New quadratic models for the maximum weighted cut problem

New quadratic models are proposed to improve the upper-bound estimates in the maximum weighted cut problem. They are found by two original methods for deriving redundant quadratic constraints. A well-known linear model is shown to follow from the models proposed. Recommendations on how to develop its strengthened analogs are given. This study is partially sponsored from the grant UM2-2574-KV-03 (CRDF Cooperative Grants Program). __________ Translated from Kibernetika i Sistemnyi Analiz, No. 1, pp. 63—75, January–February 2006.     

Time and Temperature Factors in Construction of Rock Strength Criteria

Using the synthesis of the kinetic concept on solid strength and the Coulomb - Mohr strength theory as the base, the failure conditions taking into account the time and temperature factors are obtained.     

织构对铟凸点剪切强度的影响

制作了2种形式的铟凸点：即直接蒸发沉积的铟柱和将铟柱回流得到的铟球。同时对比了铟柱和铟球2种凸点的剪切强度，测试结果表明铟球剪切强度为5.6MPa，铟柱的剪切强度为1.9MPa，前者约为后者的2.9倍。对铟凸点微观结构的X光衍射分析发现：铟柱剪切强度低是织构弱化所致；铟球剪切强度高是由于回流破坏了铟柱的理想（101）丝织构模式，从而提高了铟球的剪切强度。     

An investigation of the relation between the temperature dependences of the initial unbalance and the output signal of resistance strain sensor bridge circuits

The relation between the initial unbalance and the output signal of bridge circuits when acted upon simultaneously by the physical factor being measured and the temperature of the surroundings when the bridge is supplied from a voltage or current source is investigated. Analytic relations are obtained which explain the temperature dependence of the useful output voltage under external physical action. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 48–49, 2007.     

Family-Responsive Interventions, Perceived Organizational and Supervisor Support, Work-Family Conflict, and Psychological Strain.

This study examined organizational family-responsive policies, perceptions of the organization as family supportive, and supervisor support as issues that may be salient to the experience of conflict between paid employment (work) and family roles. Data were collected from 355 managerial personnel in New Zealand. Although work-family conflict and psychological strain were strongly linked, the availability of organizational policies had no significant association with levels of conflict or strain, whereas policy usage was related only to work-to-family interference and not to family-to-work interference. On the other hand, perceptions of the organization as family supportive and supervisor support for work-family balance displayed significant relationships with key variables, highlighting the importance of these variables for interventions designed to ameliorate the negative impact of work-family conflict on managerial well-being. Implications for the effective implementation of family-responsive interventions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension–compression loading: experimental results

The primary aim of this paper is to present results describing in detail the behaviour of ±45° E-glass/MY750 (GRP) tubes, of various wall thicknesses, subjected to equal biaxial tension–compression loading, generated under combined internal pressure and axial compression. The role played by the non-linear lamina shear has also been assessed by comparing various shear stress–strain curves for embedded laminae (extracted from tests on ±45° tubes subjected to circumferential: axial stress ratios SR=1:0, 1:−1 and 2.3:−1) with that of an ‘isolated’ lamina (measured from torsion of 90° tubes). Extracted shear failure strains, for embedded laminae, were more than four fold larger than those measured at ultimate failure for an ‘isolated’ lamina. Soft characteristics were observed in the embedded lamina and these were believed to be due to interaction between early matrix damage initiation (and propagation) and shear. Factors affecting the behaviour of the tubes, such as bulging, scissoring, thermal stresses and stress variation through the thickness are discussed.     

一种基于GE90-30PLC的飞剪自动控制系统

本文介绍了调整线材轧线精轧机前专用于切头的启停式飞剪的自动控制系统。该系统以GE90—30PLC为控制核心，辅以热金属HMD、光电编码器等元件，能很好地完成飞剪的剪切及定位。其中着重阐述了飞剪控制中各个重要参数的计算原理和方法。     

保序回归的大样本性质

利用保序回归与极大似然估计之间的关系,从极大似然估计解的大样本性质出发,得到了保序回归解的两个大样本性质。     

SAR图像组合分割算法

由于存在乘性斑点噪声的影响,给SAR图像分割造成很大困难,本文研究利用最大似然区域增长分割算法,提出区域增长前引入自适应边缘检测,图像分割性能获得较大提高.介绍了我们研究的分割性能优异的模拟退火分割算法,提出了分割性能接近模拟退火并且在SAR图像分割中比较实用的模拟退火和最大似然混合分割算法,并给出了这些分割算法的分割性能比较,以及在实际分割SAR图像时应当如何选择分割算法.     

利用预曝光技术制备复合结构光纤光栅传感器

报道利用预曝光技术制备的复合结构光纤光栅传感器。提出利用预曝光技术使某一小段光纤的折射率变大,而后在预曝光部分和未曝光部分的交接处一次性写入光栅,即可得到具有两个透射峰的透射谱。实验研究了该复合结构光纤光栅在温度和应力传感上的应用。实验结果表明,利用该复合结构光纤光栅可以实现温度与应变的同时测量。