手持式GPS测量在地球化学勘查中的应用

在大比例尺的化探测量中，用GPS单点绝对定点技术来进行测网的布设，减少了控制测量环节。降低了生产成本。因此，GPS绝对定点在化探测量中仍有应用的前景。但是，绝对定位时必须做到：(1)合理选择校正的控制点(三角点或四角点)；(2)正确校正参数；(3)定期地检测仪器；(4)保证仪器的高度角和有效工作时间。本次该方法应用在化探的测网布设中。实测面积7km^2，经传统测量仪器检查验收，证明文中提出的方案完全可以用于生产实践。     

Frames of Reference in Mobile Augmented Reality Displays.

In 3 experiments, the authors investigated spatial updating in augmented reality environments. Participants learned locations of virtual objects on the physical floor. They were turned to appropriate facing directions while blindfolded before making pointing judgments (e.g., "Imagine you are facing X. Point to Y"). Experiments manipulated the angular difference between the learning heading and the imagined heading and between the actual heading and the imagined heading. The effect of actual-imagined on pointing latency was observed for naive users but not for users with brief training or instructions concerning the fact that objects can move with body movements. The results indicated that naive users used an environment-stabilized reference frame to access information arrays, but with experience and instruction the nature of the representation changed from an environment stabilized to a body stabilized reference frame. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

一种T形高压输电线路故障测距新方法

对T形线路的故障测距，现有方法都是先判断故障支路，再将3端线路等效成2端线路进行测距。但在 T节点附近短路，尤其是经高阻短路时，现有的测距方法由于无法正确判别故障支路而存在一定范围的测距死区。针对上述缺陷，分别假设故障发生在某一支路，由假定正常的2段支路端的电压、电流推算求得 T节点电压和注入假定故障支路的电流，从而分别求得3个故障距离。经证明，求得的3个故障距离有且仅有1个在0和对应支路总长度之间，该距离就是真实的故障距离，故障发生在对应支路上。该方法无需事先判别故障支路即可测距，在 T节点附近经高阻故障时无测距死区。其测距精度理论上不受过渡电阻和故障类型影响，无需故障前数据，且对滤波无高要求。EMTP仿真结果表明该方法正确、有效，测距精度高。     

机载红外搜索跟踪系统被动定位滤波算法研究

首先用扩展卡尔曼滤波算法构建了机载红外搜索跟踪系统被动定位滤波模型．然后针对该滤波算法要求先验的噪声统计及存在系统观测模型线性化误差影响滤波精度的特点．利用虚拟噪声技术，提出了适合于红外搜索跟踪系统被动定位的自适应扩展卡尔曼滤波算法。该算法实时地估计了虚拟噪声的统计特性，减小了线性化误差，提高了非线性滤波的精度。仿真结果表明，在完全相同的初始条件下，自适应扩展卡尔曼滤波对目标距离和速度的估计结果明显优于扩展卡尔曼滤波，此算法具有很高的工程应用价值。     

一种适合于同杆4回线的故障测距方法

在对同杆4回线解耦的基础上，提出了一种适合于同杆4回线的故障测距方法。同杆4回线内部发生故障时，可以将故障分量分解为12序分量，且利用该12序分量进行故障测距。考虑到在任何故障类型下，同杆4回线内部都会存在反序分量，所以提出了基于反序环流分量的故障测距方法。当同杆4回线内部发生故障时，从线路两端计算到故障点的反序环流分量电压相等，利用该关系可以求出故障点的精确位置。由于相互独立的12序分量完全能够解决线间耦合问题，文中提出的测距算法能够精确测距，测距精度不受故障类型影响。大量ATP仿真结果表明所提出的测距算法完全适用于同杆4回线的故障测距，测距精度不受过渡电阻、系统运行方式、线路两端功角的影响。     

施工系统中混凝土拌和工厂位置选择综合评价模型

在大型水利水电工程施工系统中，混凝土拌和工厂位置选择涉及大量不确定性因素，本文用可能性－满意度来描述决策者对不确定性估计的主观性和管观性，论述了可能性与模糊集，满意度与信任度的对应关系，给出了可靠性－满意度的计算方法。以系统分析的层次性原理为基础，建立了厂址选择的综合评价模型，通过一个实例分析，得到几点结论。     

FACTORS AFFECTING THE SOIL MICROBIAL QUALITY MEASUREMENTS OF BIOMASS QUOTIENT AND RESPIRATION QUOTIENT

The soil microbial biomass quotient (expressed as a percentage of the total soil organic carbon) and the specific rate of carbon-dioxide production by soil microbes (respiration quotient) are often used as indicators of stress on soil microbial populations. A low biomass quotient or a high respiration quotient is considered to be an indication of stress from, for example, toxicity from metals in sewage sludge applied to soils. These metabolic quotients are affected by a wide variety of other factors such as the biodegradability of soil organic-carbon amendments, plant inputs of organic carbon into soils, natural variations in microbial population sizes with depth, and in the rhizosphere of plants. These variations could be sufficiently large to make interpretation of changes in biomass quotient and respiration quotient, as a response to stress, problematical.     

Locational analysis for regionalization of Turkish Red Crescent blood services

After a series of earthquakes in 1999, Turkish Red Crescent (TRC) has engaged in a restructuring for all of its activities, including the blood services. Our study on the blood management system had been started as part of this initiative to restructure the blood services and improve both their effectiveness and efficiency. In the current system of TRC, not much consideration has been given to how the locational decisions affect the performance of blood centers, stations and mobile units. In recent years, however, there has been much discussion regarding the regionalization of the blood management system in Turkey. In this study, we develop several mathematical models to solve the location–allocation decision problems in regionalization of blood services. We report our computational results, obtained by using real data, for TRC blood services.     

Heat loss and thermoelectric generator design

With the object of evaluating its importance to thermoelectric generator design, heat loss is introduced into the standard thermoelectric generator design theory. The theory for both the constant hot and cold junction temperatures model and the constant heat input model are so modified. The modification is first order and, therefore, is limited to small leg heat-transfer coefficients. Numerical results using representative properties show that significant differences can exist between the optimum geometry and performance of a generator idealized as lossless and those of a generator designed by the modified theory. The largest differences occur with the constant heat input model.