大窝山隧道进口围岩快速掘进施工组织与管理

结合工程概况及工程特点,从机械设备配置、劳动力组织、现场管理等方面介绍了大窝山隧道进口Ⅱ级,Ⅲ级围岩段的快速掘进施工组织与管理措施,为类似隧道的快速掘进施工组织与管理提拱了相关经验.     

引水发电系统无压隧洞中弃水堰位置的数值模拟研究

水电站引水发电系统无压隧洞中的水力过渡过程是近年来电站设计中出现的一个新课题,特别是流域梯级电站开发中经常遇到。结合工程实例应用扩散法,给出了无压隧洞水力过渡过程数值模拟的基本方程以及上下游及弃水堰等边界附加方程,模拟了弃水堰布置在不同位置下,无压隧洞内的水位变化过程。研究成果和讨论对实际工程应用具有参考意义。     

国产掘进机在龙门滩引水隧洞施工中的应用

在长隧洞的施工中，采用掘进机施工的工程越来越多，特别是国外掘进机的引进，加快了长隧洞工程的开发。而国产掘进机由于其性能和材质方面的原因，存在着一定的技术缺陷．通过国产SJ-45型掘进机在龙门滩工程的施工应用，分析和总结了SJ-45型掘进机的机械性能和存在的技术问题及处理结果，以利于国产掘进机的科研、生产和施工。     

Schwingfestigkeit von Schraube‐Mutter‐Verbindungen

High cycle fatigue of bolted connections Extensive tests regarding the influences on the fatigue of bolt‐nut‐connections of preloading with torsion, of preloading with yielding, of loading with superimposed bending and of the tested lot are processed. These influences are not yet known according to VDI 2230. New testing devices were designed for these tests, which allow a far less expensive operation and may easily be used for bolts of diameters up to M100 and testing frequencies up to 1000 Hz. The validity of fatigue resistance according to VDI 2230 is specified with respect to the test results. The determined influence of the tested lots is unexpectedly high. The manufacturing process of bolts should be improved to minimize this influence.     

嵌入式实时操作系统μC/OS-Ⅱ在C8051F020上的移植

通过对嵌入式实时操作系统应用背景的分析，论述了在嵌入式控制系统中采用嵌入式实时操作系统的必要性.简略介绍了源代码开放的嵌入式实时操作系统μC/OS-Ⅱ及微控制器C8051F020的特点，重点阐述了μC/OS-Ⅱ在以微控制器C8051F020为运行平台的移植.对μC/OS-Ⅱ的移植条件及各个组成模块进行说明，讨论了移植过程中遇到的问题，并对需要编写的底层硬件的相关函数进行了深入细致的分析，提出了相应的示意性代码.在此基础上，根据实际系统的要求优化改进了原有的任务堆栈结构.     

水下灌浆隧道围岩应力与位移分析

目前对隧道围岩的应力与位移分析，其前提都是以围岩为均质材料，而灌浆隧道的围岩是由两层不同力学性能材料构成的夏合结构，其应力与位移特点不同于均质围岩。基于岩体的弹脆塑性模型及非关联流动法则，考虑地下水压力的作用，对灌浆隧道围岩的应力与位移进行理论分析，获得了围岩位移曲线。     

UNIX系统发展综述

本文首先分析ＵＮＩＸ的４个发展阶段以及各阶段取得成功的原因，然后在安全性，多处理机，实时处理，微内核，国际化和流机制等几个方面说明ＵＮＩＸ在技术上的发展近况，指出要解决的问题，最后说明了它面临的新挑战。     

柳海矿运输大巷返修工程深部软岩支护设计研究

通过现场调查、室内试验以及理论分析,柳海矿运输大巷支护现状进行分析研究,总结破坏原因。根据现场工程地质条件、岩石特性和破坏特点,确定软岩变形力学机制为高应力膨胀性软岩,并提出采用预留刚隙柔层支护技术进行支护。     

The appropriateness of the systematic framework to develop diagnosis procedures of nuclear power plants—an experimental verification

It has been well recognized that a diagnosis procedure that allows operators to successfully identify the nature of an on-going event is inevitable for an effective and appropriate recovery. Unfortunately, studies for a framework that can suggest a unified and consistent process in constructing a serviceable diagnosis procedure seem to be scant. Thus, Park et al. have suggested a systematic framework that can be used to construct a useful diagnosis procedure. In addition, the diagnosis procedure that is currently in use at the reference nuclear power plant (NPP) is reformed in order to demonstrate the appropriateness of the suggested framework. However, the necessity of a well-designed experiment is proposed to confirm the appropriateness of the suggested framework.In this regard, in this study, an experiment is conducted using a full-scope simulator of the reference NPP. From the experiment, two sets of operators' diagnosis performance data are collected, and then they are compared to investigate the change of an operator's diagnosis performance with respect to two types of diagnosis procedures.As a result, it is shown that an operator's diagnosis performance is improved when the revised diagnosis procedure is used. Therefore, it is reasonable to conclude that the suggested framework is useful in constructing an effective diagnosis procedure.     

梯级水电厂集中控制运行模式探索

介绍了清江梯级电厂从单一电厂管理向多电厂集控管理转变的情况及存在的问题,并探讨了改进办法.