TRANSFER FUNCTION MODEL ORDER AND PARAMETER ESTIMATION

Abstract. A distributed lag model with a rational transfer function is considered. We have demonstrated that the C -table can be used to determine the orders of the rational transfer function and the Padé table can be used to estimate the parameters of an identifiable transfer function. In case the model is not uniquely identified, the C -table reduces possible competing models to only a few for further examination. Padé approximant gives consistent initial values for possibly more efficient iterative procedures to estimate the coefficients of the identified model. Some asymptotic results on the estimation of the C -table and the Padé table are given. A few examples are presented to demonstrate the effectiveness of the method.     

基于ARX模型的压电智能结构振动预测控制

采用预测控制法对压电智能结构的振动主动控制进行了实验研究，通过实验方法建立了系统的ARX模型，并在此基础上设计了预测控制器对结构进行振动主动控制。实验结果验证了该方法在压电智能结构振动主动控制中的可行性和有效性。     

CDMA时变色散信道的两级盲辨识算法

本文通过对时变信道的扩展函数在时频域进行正则采样，得到了CDMA时变系统的离散正则模型。针对该模型提出了一种具有较低运算量的两级盲辨识算法。为避免两级算法产生的误差传播效应，文章将理想SIMO模型等效为加性噪声模型来处理。与基展开模型方法相比，该算法具有不需利用观测数据的高阶统计量估计展开基频率的优点。文章通过仿真验证了该算法是可行的。     

竹坑水库大坝安全鉴定分析

在竹坑水库大坝安全鉴定中,认真分析了该工程存在的主要问题,并针对大坝的结构稳定和渗流稳定作了详细的分析论证.     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258     

基于支持向量机的岩爆识别模型

岩爆的发生受多种因素的影响,这些因素关系错综复杂,以不同的特征和组合对岩爆产生综合影响,为科学、充分地利用现有的有限工程资料,本文从地下洞室围岩最大切向应力、岩石的单轴抗压强度和抗拉强度以及岩石冲击倾向指数四个主要因素出发,提出了基于支持向量机的岩爆识别模型,较好地解决小样本、非线性、高维数、局部极小点等的实际问题。     

自聚焦棒耦合性能的分析

本文采用光线光学的原理分析了自聚焦棒（ＧＲＩＮ）的光学性能，在折射率分布为抛物线近似的条件下，推导出较为简单的ＧＲＩＮ中的光线轨迹方程，并实验测量了ＧＲＩＮ的耦合效率，从而由理论和实验两方面讨论ＧＲＩＮ的聚焦特性。     

The minimum squared euclidean distance of multi-h phase codes

The minimum squared Euclidean distance(MSED) of binary multi-h phase codes is presented. The signal segregation degree(SSD) has been put forward to determine MSED of multi-h phase codes. In order to maximize MSED, SSD should be as large as possible. The necessary and sufficient conditions of maximizing SSD are derived. Finally, SSD and the exact formulae for MSED of binary 2-h phase codes are also presented.     

梯度折射率棒中传播的高斯光束轨迹解析解及其存在条件的讨论

本文提出光束轨迹方程的一般解，导出解析解的存在条件，推广了文献［１］的光线传播理论，文中以一特定梯度折射率棒为例，讨论了高斯光束在棒中的传播特性。     

合成彩色立方氧化锆的宝石学特征

市场上出现的紫色、浅紫色、浅黄色、粉红色、酒黄色、黄褐色、红色人造立方氧化锆均为亚金刚光泽, 火彩明显; 密度为5.99～6.34 g/cm3, 相对硬度为8～9; 除粉红色者表现出非均质性和弱多色性且内含大量定向排列的白色脱溶物外, 其余的为均质性, 内部洁净; 不同颜色的立方氧化锆的吸收光谱、紫外荧光以及滤色镜下的变色情况均存在差异; 浅紫色立方氧化锆的吸收光谱特征表明它是Nd致色. 能谱分析结果表明: 彩色立方氧化锆的常见元素有Zr, Y, P, Hf, Ca等; Er, Ce, Fe分别是粉红色、红色、酒黄色立方氧化锆的致色元素; 当Y2O3的摩尔分数大于或近于7%时, 立方氧化锆为立方面心结构且内部洁净; 当Y2O3的摩尔分数小于5%时, 立方氧化锆表现为非均质性且内含大量定向分布的白色脱溶物. 用拉尔森改写的格拉斯顿-代尔公式计算其近似折射率为2.12～2.19.