新型呋咱(氧化呋咱)类炸药爆轰参数的理论计算

以3,4-二(氨基呋咱基)氧化呋咱(BAFF)为结构单元设计了一类新型呋咱(氧化呋咱)类炸药分子.运用预测炸药分解产物的BW法则、计算爆速的Rothsteine方法和计算C-J压力的库珀方法等对该类炸药的爆炸参数进行了理论计算,并与HMX等炸药的爆炸参数进行了比较.结果表明,该类炸药的密度大,爆速和爆压介于TATB和HMX之间,是一类新型高能量密度材料化合物.由于该类炸药分子中含呋咱环具有芳香性,预测其分子的稳定性良好.     

Electrochemical behaviour of indium ions in molten equimolar CaCl2–NaCl mixture at 550 ∘C

The stability of indium chloride and oxide as well as the electrochemical behaviour of indium ions have been studied in the equimolar CaCl2–NaCl melt at 550 C by X-ray diffraction (XRD) and different electrochemical techniques, using molybdenum and tungsten wires as working electrodes. Voltammetric and chronopotentiometric studies showed signals attributed to the presence of three oxidation states of indium, i.e. 0, i and iii. The standard potential of the redox couples, as well as the solubility products of indium oxides have been determined, showing that In(iii) ions are completely reduced to monovalent indium by the indium metal according to the reaction: In () + 2 In 3 In () and that In₂O is a strong oxide donor according to the reaction: In₂O(s) 2 In() + O^2- These results have allowed the construction of E-pO2– equilibrium diagrams summarising the properties of In–O compounds. The electrodeposition of indium was uncomplicated at Mo and W electrodes. Very good adherence of liquid indium to the electrode materials was observed, with the formation of Na–In alloys at highly reducing potentials, and there was no evidence of indium dissolution into the melt. Moreover, the voltammograms corresponding to the electrochemical In(iii)/In(i) exchange were well defined. The two electrochemical steps were found to be quasi-reversible, and the values of the kinetic parameters, ko and , for both reactions, as well as the diffusion coefficients, DIn(III) and DIn(I) were calculated.     

Time Dependence and Moments of a Family of Time-Varying Parameter Garch in Mean Models

Abstract.  In this paper we consider the time series dependence, stationarity, and higher moments issues of a family of first-order conditionally heteroskedastic in mean models with a possibly time-varying mean parameter. The interest in these models lies in the fact that economic theory and physics often require the connection between the first and second conditional moments of time series. Our results reveal important properties of these models, which are consistent with stylized facts in financial and turbulence data sets. They can also be employed for model identification, estimation, and testing.     

复杂制品注塑成型模拟分析

应用CAE软件MoldflowPlasticsInsight4.1的充模、保压、冷却、翘曲等分析模块,对汽车尾门饰件注塑成型过程进行CAE分析,研究了浇口位置、工艺参数等对制品性能的影响。最后,基于模拟结果分析了制品翘曲的主要原因,为模具设计及注塑工艺的确定提供参考。     

自适应布谷鸟搜索算法

为了使布谷鸟搜索算法(Cuckoo Search,CS)在保持强大的全局搜索能力的同时,尽可能地提高局部搜索能力,在深入分析CS算法机理的基础上,将CS算法中影响布谷鸟搜索路径步长的参数β和布谷鸟蛋被发现(淘汰)的概率p_a由固定值改为随搜索过程自适应变化的动态参数,将越界的鸟窝折返回边界内、在当前代最优鸟窝附近的区域随机建立1个新的鸟窝、而非折返回边界上重新建立鸟窝,以提高算法的局部搜索能力和收敛速度。改进后的CS算法称为自适应布谷鸟搜索算法(Adaptive Cuckoo Search,ACS)。通过8个标准测试函数分别测试了CS算法和ACS算法的性能,结果表明,无论是简单的单峰函数还是复杂的多峰函数,无论是小型的低维函数还是大型的高维函数,ACS算法的寻优性能均超过CS算法。     

WALL AND PARTICLE-SHAPE EFFECTS ON HEAT TRANSFER IN PACKED BEDS

The effective radial thermal conductivity and apparent heat transfer coefficient for a packed bed were experimentally determined for beds of spheres, full cylinders and hollow cylinders, for flow rates giving particle Reynolds numbers in the range 100-1000, and for tube to particle diameter ratios of 5-12. Over these ranges the radial Peclet number Pe_r showed significant dependence on solid conductivity, gas flow rate and particle shape, while the wall Biot number Bi showed significant dependence on tube to particle diameter ratio, gas flow rate and particle shape. These dependencies were predicted well by equations incorporating the effects of these variables into individual gas and solid phase parameters, which were then combined to give the effective or lumped parameters     

基于自由运动一维标定物的多摄像机参数标定方法与实验

一维标定方法易于实现且标定效率高,为了克服现有一维标定方法的一些不足,本文提出一种用一维标定物标定多摄像机内外参数的方法,首先进行两两标定,在此过程中,假定主点坐标近似已知而仅考虑畸变、焦距、旋转和平移等参数,接着利用基本矩阵及一维标定物上特征点之间的几何约束,估计两摄像机的内外参数,两两标定完成后,采用Dijkstra最短路径法和捆绑调整对多摄像机系统进行全局标定(含主点坐标),仿真和真实实验表明本文的方法是切实有效的.     

局部颜色特征与工艺参数融合的铜浮选入矿类型识别

针对铜浮选过程中矿源变化频繁而造成的浮选工况难以识别、生产过程不稳定等问题,在分析铜浮选流程特点的基础上,提出了一种局部颜色特征与关键工艺参数融合的铜浮选入矿类型识别方法.首先采用多元图像处理方法提取泡沫图像局部颜色特征,然后采用混合滤波、时间配准算法将其与关键工艺参数进行数据融合,最后用融合后的混合特征进行模糊聚类,得到隶属度矩阵和聚类中心.工业数据仿真结果验证了本文所提方法的有效性.