丽水市矿产资源产业必须走可持续发展之路

丽水市的优势自然资源之一是矿产资源。本文对丽水市境内的矿产资源的优势及开发现状进行了详尽分析。在此基础上提出如何开发利用好这一资源 ,走可持续发展道路的具体措施     

The influence of various reaction parameters on the performance of (α‐diimine)nickel(II) catalysts in ethylene oligomerization reactions

Modified (α‐diimine)nickel(II) catalysts are suitable for ethylene oligomerization reactions. Due to the mechanism (“chain running”), the formation of double‐bond isomers and branched olefins can be observed. The obtained oligomer mixtures show a Schulz–Flory distribution. Increasing ethylene pressure favors the selectivity of α‐olefin formation. The same effect can be observed when Lewis bases like thiophene or furane are added to the oligomerization reaction mixture. These results can be related to an interaction of the additives with the catalytic active species during the oligomerization process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1356–1361, 2003     

Ni的添加对TiB2-CU基复合材料微观组织的影响

利用燃烧合成工艺原位合成了TiB2-Cu基复合材料，为了改善TiB2陶瓷和Cu基体的润湿性，将金属Ni作为合金化元素加入到TiB2-Cu复合材料。通过XRD，SEM，EPMA和TEM等检测手段对金属Ni的添加对TiB2-Cu基复合材料微观组织的影响进行了研究。结果表明，含Ni复合材料的金属粘结相的面间距比不含Ni时Cu的面间距均有不同程度的减小；Ni加入后，TiB2-Cu-Ni复合材料的组织较TiB2-Cu复合材料更加致密，但陶瓷颗粒尺寸却大于TiB2-Cu复合材料的颗粒尺寸；Ni的加入降低了复合材料的导热率和冷却速度，使得部分TiB2陶瓷颗粒有足够的时间长成棒状，同时造成TiB2陶瓷颗粒间形成更多的烧结颈；Ni的加入也改善了陶瓷与金属粘结相之间的润湿性，使陶瓷相与金属粘结相的界面结合牢固，看不到TiB2-Cu复合材料中界面脱开的现象。金属Ni的添加有利于改善TiB2-Cu基复合材料的微观组织，进而利于复合材料的致密化。     

The electropolymerization of pyrrole at a CuNi electrode: corrosion protection properties

Pyrrole was successfully electropolymerized at a copper–nickel electrode in a near-neutral sodium oxalate solution containing Cu²⁺ cations to generate a homogenous and adherent polypyrrole film. The presence of the Cu²⁺ ions increased both the rate of the electropolymerization reaction and the adherence of the polymer at the CuNi interface. In the absence of these cations, oxidation of the electrode occurred generating a nickel-rich layer that was not sufficiently conducting, under the electropolymerization conditions employed, to facilitate the electron-transfer reaction and the electropolymerization of pyrrole.These films remained stable and exhibited significant corrosion protection properties in acidified and neutral 0.1 mol dm⁻³ NaCl solutions even on polarization of the electrodes to high anodic potentials.     

The bioconversion of tunisian phosphorite usingAspergillus niger

It is well known that the production of phosphoric fertilizers by traditional methods is connected with certain environmental problems, particularly related to use of acids during the decomposition of natural phosphates. A basic problem is also the fact that only 15 – 20% of the phosphorus contained in superphosphates is assimilated by plants.The development of methods to process natural phosphates without acid precipitation has potential advantages and in this respect biotechnological processing of natural phosphates in order to obtain organo-mineral fertilizers is very promising. The possibility of bioconverting the phosphorus of natural phosphates by usingAspergillus niger fungi through their deep incubation has been investigated. The investigations aim to achieve a high degree of P₂O₅ extraction from the phosphates with conversion from a non-utilizable to a utilizable form. The influence of the fungal strain, the kind of nutritive medium and the time of incubation of the process of biological mobilization of the phosphate rock is examined.It was established that the time of incubation, the kind of micro-organisms of theAspergillus niger group, as well as the kind of nutritive medium, influence significantly the process of bioconversion and the conversion of phosphorus from non-utilizable to water-soluble and utilizable for plants form. A maximum degree 90% of phosphorus extraction in the form of water-soluble and citrate-soluble has been reached for 10-day incubation. Physicochemical examinations have been carried out and they have proved that, as a result of the produced organic acids, a process of decomposition of the initial Tunisian phosphorite takes place.     

Electrochemical intercalation in NiOx thin films

In this work we investigated the mechanism of the electrochemical intercalation reactions in rf sputtered nickel oxide thin films electrodes by two techniques: mechanical stress change measurements by means of an optical technique and mass changes using an electrochemical quartz microbalance (EQCM). The experiments were performed in alkaline electrolytes containing cations of the first column of the periodic table. Reversible mass and volume changes were observed. In order to explain these experimental results, an exchange reaction is proposed, in which the oxidation process is accompanied by the deinteractional of a relative large number of “light” cations, simultaneously with the intercalation of a smaller number of heaviest cations.     

Magnetic properties of nickel filament polymer-matrix composites

The magnetic properties of polyethersulfone-matrix composites with 3-19 vol.% polycrystalline nickel filaments (0.4 (im diam) were investigated. These filaments were found to exhibit hysteresis energy loss 10800 J/m³ of nickel and coercive force 16.9 kA/m, compared to corresponding values of 4930 J/m³ and 4.7 kA/m for 2 μ.m diam polycrystalline nickel fibers, 1020 J/m³ and 0.5 kA/m for 20 μm diam polycrystalline nickel fibers, and 1280 J/m³ and 2.3 kA/m for solid polycrystalline nickel.     

CaF_2-CaO-MgO-Al_2O_3-SiO_2电渣渣系高温力学性能的研究

本文针对结晶器与铸锭作相对移动的电渣重熔过程中对渣系的高温强度及塑性的要求,对10种CaF_2-CaO-MgO-Al_2O_3-SiO_2渣组成进行了渣的高温强度及塑性的测定,建立了渣组成—渣的岩相结构—渣高温强度及塑性间的对应关系,并选择出较合适的成分范围为CaF_2 35～60％,CaO 10～25％,Al_2O_3 10～20％,SiO_25～15％,MgO≈5％。对其中一个成分的渣进行了电渣热穿孔熔铸中空锭生产实验,并取得了良好的表面质量。     

松香及其衍生物在浮选分离中的应用

介绍了松香的来源、化学组成及理化性质；讨论了松香及其衍生物在非硫化物矿浮选分离、有色金属离子的浮选分离以及从水溶液中浮选分离有机物等方面的应用情况。