不同助烧结剂及造孔剂对SiC多孔陶瓷的影响

采用真空烧结方法制备了SiC多孔陶瓷，研究了不同助烧结剂Al2O3-Y2O3、Si以及不同造孔剂丙烯酰胺聚合物、羧甲基纤维素（CMC）对SiC多孔陶瓷形貌和气孔率的影响。结果表明：与Si相比较，Al2O3-Y2O3更有利于促进SiC的烧结；以Al2O3-Y2O3为助烧结剂的试样比以Si为助烧结剂的试样具有较高的气孔率。     

Thermoporometry as a new tool in analyzing mesoporous MCM-41 materials

Thermoporometry, a calorimetric procedure, is applied for measuring the pore size distribution, pore volume and surface area of mesoporous MCM-41 molecular sieves using water as the adsorbate. A series of MCM-41 materials with various pore diameters was synthesized and subjected to the new method. The results are compared with nitrogen physisorption. Both methods are complementary, whereby the former provides also information about the pore shape. MCM-41 materials with pores wider than 50 Å also allow the use of benzene as the adsorbate in thermoporometry.     

喷雾低水熄焦技术在济钢的应用

采用喷雾低水熄焦技术对原熄焦系统进行了改造,解决了喷嘴堵塞及喷淋效果不好等问题。熄焦时间缩短了50～80s,用水量减少了20%～40%,焦炭水分降低了1%。同时,还稳定了高炉操作,使焦比降低了1.2%。     

牙舟泥哨

牙舟泥哨作为民间陶制玩具在数百年的发展中逐渐形成了自己的风格和个性，在造型、审美上带有独特黔南地方特色。本文从造型和审美的角度对牙舟泥哨进行了分析。     

Atomization of metal fluorides for enhanced flow characteristics of a multicomponent powder

The National Aeronautics and Space Administration's (NASA's) PS304 coating is a plasma spray deposited tribological coating with feedstock composed of NiCr, Cr₂O₃, Ag and BaF₂-CaF₂ powders. The effects of rounded BaF₂-CaF₂ particles on the gravity-fed flow characteristics of PS304 feedstock have been investigated. The BaF₂-CaF₂ powder was fabricated by water atomization using four sets of process parameters. Each of these powders was then characterized by microscopy and classified by screening to obtain 45-106 μm particles and added incrementally from 0-10 wt.% to the other constituents of the PS304 feedstock, namely nichrome, chromia and silver powders. The relationship between feedstock flow rate, measured with the Hall flowmeter, and concentration of fluorides was found to be linear in each case. The slopes of the lines were between those of the linear relationships previously reported using angular and spherical fluorides and were closer to the relationship predicted using the rule of mixtures. The results offer a fluoride fabrication technique potentially more cost-effective than gas atomization processes or traditional comminution processes.     

孔隙水压力与恒定时间对砂岩变形的实验研究

探讨三峡库水位在145-175 m之间涨落及蓄水时水压对岩（石）体的变形特性影响。以实验为基础,进行了不同轴向应力（1σ=55.54,34.18和12.82 MPa）条件下,周期孔隙水压力（Pmin=2 MPa,Pmax=6 MPa）与上、下限恒定时间（ΔT=120和240 s）作用下砂岩的变形特性实验。通过分析1ε-T与p-T关系曲线和p-1ε滞回曲线,可知：1ε-T砂岩曲线呈连续正弦波形演化,当孔隙水压力加载时,应变减小;上限恒定时,应变持续减小到谷值;卸载时,应变逐渐增大;下限恒定时,应变持续增大到峰值。砂岩p-1ε滞回曲线的2个阶段变化,一是微孔隙压密阶段,未形成明显的滞回曲线;二是孔隙水压力耦合阶段,形成了稳定的滞回曲线,表现形式由疏变密,并且稳定的滞回曲线呈逆时针演化。还对比了不同轴向应力和不同恒定时间条件下,每个p-1ε滞回曲线的四区段（加载段、卸载段、上限恒定段和下限恒定段）的Δε-n关系曲线。     

基于聚类人体体型分类法的体型反算方法研究

用聚类法将大量人体样本尺寸数据进行体型分类。是目前较先进的一种人体体型分类方法．但分类后若根据个体尺寸数据反向判断其所属的聚类体型则较为困难．本文经过多个设计方案,对实际测量的人体数据进行分析计算和对比,得出一种效果好、计算量小的实用反向判断方法．     

多孔形状记忆合金表面羟基磷灰石涂层的沉积

燃烧合成法制备的多孔Ti50Ni48Fe2形状记忆合金具有三维连通的孔隙结构,其平均孔隙尺寸约为350μm。采用化学法即酸液和碱液处理后在模拟体液中浸泡一定时间可在多孔形状记忆合金表面沉积出羟基磷灰石涂层.     

辽宁地区农村住宅的节能研究

针对我国辽宁地区现有农宅普遍存在的采暖能耗高而居住热环境差的问题,通过对农村住宅的体型系数、平面节能设计、围护结构等方面进行充分分析,提出适合辽宁农村住宅的保温节能措施,从而增强农宅保温隔热能力,提高室内热舒适度。力求使辽宁农村住宅在经济、技术和节能方面均达到新农村建设的要求。     

多孔介质中有效孔扩散系数的试验测量

提出了通过实时测量扩散过程中多孔介质浮重变化,直接测定有效扩散系数的方法.首先建立了联系有效扩散系数和试件浮重变化的数学模型,并求出了该模型的解析解;利用非线性超定方程组优化求解的方法,结合问题的解析解和实测数据,反求出模型中的参数,有效扩散系数和边界层传质系数.用上述参数预测的试件浮重变化与实测浮重变化相差很小.表明该方法的实用性和可靠性.