requirements

Service life planning comprises a model for the determination of a reasonable expected service life for buildings and components, and it establishes a routine for the assessment of design alternatives. A design option is considered reasonable when it meets or exceeds performance requirements over time that have been drawn up specifically for the specific project. Due to this assessment reference, there is a very evident link to the concept of performance-based building. Any stakeholder involved in the value chain or in the design process of the building, as well as regulators and building users, can express performance requirements. Identified requirements, both in relevance and in quality, will vary with the stakeholder and his/her perspective of interest. As building sector manufacturers develop most products with reference to standards rather than with reference to specific requirements, there is no direct link from user requirements to the product design. Instead, the building designer has the responsibility to ensure performance requirements are met by the performance of products integrated into the design. As these design decisions also have to be made at the material and component level, a performance-based building would benefit from an established rationale that enables the communication of performance requirements across the relevant system levels in the relevant design processes. A path for the connection of the established concepts of service life planning and performance-based building is presented. The aim is to identify key elements that need to be developed for the successful linkage of performance-based building with service life planning.     

提高E^2PROM中NMOS管源漏穿通电压的实验研究

为了提高Ｅ＾２ＰＲＯＭ中Ｎ管源漏穿通电压，用实验的方法对制造工艺进行了研究。结果表明，高能量注入是提高ＶＰＴ的有效手段，但受到ｐｎ结击穿的限制，只适用于低区短沟Ｎ管；ＤＤＤ工艺大幅度高ＶＰＴ，但ｐｎ结击穿电压低于２０Ｖ，不能应用于高压ＭＯＳ管；采用适量的防穿通注入和适当增大沟道长度为最理想的工艺途径。     

石英砂的相变与换向器套筒铸件的变形

用呋喃树脂石英砂工艺生产牵引电机换向器套筒出现变形、裂纹等铸造缺陷,是由石英砂相变膨胀引起,后用高铬刚玉砂代替石英砂得到解决.     

Liquid-phase stereoselective thymol hydrogenation over supported nickel catalysts

The stereoselective hydrogenation of thymol was studied in liquid phase over several nickel catalysts, modified by coimpregnation of inorganic compounds containing chlorine. The total activity of all catalysts studied was decreased and was on the same order of magnitude, indicating that chlorine even after reduction remains on the surface and is responsible for the poisoning effects. Such blocking of accessible sites results in similar reaction rates for the catalysts studied. Selectivity and stereoselectivity to menthols and menthones changed significantly. The modifiers could influence the rate of keto-enol transformations, which is thought to be the key selectivity and stereoselectivity governing step.     

月桂氮草酮研究进展

介绍了月桂氮草酮作为高效皮肤促渗剂的发展概况、合成工艺、研究进展及其应用前景。     

Adsorption and desorption characteristics of 2-methyl-4-chlorophenoxyacetic acid onto activated carbon

Adsorption and desorption characteristics of the 2-methyl-4-chlorophenoxyacetic acid (MCPA) from aqueous solution onto the activated carbon (GAC, F-400) were studied. Adsorption equilibrium capacities of the MCPA increased with decreasing pH and temperature of the solution. Adsorption equilibrium of the MCPA could be represented by the Sips equation. The internal diffusion coefficients were determined by comparing the experimental concentration decay curves with those predicted from surface diffusion model and pore diffusion model. The adsorption model based on the linear driving force approximation (LDFA) was used for simulating the adsorption behavior of the MCPA in a fixed bed. Over ninety five percent desorption of the MCPA could be obtained using distilled water.     

混合物MH-81状态方程的研究——从无限稀释活度系数预测混合物汽液平衡

本文由无限稀释活度系数求取混合物MH-81状态方程的二元相互作用参数,预测了二元混合物的汽液平衡,获得了较满意的结果。     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

A voltammetric study concerning the structural stability of Li-overstoichiometric Mg-doped LiCoO2 powders

The effect of Mg-doping and Li overstoichiometry on the structural stability of LiCoO₂ powders has been investigated with emphasis to voltammetric properties. Microparticle cyclic voltammetry (CV) conducted in caustic NaOH to best simulate a non-aqueous electrolyte shows a marked improvement of the structure stability of doped LiCoO₂. In contrast to the unsubstituted LiCoO₂ sample which shows voltammetric peaks associated to the well-known two-phase domain and monoclinic distortion reactions, in Li_1.08Mg_0.06CoO₂, LiMg_0.06CoO₂ and Li_1.08CoO₂ samples these peaks are strongly suppressed providing direct evidence for the existence of a stable solid solution with negligible phase transitions in the reversible intercalation region (3.8-4.2 V vs. Li) as well as in the overcharged region. The effect is higher with Mg-doping, irrespective of the Li overstoichiometry. However, the concomitant presence of Mg and Li excess in the structure is important for obtaining small particle sizes. Since Mg-doping induces a quasi metallic behavior in the samples, whereas the Li excess may provide an higher initial capacity, it is suggested that the Li_1.08Mg_0.06CoO₂ composition may be of interest as positive cathode for advanced Li-ion batteries.