液相化学还原法制备不同形貌的多晶纳米镍

采用液相化学还原法,在1,2-丙二醇体系中,分别使用吐温-80（Tween-80）、聚乙二醇-6000（PEG-6000）和十二烷基硫酸钠（SDS）与聚乙二醇-6000（PEG-6000）的混合物作为修饰剂,利用1,2-丙二醇还原相同母体醋酸镍,制备形貌分别为海绵体、纤维状、雪花状的多晶纳米镍;在水体系中,使用SDS为修饰剂,利用水合肼还原相同母体醋酸镍,制备球形多晶纳米镍。通过X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）对纳米镍进行表征。利用傅立叶红外（FTIR）分析初步解释不同形貌纳米镍的形成机理。     

Interplay between Coumarin Accumulation,Iron Deficiency and Plant Resistance to Dickeya spp.

Coumarins belong to a group of secondary metabolites well known for their high biological activities including antibacterial and antifungal properties. Recently, an important role of coumarins in plant resistance to pathogens and their release into the rhizosphere upon pathogen infection was discovered. It is also well documented that coumarins play a crucial role in the Arabidopsis thaliana growth under Fe-limited conditions. However, the mechanisms underlying interplay between plant resistance, accumulation of coumarins and Fe status, remain largely unknown. In this work, we investigated the effect of both mentioned factors on the disease severity using the model system of Arabidopsis/Dickeya spp. molecular interactions. We evaluated the disease symptoms in Arabidopsis plants, wild-type Col-0 and its mutants defective in coumarin accumulation, grown in hydroponic cultures with contrasting Fe regimes and in soil mixes. Under all tested conditions, Arabidopsis plants inoculated with Dickeya solani IFB0099 strain developed more severe disease symptoms compared to lines inoculated with Dickeya dadantii 3937. We also showed that the expression of genes encoding plant stress markers were strongly affected by D. solani IFB0099 infection. Interestingly, the response of plants to D. dadantii 3937 infection was genotype-dependent in Fe-deficient hydroponic solution.     

电梯用含氮节镍奥氏体不锈钢QN1701的组织和性能

借助Thermo-Calc热力学相图计算软件,开发了用于电梯的含氮节镍奥氏体不锈钢QN1701(12Cr17Mn7Ni2Cu2N),以代替443(019Cr21CuTi)超纯铁素体不锈钢。通过OM、SEM和电化学工作站等方法研究了QN1701和443不锈钢的组织及性能。N原子起着间隙固溶和细晶强化的作用,使QN1701不锈钢的屈服强度提高至400 MPa以上,达到443不锈钢的1.32倍。QN1701不锈钢的点蚀电位为241 mV,低于443不锈钢的289 mV,但其点蚀速率为9.10 g/(m2·h),低于443不锈钢的14.58 g/(m2·h)。在电梯用研磨拉丝表面状态下,QN1701不锈钢在质量分数为10%NaCl中性盐雾和干湿循环盐雾等加速腐蚀试验中的耐蚀性能均优于443不锈钢。分析发现,443不锈钢添加一定量的Nb、Ti稳定化元素所生成的(Nb,Ti)(C,N)析出相经研磨拉丝处理后,暴露于表面或被拖拽后留下微坑,导致其耐蚀能力急剧下降。综上所述,相较443不锈钢,QN1701不锈钢具有强度更高、伸长率更大和在研磨拉丝表面状态下耐蚀性更好等特点,这对于电梯轻量化设计和长寿命具有重要价值。     

印制板化学镀镍

介绍了采用金属Zn粒子悬浮液活化要镀镍的印制板(PCB)Cu电路表面,使其可以进行化学镀镍的工艺方法,它可以克服Pd-Sn活化的缺点.     

NICKEL-BASED ALLOYS IN GE AIRCRAFT TURBINES：PAST,PRESENT ＆ FUTURE

1. Introduction Freedom to travel anywhere in the world, both quickly and inexpensively, defines our modern era. Despite year-to-year variation, the long term demand for travel by airplane continues to grow. Three ma- jor systems comprise the modern airplane: the aircraft structure that encompasses the fuselage, wings, and landing gear; the avionics that enable flight through crowded skies in nearly all weather conditions; and the propulsion system that powers the aircraft. Improvements in mat…     

Preparation of carbon nanotube composite material with metal matrix by electroplating

It is demonstrated that the nickel can be deposited directly on the surface of carbon nanotubes without pre-sensitization by Sn^2＋ and Pd^2＋ in a watt bath containing suspended nanotubes by electroplating. The nickel is deposited as spherical nanoparticle on the nanotubes. By increasing reaction time, the carbon nanotube is fully coated with nickel. A probable model, which represents the formation process of carbon nanotube-nickel composites by electroplating, is presented. The results show that this method is efficient and simple for preparing carbon nanotube-metal composite.     

预压缩单晶镍基合金的组织结构及在拉伸蠕变期间的粗化特征

对[001]取向单晶镍基合金进行压应力处理，获P-型筏状结构后，对其进行拉伸蠕变性能测试及SEM形貌观察，研究了P-型筏状结构的粗化特征及影响因素。结果表明：由于应力场的差别，样品不同位置筏状γ＇相粗化程度及特征不同，近断口处筏状γ＇相扭曲且粗化程度加剧，随离断口距离增加，γ＇相粗化程度减弱。有限元分析认为：外加载荷改变了水平和垂直γ基体通道中的错配应力分布，并使立方γ＇相不同界面晶格发生挤压或扩张应变，这可以促进元素的互扩散和γ＇相的定向生长，是形成P-型筏状组织的主要原因。在高温及拉应力作用下，P-型γ＇相端部沿垂直于应力轴方向优先生长和相互横向连接，并进一步形成折叠的层状组织。     

Interaction between erosion and high-temperature corrosion of metals: The erosion-affected oxidation regime

The combined erosion-oxidation of nickel, cobalt, and the oxides of these metals have been studied at 780°C in air to examine two regimes of interactionnamely, a regime of erosion-enhanced oxidation during which an oxide scale of constant thickness covers metal specimens, and a regime of oxidation-affected erosion that is characterized by a composite surface layer of metal, oxide, and erodent. In the case of cobalt, these two regimes have been documented and the transition from one regime to another described. For the range of conditions examined, only the oxidation-affected erosion regime was observed for nickel due to its lower oxidation rate compared to cobalt.     

萃取预分离法分离富铕中钇矿新工艺

采用一种新的串级萃取方式--萃取预分离法分离富铕中钇矿的新工艺.原料首先流入十几的三出口预先粗分离工艺,其萃余液La～Gd(TbDy)直接流入Nd/Sm工艺;中间出口流入(Gd)Tb～HoY(Er)Gd～Dy/Ho～LuY细分离工艺;出口负载有机相(Ho)Er～LuY流入Gd～Dy/Ho～LuY的洗涤段.结果表明,新工艺的粗分离工艺将占原料约70%的La～Gd(TbDy)预分离掉,使流入Gd～Dy/Ho～LuY工艺的稀土量减少约70%;由于Gd～Dy/Ho～LuY分组的萃余液GdTbDy含Ho2O3小于0.03%,省去原工艺的GdTbDy/HoY分离;新工艺的处理能力提高30%,酸碱消耗减少20%以上,贵重稀土元素Eu和Tb的存槽量大大减少.     

Effects of phosphorus addition on the magnetic properties of sintered Fe-50 wt.% Ni alloys

Phosphorus was added to Fe-50 wt.% Ni in the form of a coated composite powder via an electroless plating process. Addition of phosphorus to Fe-50 wt.% Ni facilitated increases in density and grain size, both of which were beneficial to magnetic performance. Because of the homogeneous distribution of phosphorus in the powder, the optimal phosphorus addition was much lower than for those using Fe₃P as the phosphorus precursor. The optimal phosphorus addition was close to its maximum solubility in Fe-50 wt.% Ni (about 0.5 wt.%), above which precipitation of excessive phosphorus in the form of iron nickel phosphide, (Fe,Ni)₃P, effectively degraded the magnetic properties of Fe-50 wt.% Ni. Without the addition of phosphorus, good magnetic properties could be achieved only when the sintering temperature was high enough (>1200 °C) to result in a high sintered density and large grains in the sintered structure.