中山包水电站钢岔管设计

中山包水电站钢岔管在天生桥二级水电站 6号压力钢管下平段分岔 ,岔管HD值达 15 40m2 ,结构体形复杂 ,采用NK HITEN780A Z35和NK HITEN6 90B高强度钢材制造安装 ,在国内水电工程中实际应用较少。文章着重介绍岔管的布置、结构分析和焊缝的无损检验要求。中山包水电站的正常发电运行 ,为 80kg/mm2 级高强钢在国内水电行业的应用提供了第 3个成功实例     

光纤光栅的长度对其峰值反射率的影响

利用耦合模理论,数值分析了当光纤光栅(FBG)折射率变化为均匀分布、直流切趾高斯分布时,光纤光栅长度对其峰值反射率的影响。研究结果对光纤光栅外腔半导体激光器的设计和性能优化具有重要的意义。     

自动焊技术在涩宁兰输气管道X70钢试验段上的应用

通过涩宁兰输气管道X70钢试验段的施工,进一步探索和完善自动焊接技术在高强钢管道焊接中的应用。文章介绍了该试验段施工的焊接设备、焊材和焊接工艺,可为同类焊接工程提供借鉴。     

On using peak amplitude and rise time for AE source characterization

Acoustic Emission (AE) signals, which are electrical version of acoustic emissions, are usually analysed using a set of signal parameters. The major objective of signal analysis is to study the characteristics of the sources of emissions. Peak amplitude(P _a ) and rise time(R _t ) are two such parameters used for source characterization. In this paper, we theoretically investigate the efficiency ofP _a andR _t to classify and characterize AE sources by modelling the input stress pulse and transducer. Analytical expressions obtained forP _a andR _t clearly indicate their use and efficiency for source characterization. It is believed that these results may be of use to investigators in areas like control systems and signal processing also     

发电机用DJL350磁极钢板的开发与应用

本文论述了高强度冷轧磁极板的试制性研究，应用性研究及在开生桥机组上的实施。通过与国外材料的对比，研究了材料的化学成分、力学性能、磁性能、金相组织及其与性能的关系。并对其实际应用效果进行了分析总结。     

电转化法转化钝顶螺旋藻转化条件的研究

确定了电转化法转化钝项螺旋藻S6-4的转化条件。无论受体是藻丝还是单细胞／藻丝段，钝项螺旋藻S6-4在对数生长期内，半致死电场强度无显著差别。实验表明以对数中期的螺旋藻用于转化为宜。当脉冲时间是5．0ms时，藻丝受体和单细胞／藻丝段受体的半致死电场强度分别是3．75—5．0kV／cm和3．1—4．4kV／cm，而电击缓冲液分别是1．0mmol／L HEPES(pH7．5)缓冲液和含有0．5mol／L蔗糖的1．0mmol／L HEP—ES(pH7．5)缓冲液。本文的研究结果为螺旋藻转化及外源基因表达提供了实验基础。     

Studies on chitin 3—effect of coagulants and annealing on the preparation and the properties of chitin membrane

Chitin membrane was prepared by casting a N,N-dimethyl acetamide, N-methyl 2-pyrrolidone and lithium chloride (DMA-NMP-LiCl)solution of chitin and coagulating with several media. The effect of the coagulants on membrane formation was studied. 2-Propanol was found to be more favourable than methanol, ethanol, acetone and mixtures of 2-propanol and water. The membrane obtained in 2-propanol was subjected to annealing. Annealing made the membrane dense and strong. The tensile strength of the membrane annealed at 145°C for 2hr was about twice that of an unannealed membrane. The solute permeability of the annealed membranes was lower than that of the original one. These phenomena could be clearly interpreted in terms of crystallinity.     

Mechanical and thermal properties of HVOF sprayed Ni based alloys with carbide

The objective of the present study is to develop multi-functioned coating to the components, which are made of copper with electroplated Ni and are widely used for steel making industry. In this paper, we report the mechanical and thermal properties of Ni based superalloys with carbide sprayed by high velocity oxygen fuel (HVOF), and the detailed effects of sprayed material, spraying conditions, and initial powder structure on these properties. It was found that, among commercial Ni self-fluxing alloys (without fusing treatment), coating with a carbon content of 0.58 mass% had the most preferable properties, with a good balance of the hardness, strength, and thermal shock resistance. The thermal shock resistance depended not only on the strength of the coating but also on the volume contraction when tested at high temperatures. For the several developed Ni based superalloys with carbide, Ni20Cr8Mo5Fe–WC and Ni16Cr15Mo3–WC demonstrated the prominent adhesion strength and thermal shock resistance with high Galvanic corrosion resistance through optimized spraying condition. Also, 20 mass% NiCr–Cr₃C₂ coating sprayed by using employed relatively small primary particle succeeded in achieving the multi-superior properties; high adhesion strength, high corrosion resistance and thermal shock resistance.     

再论“用离心机作静力结构模型试验”

 本文通过最近所作的两个离心模型试验,进一步探讨了用离心机作静力结构模型试验的有关问题,试验结果进一步证明用离心机作静力结构模型试验,无论在理论上和试验技术上都是可行的,最后将有关问题作了进一步的讨论。     

基于有限元分析的金刚石钻头强度验算公式

在对81／2B125金刚石钻头进行有限元计算分析后，找出最大应力点在金刚石钻头冠部切削告处。通过改变各相关尺寸和结构型式，用有限元法模拟试验过程，在给定结构参数和工艺参数情况下获得多组数据。根据专业知识，参考有限元计算获取的各组数据变化特征，选出拟合较好的公式类型，再采用回归分析方法确定待定系数，最后得出工程上实用的金刚石钻头强度验算公式。用这个公式对81／2B461W和121／4B331金刚石钻头进行了强度验算，经改进设计后钻头在现场使用取得了良好的效果。