Investigation of structural and optoelectronic properties of BaThO3

Structural and optoelectronic properties of BaThO₃ cubic perovskite are calculated using all electrons full potential linearized augmented plane wave (FP-LAPW) method. Wide and direct band gap, 5.7 eV, of the compound predicts that it can be effectively used in UV based optoelectronic devices. Different characteristic peaks in the wide UV range emerges mainly due to the transition of electrons between valance band state O-p and conduction band states Ba-d, Ba-f, Th-f and Th-d.     

提高韶冶烧结氧化物料处理能力的研究与应用

介绍韶冶在氧化物料对工厂生产经营和现场环境造成不利影响的条件下,通过设备、工艺两方面的研究,提高氧化物料处理能力,从而增强烧结工艺对原料的适应性,使干精矿含硫降低,烧结机产能大幅度提升,烧结块质量保持较高水平,年创效益约2 500万元。     

On the experimental and numerical investigation of clay/epoxy nanocomposites

Due to increasing use of clay/epoxy nanocomposites in industry, investigation of mechanical properties of clay nanocomposites has become of great interest. While the stiffening mechanism of clay nanocomposites is well documented, there is still not a clear understanding about how addition of clays affect the fracture behavior of clay/epoxy nanocomposites. The main aim of this paper is to measure and explain the effect of clays on ductility reduction of these nanocomposites. First, epoxy and clay/epoxy nanocomposites with different clay weight ratio were built. Then, the damage parameters of epoxy and clay/epoxy nanocomposites were measured by variation of the elasticity modulus. Based on loading–unloading experiments, the Lemaitre damage parameters for epoxy and clay/epoxy nanocomposites were extracted. Crack initiation and propagation in dog-bone sample were simulated for epoxy and clay/epoxy nanocomposites using the eXtended Finite Element Method (XFEM). The comparison between experimental and numerical results shows that the proposed method can predict the crack initiation location and propagation path in clay/epoxy nanocomposites.     

浅谈建筑工程价格管理中的成本控制

简述了我国建筑工程造价的发展过程,从人工、机械、材料、工期等方面具体阐述了合理控制工程成本的方法,以期指导施工企业以尽量少的人、机、料消耗创造较大的价值和效益。     

铅酸蓄电池正极添加剂的研究

回顾了铅酸蓄电池极板正极活物质添加剂的发展历程,分析了正极添加添加剂的难度,对所试验的添加剂及试验方法作了较详尽的说明,对关键添加剂的作用机理予以分析,并给出了实验数据和循环测试结果,在电池初容量、化成难易程度、循环寿命等方面进行了分析。     

Preparation and electrochemical properties of La<Subscript>1.0</Subscript>Sr<Subscript>1.0</Subscript>FeO<Subscript>4+δ</Subscript> as cathode material for intermediate temperature solid oxide fuel cells

Cathodic material La_1.0Sr_1.0FeO_4+δ for an intermediate temperature solid oxide fuel cell (IT-SOFC) was prepared via the glycine-nitrate process and characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM). XRD results showed that no reaction occurred between the La_1.0Sr_1.0FeO_4+δ electrode and Sm_0.2Ce_0.8O_1.9 (SDC) electrolyte at 1000 °C. SEM results showed that the electrode formed good contact with the SDC electrolyte after sintering at 1000 °C for 2 h. The electrochemical properties of La_1.0Sr_1.0FeO_4+δ were measured using electrochemical impedance spectroscopy (EIS) and steady state polarization measurement. At 700 °C, the polarization resistance was about 3.90 Ωcm², and the lowest polarization overpotential was 57 mV at a current density of 55 mA cm⁻².     

90nm工艺及其相关技术

ITRS2001规划2004年实现90nm工艺,英特尔、AMD等世界顶级半导体公司将于2003年采用90nm工艺量产微处理器和逻辑器件。这样使ITRS2001整整提前了一年。90nm工艺包括193nm光刻技术、高k绝缘材料、高速多层铜互连技术、低k绝缘材料、应变硅技术和电压隔离技术等新技术。193nm光刻技术是实现90nm工艺达量产的最关键技术,为此,必须采用193nmArFstepper(准分子激光扫描分步投影光刻机)。讨论了90nm工艺达量产的难点,如掩模版成本较高、成品率较低和应用面暂时不宽等。     

PWB设计制造工艺和基材对耐CAF影响的评估

概述了CAF机理,各种标准基材,其它PWB基材和新型非双氰胺FR-4基材的电化学迁移或耐CAF的温度-湿度-偏压测试和数据分析方法。     

真空荧光显示屏基板绝缘层的质量控制

详细地分析了影响真空荧光显示屏基板断极和连极的主要原因是绝缘层的印刷质量，并提出了强制绝缘层印刷质量的措施。     

碳纳米管的大面积合成及磁性(英文)

通过溶胶凝胶法和氢气还原法制备出Co纳米颗粒并以此作为催化剂材料,通过催化裂解苯的方法,实现了较低温度(460℃)下在Co纳米颗粒表面上合成碳纳米管。采用X射线衍射、激光喇曼光谱、场发射扫描电镜、透射电子显微镜和振动样品磁强计对所合成的碳纳米材料进行了表征。通过优化实验参数,可制备出最大产率和纯度分别为约50和98.02%(质量分数)的碳纳米管。由于铁磁性Co纳米颗粒的进入,使得整个复合物表现出比较好的磁性能。和以往以苯作为碳源合成碳纳米材料相比,此合成方案简单、成本低,且对环境无任何危害,非常适用于磁性碳纳米复合物的批量合成。