On the improvement of detection characteristics of trans-stilbene crystals by improving crystal perfection

Organic molecular scintillating crystals are noted for their good timing and particle discrimination process. Trans-stilbene is one such candidate noted for its good particle detection characteristics for the past five decades. Progressive strengthening of detection characteristics of trans-stilbene has been attempted by improving crystal perfection. A series of timing resolution studies have been carried out for the Bridgman grown trans-stilbene crystals under different experimental conditions. The results were compared with the previously reported values. Pulse shape discrimination process has been carried out for ²⁴¹Am and ²⁵²Cf sources and good discrimination has been obtained for gamma-alpha and gamma-neutron sources from the grown organic phosphor crystal. Electronic Publication     

精密陶瓷部件近净成型技术的发展

重点介绍了近十年发展起来的陶瓷部件的近净成型技术 ,主要包括直接凝固注模成型、凝胶注模成型、陶瓷注射成型、陶瓷无模成型和微注入成型。对这些新的成型方法的原理、工艺过程及应用特点进行了较全面的分析与比较。     

Combined shape and sizing optimization of truss structures

 In this paper, an evolutionary optimization method is presented for weight minimum problem of a 3-dimensional truss structure in terms of nodal coordinates and element cross-sectional areas. The structure is subject to stress, local buckling and displacement constraints. Two types of design variables with different natures are optimized separately: (1) a fully stressed design (FSD) and scaling techniques are applied to sizing variables and (2) the evolutionary node shift method is applied to shape variables. Alternating procedure is utilized to couple the two types of variables and to combine the results. The optimum solution is achieved gradually from the initial configuration design. Two typical truss structures are examined to illustrate the validity of the method. Received: 22 October 2001 / Accepted: 04 June 2002 This research work is supported by the National Natural Science Foundation of China under the guarantees no. 10072050 and 10172072, respectively.     

复杂压力系统地层压力预测方法在文东油田的应用

建立了复杂压力系统地层压力预测方法的数学模型 ,并利用文东油田文 13块已钻井的测井资料、采油注水井的地质资料 ,预测了 4口调整井的孔隙压力、坍塌压力、破裂压力 ,并据此推荐了实钻时所采用的钻井液密度 ,取得了良好的施工效果     

Spray forming technology for military applications

Over the past five years, the Annapolis Detachment, Carderock Division, Naval Surface Warfare Center (formerly David Taylor Research Center) has established a state- of- the- art spray forming facility for the study and exploitation of this near net shape manufacturing process. Spray forming is a single step gas atomization/deposition process which yields ferrous and nonferrous, near final shape, near fully dense preforms that has proven to be a viable and cost effective alternative to conventional metalworking technology for the production of material preforms with properties surpassing those of their cast and wrought counterparts. Current programs at Carderock Divison Naval Surface Warfare Center are aimed at optimization of the process, certification of the spray formed products and industrialization of the technology.     

A new method of characterization for stratified thermal energy stores

A new method for characterization of stratified thermal energy stores (TES) that integrates both the first law and the second law concerns is presented here. The first law concern is incorporated into a quantity called energy response factor and the second law concern into an entropy generation ratio. A product of these two quantities is at the heart of the TES efficiency definitions. This approach removes the overemphasis of the existing methods either on the first or the second law of thermodynamics which often biases the characterization results. The information about the evolution of the temperature field of the system in time is the prerequisite of the new method. It may be obtained from experiments or from suitable numerical simulations. The current method can be easily integrated into computational fluid dynamic (CFD) simulations and thus facilitate CFD-based design analysis. As an example of such CFD-integrated analysis, a large-scale hot water seasonal heat store is numerically studied to identify the effects of aspect ratio, containment shape, internal structures, and containment size on their efficiency. The results suggest the effectiveness of the new method in deriving useful design insights.     

非洲爪蟾卵提取物中200nm膜泡与环形片层及核被膜上核孔复合体形成的关系

将ＬａｍｂｄａＤＮＡ引入活化的非洲爪蟾卵提取物中，在由磷酸肌酸与磷酸肌酸激酶构成的ＡＴＰ再生系统的参与下，在这种非细胞体系中能够围绕由ＬａｍｂｄａＤＮＡ诱导形成的染色质重建核被膜结构，同时在染色质外出现类似核被膜结构的环形片层。在这两种膜结构中核孔复合体的形成都与直径２００ｎｍ左右的单层圆形小膜泡密切相关，这些小膜泡可以附着在染色质表面或独立于染色质之外相互融合成扁平囊状的双层膜片层，双层膜进一步融合形成核孔，与此同时，核孔复合体在核孔上完成装配。     

基于最小截面差的相位展开

相位展开 (PhU)问题从理论上讲是一个不适定问题。根据被测物理量的整体连续性 ,提出了一种基于最小截面差的相位展开方法。理论分析和对实验条纹图的处理结果表明 ,该方法特别适合于具有相位间断大于π ,条纹欠采样及随机噪声等条纹图的相位展开。同支切 (Branchcuts)法相比 ,该方法具有算法简单、计算量小且可靠度高的特点 ,具有一定的实用性。     

铜基催化剂孔隙率对气体有效扩散系数的影响

研究了18种具有不同孔结构参数的粒状铜基甲醇合成催化剂孔隙率对有效扩散系数的影响。结果发现，催化剂微孔孔隙率增大，曲节因子亦增大，扩散阻力增加。将孔隙率与催化剂曲节因子关联，得到了半经验方程，用它可估算催化剂的曲节因子。     

工业化陶瓷超滤膜的表征

以液-液排除法测定工业化陶瓷超滤膜的孔径及孔径分布，比较了两种渗透体系对测定结果的影响；用已知分子量标准物质考察了不同膜的截留行为，获得了各膜的切割分子量值，并分析了截留率与孔径的对应关系，为工业化陶瓷膜的开发提供依据。