节能降耗提高矿山效益

节能降耗是每一个矿山提高经济效益的有效途径。我们采取提高球磨机处理能力，降低单耗；利用“分时计价”政策，采用“避峰作业”；使用新设备等措施节能降耗，提高矿山经济效益。     

CO2压缩机节油措施与效果

本分析了山西分公司二期CO2压缩机润滑油消耗高的原因，介绍了采取的针对措施以及2002年取得的节能效果，并进一步指出了CO2压缩机的节能空间。     

基于模糊信息处理的中板轧机微机在线监测系统

中板轧机是中板厂最重要的生产设备，对其工况进行在线监测意义重大，各种传感器将轧机的工况信息传送给微机系统，微机系统将这些信息进行模糊处理，发出相关信息，指导系统安全，高效运行。     

苯乙烯类嵌段共聚物的生产及市场分析

介绍了苯乙烯类嵌段共聚物(SBC)的国内外生产和消费情况，分析了我国SBC的市场前景，提出了加大研发力度、提高SBC生产术、扩大生产规模、提高国内市场占有率，建设多功能装置等建议。     

铜密闭鼓风炉生产效益的回归分析

通过铜密闭鼓风炉生产过程中关键指标的回归分析,寻找降低消耗、增加产出、提高经济效益的有效途径     

Consumption of solutions containing sodium chloride is enhanced in female oxytocin-deficient mice.

Intact and ovariectomized oxytocin (OT)-deficient (OT-/-) and wild-type (OT+/+) mice were tested for consumption of 0.5 M NaCl solution or tap water in a 2-bottle choice test. During 3 days of acclimation, voluntary ingestion of NaCl was equal between genotypes. After overnight fluid deprivation, intact OT-/- mice ingested 2 times more NaCl solution than OT+/+ mice in the 6th hr, but not the 1 st hr, after reintroduction of fluid. Ovariectomized mice consumed less than intact mice after overnight fluid deprivation. When a 0.2 M NaCl solution was administered for 6 days in ovariectomized mice, OT-/- mice voluntarily consumed greater amounts than OT+/+ mice. After overnight fluid deprivation, consumption by OT-/- mice was 3 times that of OT+/+ mice at 1 hr and 2-fold greater after 6 hr. Enhanced intake of NaCl-containing solutions in female OT-/- mice suggests that central OT may be an important inhibitor of sodium consumption. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

考虑介质变形和长期导流能力的裂缝性气藏压裂产能模拟研究

在气藏开采过程中，由于孔隙压力的不断降低，使得介质变形而导致渗透率的变化，进而影响井的产量。针对这一问题，提出了各种流体与固体耦合的数值模拟模型。然而，对于裂缝性储层和多相渗流问题，流固耦合模型中许多参数不易获取，且求解难度很大，使得耦合模型存在一定的应用局限性。很少有文献在气井产能模拟时将介质变形和就地的长期导流能力加以综合考虑。文章考虑介质变形引起的天然裂缝渗透率的变化和裂缝导流能力随时间递减的影响，建立了裂缝性气藏压裂后气水两相渗流数学模型，推导出了数值计算模型；本模型易于编程求解，对于研究裂缝性气藏的渗流特征，特别是进行单井压后产能预测具有一定的实用意义。计算表明：不考虑介质变形和导流能力递减所预测的气产量偏高；目前普遍使用的气藏数值模拟软件中，假定渗透率、裂缝导流能力为常数，以致模拟计算结果比实际偏高。     

考虑电气价因素的压气站运行优化模型研究

针对压气站运行优化模型，引入了两个开关型变量：压气站开关变量和压缩机开关变量：同时还引入了考虑提供单位功率所需的能耗量两个变量。其优点是考虑了压气站越站和站内压缩机停机的情形，而且还直接引入与价格相关的变量，使得模型在运行优化的结果上更能体现某种方案的经济性，这对于管道运行商来说，更具有直观性。     

钌基厚膜电阻传导模型初探

介绍钌基厚膜电阻的三种传导模型。三种模型都可以得到较满意的R—V曲线，不足处是链模型得出电阻率和导电相粒子形状及尺寸的关系和实验事实不符；有效介质模型不能反映厚膜电阻形成过程中众多因素的影响；渗透模型很多参数的获得有赖经验公式。渗透模型能反映烧结过程中更多因素的影响，并可解释方阻与导电相粒度及峰值温度的变化关系。     

Cost estimates to guide pre-selection of processes

A process is a method of shaping, joining or surface-treating a material. Process selection has three steps. The first is to identify from the ‘menu’ of all available processes, the subset, which can give a chosen material the desired shape with the desired detail, precision and finish. The second is to choose, from among these, the ones that will do so at the lowest cost. The final step is to investigate the most promising processes in depth, exploring considerations such as availability, in-house experience, safety and environmental issues. The first two steps can be thought of as process pre-selection. Components have to be assembled and finished to create products. Here too, the ability to rank by cost, however crudely, helps guide pre-selection. Cost models are reviewed from the perspective of material and process selection. An approximate model is useful provided it has generality—that is, it must allow comparison of very different processes. Many approaches fail in this. One that works, based on resource consumption, is developed here and its use for selection is illustrated. It has been implemented as part of a tool that allows rapid pre-selection from a database of 112 processes.