我国先进制造技术的现状和发展途径

介绍了现在制造业中面临的问题，通过对问题的分析，提出了发展先进制造前沿技术的见解和在我国发展先进制造技术的途径，同时展望了先进制造技术的发展前景。     

The Difference in Turbulent Diffusion between the Active and Passive Scalars in a Thermally Stably Stratified Medium

The difference in the turbulent diffusion between the active (heat) and passive (mass) scalars in a thermally stably stratified medium is investigated. The axisymmetric problem is treated on the formation of a turbulent circulation flow above a heated disk and on the turbulent diffusion of a passive scalar (impurity) from a continuous surface source in a stably stratified medium. The results indicate that the thermal stratification causes appreciable differences in the coefficients of turbulent transfer between the active (heat) and passive (mass) scalars. This means that the assumption of the identity of the coefficient of turbulent diffusion of heat and mass, employed in conventional models of turbulence, produces significant errors in estimating the heat and mass transfer in a thermally stably stratified medium.     

引水发电系统无压隧洞中弃水堰位置的数值模拟研究

水电站引水发电系统无压隧洞中的水力过渡过程是近年来电站设计中出现的一个新课题,特别是流域梯级电站开发中经常遇到。结合工程实例应用扩散法,给出了无压隧洞水力过渡过程数值模拟的基本方程以及上下游及弃水堰等边界附加方程,模拟了弃水堰布置在不同位置下,无压隧洞内的水位变化过程。研究成果和讨论对实际工程应用具有参考意义。     

Active set truncated-Newton algorithm for simultaneous optimization of distillation column

An active set truncated-Newton algorithm (ASTNA) is proposed to solve the large-scale bound constrained sub-problems. The global convergence of the algorithm is obtained and two groups of numerical experiments are made for the various large-scale problems of varying size. The comparison results between ASTNA and the subspace limited memory quasi-Newton algorithm and between the modified augmented Lagrange multiplier methods combined with ASTNA and the modified barrier function method show the stability and effectiveness of ASTNA for simultaneous optimization of distillation column.     

粉尘薄膜爆轰

与普通爆轰不同，粉尘薄膜爆轰波前氧化剂与燃料处于分离状态．由于激波作用下壁面燃料的注入才于壁面附近形成燃烧的粉尘云，燃烧释放的热使激波自持形成粉尘薄膜爆轰。本文在长2、8m，横截面20mm×20mm的方型水平激波管中对此类爆轰进行了实验研究．并根据作者建立的模型对其二维结构进行了数值模拟。     

激光辐照制备搪瓷涂层

激光辐照制备的搪瓷涂层表面粗糙,与金属基材结合牢固。一般由 Si,Al,Na,K,B,F,O等元素组成。在激光辐照过程中 K,Na 明显地挥发,从而在涂层中的含量明显减少;Co,Ni,主要分布在界面附近;Fe 元素也由基材进入涂层,呈梯度状分布,在界面过渡区含量很高,在涂层内含量很低。搪瓷涂层的形成与激光辐照参数,特别与激光功率间存在极为密切的关系;只有选用合理的参数,才能制得搪瓷涂层。     

热分层流动计算中若干差分格式的比较

本文应用常规的守恒方程及湍流模型，对二维池内热分层流动建立了数学模型，并在Ｐａｔａｎｋａｒ的压力校正法基础上对该数学模型进行了数值计算，计算中的差分格式为乘方格式、一阶迎风、二阶迎风和ＱＵＩＣＫ。通过与实验的比较分析，建议计算应采用ＱＵＩＣＫ格式，并在进行风格独立性试验的基础上使用加密网络。     

AN EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE STARTING FLOW OF A UNIFORMLY ACCELERATING CIRCULAR CYLIINDER

The starting flow around a uniformly accelerated circular cylinder is investigatedby flow visualization techncque and solving N-S equations numerically in detail.The results ofthe starting flow are similar with those of the impulsively started one.At lower Re_α,numbers the“phenomenon a”is revealed;the“phenomenon β”appears at higher Re_α numbers,but withonly one secondary vortex.At the early stage of the starting vortex formation,the flow islaminar;at the later stage,the flow transforms into turbulent flow.The velocity distribution inthe flow field is measured with the multiwires installment.The calculational results are comparedwith the results of experiment,and both are in agreement with each other.     

FE Simulation for Internal Inversion of Aluminium Alloy Tube

1 Introduction A double-walled invertube is difficult to fabricate other than applying inversion process. Such kind of invertube can be used as impact energy absorbing element in transport vehicles, like aircrafts and automobiles. Reddy T Y[1] did the analysis of Internal inversion and calculated the inversion load. Reid[2] et al. examined nosing and internal inversion of cold drawn steel tube by the finite element package ABAQUS. Recently, Rosa P A[3] et al. investigated Internal invers…     

基于数字运算的PSD调理电路设计

介绍了基于数字运算的PSD调理电路思想及具体线路构造,该电路避免了模拟运算的缺陷,提高了精度和可靠性.